Consent and compliance

How to run the FMCSA Clearinghouse pre-employment query for CDL drivers (2026)

On this page
  1. Who has to run the pre-employment query?
  2. How do you run the query, step by step?
  3. What is the difference between a full and a limited query?
  4. What if the driver refuses consent, or the system is down?
  5. Does the query replace calling previous employers?
  6. What happens after the hire?
  7. What the Clearinghouse does not tell you
  8. Clearinghouse pre-employment query at a glance
  9. Questions people ask

Before a CDL driver performs any safety-sensitive function for you, you must run a full pre-employment query of FMCSA's Drug and Alcohol Clearinghouse (49 CFR 382.701), and the driver must approve it electronically inside the Clearinghouse (382.703). You register, buy a query plan at $1.25 per query, enter the driver's CDL, and the driver logs in to consent; if the record shows an unresolved violation, the driver may not drive for you until the return-to-duty process is complete, as of November 2026.

The query sits next to the pre-employment drug test, not instead of it: both are required. The test and the rest of the DOT program are covered in DOT drug testing requirements for employers.

Not legal advice. This page summarizes 49 CFR Parts 382 and 391 on eCFR (up to date as of November 10, 2026) and FMCSA's own Clearinghouse pages and FAQs, checked as of November 2026. FMCSA updates its FAQs and screens; follow the Clearinghouse's current instructions where they differ.

Who has to run the pre-employment query?

  • Every employer of a CDL driver subject to Part 382, including government employers, before the driver performs a safety-sensitive function (382.701(a)).
  • Owner-operators, who are both employer and driver and must designate a consortium or third-party administrator (C/TPA) in the Clearinghouse (FMCSA FAQ, queries and consent requests).
  • Driver staffing agencies that run their own DOT program register as employers; agencies that only perform the carrier's querying and reporting register as C/TPAs; agencies doing both keep two separate accounts (FMCSA FAQ, registration). More in drug testing for staffing agencies.
  • Not required: employers of drivers who perform only FTA-regulated functions (Part 382 does not apply to them, per 382.103(d)(1)), and employers of CDL holders who drive only non-CDL vehicles, who may query but need not.

How do you run the query, step by step?

  1. Register the company. Every employer must register before querying (382.711). FMCSA's registration FAQ says each authorized user needs their own Login.gov credentials. FMCSA is replacing the FMCSA Portal, through which carriers have managed Clearinghouse users, with its new Motus registration system in phases (FMCSA notice, April 29, 2026), so follow the sign-in steps the Clearinghouse shows you. Registration lasts five years and is cancelled if the account has not queried or reported for two years (382.713).
  2. Buy a query plan. FMCSA's query plan page lists a flat $1.25 per query, limited or full, as of November 2026. Plans are bought only in the Clearinghouse, queries never expire, and a C/TPA cannot buy them for you. If a limited query finds a record and you follow up with a full query, you are charged once.
  3. Designate your C/TPA, if one will query on your behalf. It must be registered first, and you must update the designation within 10 days of a change (382.711(b)(3)).
  4. Ask the driver to register. Drivers do not have to register in general, but a driver must have an account to give the electronic consent a pre-employment query needs (Clearinghouse registration). Tell the driver at the application stage so the request does not sit unanswered.
  5. Enter the driver's CDL number and state and request a pre-employment (full) query. The Clearinghouse sends the consent request to the driver.
  6. The driver approves the request in the Clearinghouse. Under 382.703(b), the consent covers verified positive, adulterated or substituted results, alcohol results of 0.04 or higher, refusals, an employer's report of actual knowledge of prohibited use, and the return-to-duty and follow-up records. A paper signature does not replace it.
  7. Read the result. "Not prohibited" clears this step. If the record shows a violation, you may not use the driver for safety-sensitive work unless the record also shows the SAP process completed and a negative return-to-duty test (382.701(d)). If follow-up testing is still running, you may hire only if you take over managing it (382.701(d)(2)).
  8. Finish the rest of the file. The pre-employment drug test with a verified negative (382.301), the motor vehicle record and the safety performance history (391.23), and any other DOT agency's history under 40.25. The MVR step is explained in motor vehicle record checks.

What is the difference between a full and a limited query?

ItemFull queryLimited query
Used forEvery pre-employment query; follow-up when a limited query finds a recordThe annual query of current drivers
What it showsThe details of any resolved or unresolved violationOnly whether a record exists
Driver consentSpecific electronic consent in the Clearinghouse before each full queryGeneral written consent outside the Clearinghouse, which may cover more than one year
Price (November 2026)$1.25 per query either way, from the employer's query plan
Source382.701(a)-(b); FMCSA query plans; FMCSA FAQ

If a limited query on a current driver shows a record, you have 24 hours to run a full query; after that the driver must stop safety-sensitive work until the full query is done and shows no prohibition (382.701(b)(3)).

  • Refused or ignored consent: the driver may not perform safety-sensitive functions for you (382.703(c); 391.23(f)(2)). A recruiter may explain the request; only the driver can approve it.
  • Clearinghouse outage: FMCSA's FAQ says that if a technical problem stops queries, it will post a notice on the Clearinghouse home page allowing employers to hire using the manual inquiries in 391.23(e); without that notice, the query is required. Once the system is back, you must run the pre-employment query, and a prohibited result means removing the driver at once.

Does the query replace calling previous employers?

Partly. Since January 6, 2023, FMCSA-regulated employers must use the Clearinghouse to get drug and alcohol violation history from previous FMCSA-regulated employers (391.23(e)(4)), and FMCSA's FAQ says inquiries made any other way do not satisfy that requirement. Two gaps remain:

  • Other DOT agencies. Violations under FAA, FRA, FTA, PHMSA or Coast Guard programs are not reported to the Clearinghouse, so request them from those employers under 40.25 with the driver's written consent.
  • Follow-up testing plans. If the driver has not finished follow-up testing, request the plan from the previous employer (391.23(e)(4)(i)).

Also ask the 40.25(j) question: whether the driver failed or refused a DOT pre-employment test for any employer in the past two years. The truck driver phone screen shows how recruiters fit it into the first call.

What happens after the hire?

  • Annual query: at least once a year for every current CDL driver, tracked on a rolling 12 months from the last query (382.701(b); FMCSA FAQ).
  • Notifications: since March 8, 2023, FMCSA emails employers when new information is added to the record of a driver they queried in the previous 12 months, and asks for a full follow-on query within 24 hours.
  • Reporting: employers report refusals they determine, alcohol results of 0.04 or more, negative return-to-duty tests and completed follow-up testing by the close of the third business day; MROs report verified positives within two business days (382.705).
  • Records: a valid Clearinghouse registration satisfies the three-year query record requirement (382.701(e)); keep each driver's limited-query consent for three years (382.703(a)).

What the Clearinghouse does not tell you

  • Company test results. Non-DOT tests, such as a hair test under company policy, are not reported. FMCSA denied a 2022 request to treat positive hair tests as reportable, saying it lacks authority until HHS issues final hair testing guidelines (87 FR 79061). See hair follicle drug testing.
  • Licence status. Since November 18, 2024, state licensing agencies must check the Clearinghouse before issuing, renewing, transferring or upgrading a CDL and must downgrade drivers in prohibited status (382.725; FMCSA FAQ), but you still verify the licence through the MVR.
  • Non-CDL drivers. Their history comes only from the 391.23(e) inquiries.

Clearinghouse pre-employment query at a glance

ItemThe ruleSource
WhenBefore the first safety-sensitive function382.701(a)
Query typeFull query382.701(a)(2)
ConsentDriver's electronic consent in the Clearinghouse382.703
Cost$1.25 per query (November 2026)FMCSA query plans
Prohibited resultNo safety-sensitive work until SAP process and negative return-to-duty test382.701(d)
Other DOT modesAsk previous employers directly40.25; 391.23(e)(4)(ii)
RecordsClearinghouse keeps query history; keep limited consents 3 years382.701(e); 382.703(a)

Recruiters screening drivers can check readiness early with the truck driver screening questions, including whether the driver already has a Clearinghouse account.

Questions people ask

Is a pre-employment Clearinghouse query a full query or a limited query?

A full query. Under 49 CFR 382.701(a)(2), the pre-employment query must be a full query, which releases any violation details and requires the driver's specific electronic consent inside the Clearinghouse. A limited query can only satisfy the annual query for current drivers.

How much does a Clearinghouse query cost?

FMCSA's query plan page lists a flat $1.25 per query, limited or full, as of November 2026. Employers buy query plans in the Clearinghouse; queries never expire, and a consortium or third-party administrator cannot buy them on the employer's behalf.

What happens if a driver will not give consent for the pre-employment query?

The employer may not let the driver perform safety-sensitive functions. Section 382.703(c) bars using a driver who refuses the required consent, and 49 CFR 391.23(f)(2) says the same for the driver investigation.

Does the Clearinghouse query replace calling previous employers about drug and alcohol violations?

For previous FMCSA-regulated employers, yes, since January 6, 2023 under 49 CFR 391.23(e)(4). If the driver worked under another DOT agency, such as FAA, FRA or FTA, you must still ask those employers directly under 49 CFR 40.25, because their violations are not in the Clearinghouse.

Can a driver start driving before the query result comes back?

No. Section 382.701(a) bars employing a driver in a safety-sensitive function before the pre-employment query. FMCSA's only stated exception is a posted Clearinghouse outage, when it may announce that employers can hire under 391.23(e) and query once the system is back.