How to

How to verify a surgical technologist certification: NBSTSA's CST lookup, NCCT's TS-C and state rules

On this page
  1. Where do employers verify a surgical technologist's certification?
  2. How do you verify a surgical technologist, step by step?
  3. What do the CST and TS-C statuses mean?
  4. Which states regulate surgical technologists?
  5. Is primary source verification required for surgical technologists?
  6. What does a fake or lapsed surgical tech certification look like?
  7. How often should you re-verify, and when does the FCRA apply?
  8. What should staffing agencies placing surgical techs do?
  9. Copy-ready verification record
  10. Questions people ask

To verify a surgical technologist's certification, search the issuer's own lookup: NBSTSA's Credential Verification for the Certified Surgical Technologist (CST) and Certified Surgical First Assistant (CSFA), which needs the name and the certification number, or NCCT's Verify Certification page for the Tech in Surgery - Certified (TS-C), which needs the NCCT User ID and last name. Then check the job state's rule: Texas bars most licensed facilities from employing a surgical technologist without NBSTSA or NCCT certification, subject to listed exceptions, and Washington requires registration with its Department of Health. The step employers most often miss is the certification number: NBSTSA's search will not run without it, so collect it at the screen. Everything below is as of November 2026.

The questions that collect the credential, specialties and call schedule are in the surgical technologist screening questions, and the posting lines, including New York's rule, are in the surgical technologist job description template. This page is the verification step.

Not legal advice. NBSTSA's and NCCT's pages, Texas Health and Safety Code chapter 259, RCW 18.215, the Washington Department of Health's search page and the Joint Commission hospital requirements were read on their official sites in November 2026. Other states regulate surgical technologists in their own ways, and facilities and client contracts can require more.

Where do employers verify a surgical technologist's certification?

CredentialIssuerWhere to verifyWhat you need
CST, CSFANational Board of Surgical Technology and Surgical Assisting (NBSTSA)Credential Verification, linked from NBSTSA's employer pageFirst and/or last name and the certification number (both required); otherwise call 800-707-0057
TS-CNational Center for Competency Testing (NCCT)Verify CertificationThe NCCT User ID and last name
State registrationThe state, where it registers or licenses surgical technologistsFor example, Washington's Provider Credential SearchName or credential number

How do you verify a surgical technologist, step by step?

  1. Collect at the screen: the credential (CST, CSFA or TS-C), the certification number or NCCT User ID, the name as certified, the expiration date the candidate expects, and every state registration or license held.
  2. Run the issuer's search yourself. For NBSTSA, enter the name and the certification number; for NCCT, the User ID and last name.
  3. Read the status and expiration, and download NBSTSA's credential verification letter from the result for your file.
  4. Check the state rule for the job's state (below), and run the state search where the state registers surgical technologists.
  5. If the issuer's search returns nothing, ask the candidate to confirm the number and the name on the certification, then call the issuer: NBSTSA at 800-707-0057, NCCT at 800-875-4404.
  6. Save each result with the date and who ran it, using the record at the end of this page.

What do the CST and TS-C statuses mean?

NBSTSA. NBSTSA's renewals and recertification page lists a two-year cycle for both credentials: 30 continuing education credits for the CST, at least 4 of them live, and 38 for the CSFA, at least 8 live, or renewal by retaking and passing the exam. Credits must be earned within the current cycle, and "Late Renewals: Must provide CE earned before expiration or retake the exam." Two practical points from the same page: certification "does not renew instantly," and "NBSTSA cannot email/fax employers but can confirm application receipt via phone." So a technologist who renewed last week may not show the new date yet; call NBSTSA to confirm the application was received, and search again later. NBSTSA is also moving continuing education records from AST to its own platform: beginning January 5, 2027, certificants enter credits and renew in their NBSTSA account, and the page says the expiration date does not change.

NCCT. NCCT's verify page defines the statuses it shows. Active: "a certificant must meet the annual recertification requirements." Inactive: those requirements were not met, and the certificant can return to active by completing the missed continuing education and fees. Invalid: inactive for five or more years, after which "the individual is no longer certified by NCCT" and must test again; a certification can also be invalid through revocation, and then "the individual's certification record may not appear." NCCT also lists Legacy and Non-renewal statuses. Only Active means a current TS-C.

Which states regulate surgical technologists?

Several do, in different ways, so read the job state's own statute or agency page. Two examples:

StateThe ruleWhat the employer checks
TexasA health care facility licensed by the Department of State Health Services, or owned or operated by the state, "may not employ a person to practice surgical technology" unless the person completed an accredited program and "holds and maintains certification" from NBSTSA, NCCT or another department-approved program. Exceptions: military surgical technology training, employment in a facility before September 1, 2009, federal service, new graduates for up to 180 days after graduation, and a documented shortage after "a diligent and thorough effort" with a written record kept at the facility (Health and Safety Code 259.002)The NBSTSA or NCCT result, or the documents behind the exception used; continuing education evidence on request, which the statute lets the facility ask for
Washington"No person may represent oneself as a surgical technologist by use of any title or description without being registered by the department" (RCW 18.215.020)The registration on the Department of Health's Provider Credential Search, which searches by credential number or name and offers a primary source verification letter

The Texas rule has a timing trap for new graduates: the facility may employ a graduate for 180 days, but the person "may not continue to practice surgical technology after the 180th day after the date of graduation" without documentation of the required certification. Put the 180th day in your tracking system on the day you hire. The statute also requires certified technologists to complete the continuing education their certifying body requires, and those employed under an exception to complete 30 hours every two years.

Is primary source verification required for surgical technologists?

In hospitals it usually is where the state requires the credential. The Medicare conditions of participation require a hospital to "assure that personnel are licensed or meet other applicable standards that are required by State or local laws" (42 CFR 482.11(c)), and the Joint Commission's hospital requirements call for verifying staff credentials with the primary source "when licensure, certification, or registration is required by federal, state, or local law and regulation," at hire and when credentials are renewed (HR.11.01.03). Where the law does not require the credential, the same standard still asks the hospital to verify the credential it requires, without the primary source requirement. A search on the NBSTSA or NCCT site is the primary source in either case, and it costs nothing.

What does a fake or lapsed surgical tech certification look like?

  • A CST claimed by someone who cannot give a certification number, or whose number does not match the name.
  • An expiration date in the past on the NBSTSA result, or an NCCT status of inactive or invalid.
  • A program completion certificate presented as certification; finishing a program is not passing the exam.
  • A CSFA claimed for a first-assist role when the result shows only a CST; they are separate credentials.
  • A Texas facility hire past the 180th day after graduation with no certification on record.
  • A Washington candidate with no registration on the Department of Health search.

Renewals in process and name changes explain many mismatches, so ask, confirm with the issuer by phone if the record is not yet updated, and apply the same rule to every candidate at the same stage. If a document looks altered, report it to the issuer; the wider patterns are in candidate fraud in healthcare staffing, and identity checks are in the candidate identity verification checklist.

How often should you re-verify, and when does the FCRA apply?

At each expiration date: every two years for NBSTSA credentials and every year for NCCT, plus each state registration's renewal date and, in Texas, the 180-day graduate deadline. The expiration tracking guide shows one way to keep them apart. A search your own staff run on the issuer's site is generally not a consumer report; if a background screening company or credentials verification organization verifies it for you as part of a report, the Fair Credit Reporting Act applies, with disclosure, written authorization and adverse action notices. See the FCRA background check process for recruiters.

What should staffing agencies placing surgical techs do?

  • Verify before you submit, with the certification number, and attach nothing the client can mistake for verification, such as the candidate's own certificate copy.
  • Check your contract. Client contracts say who verifies, which credentials the facility accepts and whether the agency tracks renewals during the assignment; read yours rather than assuming.
  • Match the state. A traveler moving from a Washington assignment to a Texas facility needs a current certification for Texas, whatever Washington required.
  • Re-check at every extension that crosses an expiration date.

Copy-ready verification record

Surgical technologist verification record (example; adapt to your policy)
Candidate name (as certified):
Role: [ ] scrub (CST/TS-C)  [ ] first assist (CSFA)   Facility state: ____
NBSTSA - credential: [ ] CST  [ ] CSFA  Certification no.: ____  searched on ____
  Status/expiration shown: ________  Verification letter saved: [ ] yes
NCCT - TS-C  User ID: ____  searched on ____  Status: [ ] active [ ] inactive [ ] invalid
State rule - State: ____  Rule: ________
  Texas exception used, if any: [ ] none [ ] military [ ] pre-9/1/2009 [ ] new graduate (180th day: ____) [ ] shortage record
  Washington registration no.: ____  Status: ____  Expires: ____
Identity matched to the record by: ________
Checked by: ________   Date: ________   Next check due: ________

The submittal line, for example (an invented example): "CST, NBSTSA verification run 2026-11-16 with certification number, active through 2028-03; Washington surgical technologist registration active; checked by J. Park."

Questions people ask

How do I verify a surgical technologist's CST certification?

Use NBSTSA's online Credential Verification and enter the technologist's first and/or last name and their certification number; both are required. You can download a credential verification letter from the result. If you do not have the certification number, NBSTSA says to call it at 800-707-0057. Ask the candidate for the number at the screen so you can run the search yourself.

How do I verify a TS-C from NCCT?

Use NCCT's Verify Certification page with the candidate's NCCT User ID and last name. NCCT says the User ID is on the candidate's NCCT dashboard, original certificate and NCCT ID card. Read the status: active means the annual recertification requirements are met, inactive means they were not, and a certification inactive for five or more years becomes invalid.

How often does a CST have to be renewed?

Every two years, as of November 2026. NBSTSA's renewal page lists a two-year cycle with 30 continuing education credits for the CST, at least 4 of them live, or renewal by retaking and passing the exam. A late renewal must use credits earned before the expiration date or a retake of the exam, so re-verify at each expiration date.

Does Texas require surgical technologists to be certified?

For most facility jobs, yes. Texas Health and Safety Code section 259.002 bars a health care facility licensed by the state health department, or owned or operated by the state, from employing a person to practice surgical technology unless the person shows they completed an accredited program and hold certification from NBSTSA, NCCT or another program the department approves, with exceptions for military training, people employed before September 1, 2009, federal service, new graduates for 180 days, and documented shortages.

Do I need the candidate's consent to check a CST or TS-C?

A search your own staff run on the issuer's public lookup is generally not a consumer report. If a background screening company or credentials verification organization verifies the certification as part of a report, the Fair Credit Reporting Act applies, so you need the standalone disclosure and written authorization first, and the adverse action steps if the result counts against the candidate. This is not legal advice.