How to verify a forklift certification when there is no national license: the training record and your own evaluation
On this page
- What does "forklift certification" actually mean?
- What should a valid forklift training record show?
- How do you verify a candidate's forklift training, step by step?
- Can you rely on another employer's or trainer's certification?
- What do weak or fake forklift claims look like?
- Who verifies when a staffing agency places the operator?
- How often should you re-verify?
- When does the FCRA apply?
- Copy-ready verification and certification record
- Questions people ask
There is no national forklift license and no OSHA card to look up. Under 29 CFR 1910.178(l)(6), a "forklift certification" is the employer's own written certification that an operator was trained and evaluated, showing the operator's name, the date of the training, the date of the evaluation and who did the training or evaluation. So you verify a candidate's claim by getting that record from the former employer or trainer (with the candidate's consent), checking that the last evaluation is less than three years old and covers the type of truck your job uses, and then, the step most employers skip, evaluating the operator in your own workplace before they drive, because prior training lets you skip repeated topics, not the evaluation. Operators must also be 18 or older. Rules below are as of November 2026.
This page is about checking the training record. Questions that find out which truck and task a candidate has really worked are in the forklift operator screening questions; how a staffing agency and its client split OSHA duties in general is in OSHA rules for temporary workers.
Not legal advice. The standard was read on the eCFR, and OSHA's eTool, compliance directive CPL 02-01-028 and Temporary Worker Initiative Bulletin No. 7 on osha.gov, on November 15, 2026. States and territories with OSHA-approved State Plans (28 when OSHA published that bulletin in 2016) can add requirements, and construction forklifts fall under 29 CFR 1926.602(d).
What does "forklift certification" actually mean?
It means the employer has certified its own operator. OSHA's powered industrial truck eTool says "all powered industrial truck operators must be trained and certified by their organizations." The training and evaluation can be done by an outside company: OSHA's compliance directive, CPL 02-01-028, says the people who train, evaluate and certify operators "need not be employed by the employer of those operators," but adds that "citations for failure to train will always be issued to the employer." A wallet card from a training school is therefore evidence of training by that school, not a license that travels with the operator.
State Plans can set their own rules. California's 8 CCR 3668, for example, uses the same certification content as the federal rule: name, training date, evaluation date and the identity of the trainer or evaluator.
What should a valid forklift training record show?
| Item | Why it matters | Source |
|---|---|---|
| Operator's name | Matches the candidate | 1910.178(l)(6) |
| Date of training | Shows when formal and practical training happened | 1910.178(l)(6) |
| Date of evaluation | Must be within three years for a current evaluation | 1910.178(l)(6) and (l)(4)(iii) |
| Identity of the trainer or evaluator | Lets you confirm the record with them; trainers must have "the knowledge, training, and experience" to train and evaluate | 1910.178(l)(6) and (l)(2)(iii) |
| Types of truck trained and evaluated on | Training must cover "the types of truck the operator will be authorized to operate"; where a third party certifies, CPL 02-01-028 says the records "must identify the types of equipment" | 1910.178(l)(3)(i)(A); CPL 02-01-028 |
| Evidence of a workplace evaluation | Training must combine formal instruction, practical training and "evaluation of the operator's performance in the workplace" | 1910.178(l)(2)(ii) |
How do you verify a candidate's forklift training, step by step?
- Ask the specifics at the screen: which trucks (sit-down counterbalance, reach truck, order picker, pallet jack and so on), where they were trained, the date of their last evaluation and who ran it.
- Ask for the record, not just the card: the certification from the last employer or training company. A card is fine as a starting point if it shows the training and evaluation dates and the trainer.
- Confirm it with the source, with the candidate's written consent: the former employer's safety or training contact, or the training company. They have no legal duty to answer you, so note who you asked and when.
- Check the three-year window and the truck type. An evaluation older than three years, or on a different type of truck, means more training and a new evaluation are due: refresher training is required when "the operator is assigned to drive a different type of truck," per 1910.178(l)(4)(ii)(D).
- Check age. The Labor Department's Hazardous Occupations Order 7, 29 CFR 570.58, covers operating a "high-lift truck," defined to include "fork lifts, fork trucks, fork lift trucks"; OSHA's bulletin says it "is a violation of Federal law for anyone under 18 years of age to operate a forklift." Asking whether a candidate is 18 or older is a job requirement; see hiring minors for the wider rules.
- Train what the record does not cover, including the workplace-related topics in 1910.178(l)(3)(ii): surfaces, loads, pedestrian traffic, narrow aisles, ramps and ventilation at your site.
- Evaluate the operator in your workplace, then issue your own certification with the four required items, before they operate except under direct supervision as a trainee.
Can you rely on another employer's or trainer's certification?
For training, partly. The standard's "avoidance of duplicative training" rule, 1910.178(l)(5), says that if an operator was already trained in a topic and the training "is appropriate to the truck and working conditions encountered, additional training in that topic is not required if the operator has been evaluated and found competent to operate the truck safely." CPL 02-01-028 adds that an employer may rely on a third-party trainer's certification for a particular type of truck.
For responsibility, no. In its answer on operators who work for more than one employer, the same directive says "Each employer for whom an employee works is responsible for ensuring that the employee has been trained," and 1910.178(l)(1)(ii) says that before permitting an employee to operate a truck, except for training purposes, "the employer shall ensure that each operator has successfully completed the training required," except as (l)(5) allows. In practice: accept the record to shorten training, but run your own evaluation on your truck in your building and sign your own certification.
What do weak or fake forklift claims look like?
- An "OSHA forklift license." The standard puts certification on the employer and creates no OSHA-issued operator license, so the wording describes something the rule does not contain. Ask who trained and evaluated the candidate, and when.
- Online only. A course with no practical training or workplace evaluation cannot meet 1910.178(l)(2)(ii) by itself.
- No dates or no trainer named. The record cannot be checked, and it lacks items the rule requires.
- An old evaluation more than three years back, or experience only on a different truck type.
- A candidate under 18 for any role that involves operating the truck.
Treat these as gaps to close, not as proof of dishonesty. A former employer may have closed or may simply not answer your request. The fix is the same every time: train what is missing and evaluate. Apply the same rule to every candidate for the same role, and see the certification verification guide for vendor-issued credentials.
Who verifies when a staffing agency places the operator?
Both employers. OSHA's Temporary Worker Initiative Bulletin No. 7 on powered industrial truck training says the agency and the host "share responsibility," and that "generally, the staffing agency is responsible for generic powered industrial truck training and the host employer is in the best position to provide the necessary site-specific" training and evaluation. Its key lines for verification:
- "If the staffing agency supplies trained powered industrial truck operators, the host employer must still verify that training" and give site-specific training.
- "The host employer must also conduct a workplace evaluation of each operator supplied by the staffing agency."
- The agency may keep the training and evaluation records, but the host "must know where the training and evaluation records are located and they must be accessible to an OSHA compliance officer during an inspection."
- The contract can set out who does what, "however, neither employer may avoid its ultimate responsibilities under the OSH Act by requiring another party to perform them."
So the agency verifies the prior record and gives generic training, sends the record with the worker, and asks the client to confirm its site evaluation; the client evaluates before the first lift and signs its certification. Check your client contract for who keeps the records, rather than assuming. The forklift operator job description template shows how to state the truck types and the evaluation in the order.
How often should you re-verify?
At least every three years, when 1910.178(l)(4)(iii) requires a new evaluation, and whenever a refresher trigger in 1910.178(l)(4)(ii) occurs: unsafe operation, "an accident or near-miss incident," an evaluation showing unsafe operation, a different type of truck, or a workplace change that could affect safe operation. Keep each operator's next evaluation date in your HR or safety system so it does not depend on memory.
When does the FCRA apply?
If you call a former employer yourself to confirm training dates, that is generally not a consumer report. If a background screening company verifies employment or training history for you, the Fair Credit Reporting Act's disclosure, written authorization and adverse action steps apply; see the FCRA background check process for recruiters.
Copy-ready verification and certification record
Forklift (powered industrial truck) training verification
Candidate name: [name]
Age 18 or older confirmed: [yes]
Prior record received: [employer or training company], dated [date]
Training date: [date] Evaluation date: [date]
Trainer/evaluator named: [name] Truck types: [types]
Confirmed with source: [yes, by phone/email on ___ / no reply since ___ / source closed]
Evaluation within three years: [yes / no]
Truck types match this job: [yes / no: ___]
Our training and evaluation (29 CFR 1910.178(l)(6))
Operator name: [name]
Topics trained here: [site topics; truck topics not covered by prior record]
Date of training: [date]
Date of evaluation: [date], in our workplace on [truck type]
Trainer/evaluator: [name and role]
Next evaluation due by: [date, no later than three years]
Records kept by: [employer / staffing agency], location: [where]
Questions people ask
Is there a national forklift license I can look up?
No. OSHA's powered industrial truck standard, 29 CFR 1910.178(l)(6), makes certification the employer's job: the employer certifies that each operator has been trained and evaluated, with the operator's name, the training date, the evaluation date and the identity of the trainer or evaluator. There is no federal registry to search, so verification means checking that training record and then evaluating the operator at your own site.
Can I accept a forklift certification from a previous employer?
You can use it to avoid repeating training, but not to skip your own evaluation. Under 1910.178(l)(5), additional training in a topic is not required if the earlier training is appropriate to the truck and working conditions and the operator has been evaluated and found competent. OSHA's compliance directive says each employer an operator works for is responsible for ensuring the operator has been trained, so you still cover your site-specific topics and evaluate the operator in your workplace before they drive.
How often does a forklift operator need to be evaluated?
At least once every three years under 29 CFR 1910.178(l)(4)(iii), and refresher training with an evaluation is also required after unsafe operation, an accident or near miss, a poor evaluation, an assignment to a different type of truck, or a workplace change that could affect safe operation. Check the date of the last evaluation on any record a candidate brings.
Is an online forklift certification valid?
Not on its own. The OSHA standard requires a combination of formal instruction, practical training and an evaluation of the operator's performance in the workplace. An online course can cover the formal instruction, but the practical training and workplace evaluation have to happen on the truck, at the site, before the employee operates it except for training under direct supervision.
Who certifies forklift operators placed by a staffing agency?
Both employers share the duty. OSHA's Temporary Worker Initiative bulletin on powered industrial truck training says the staffing agency is generally responsible for generic training and the host employer for site-specific training and evaluation, and that a host receiving trained operators must still verify that training and conduct a workplace evaluation of each operator. The contract can divide the tasks, but neither employer can hand off its legal responsibility.