How to

How to verify an asbestos certification: AHERA accreditation certificates, annual refreshers, OSHA training and state licenses

On this page
  1. Who needs asbestos accreditation, and from whom?
  2. Where do you verify an asbestos certification?
  3. How do you verify an asbestos worker or supervisor, step by step?
  4. What training does each discipline need?
  5. What does OSHA require on construction jobs?
  6. How do state asbestos licenses work? Three examples
  7. What does a fake or lapsed asbestos credential look like?
  8. When does the FCRA apply?
  9. What should staffing agencies do?
  10. A copy-ready asbestos verification record
  11. Questions people ask

To verify an asbestos certification, start with the accreditation certificate: under EPA's Asbestos Model Accreditation Plan (40 CFR part 763, subpart E, appendix C) it carries a unique number, the discipline (worker, contractor/supervisor, inspector, management planner or project designer) and an expiration date "1 year after" the course, and whoever issued it must keep records "in a manner that allows verification by telephone." Confirm the number with that state or training provider, then check the state license where the state requires one, for example New York's Asbestos Individual Certificates dataset. There is no national lookup. What employers most often miss is the annual refresher: accreditation lapses every year unless the person completes a discipline-specific refresher. As of November 2026.

Not legal advice. Checked against 40 CFR part 763, subpart E, appendix C and 40 CFR 61.145 on the Cornell LII copy of the eCFR, OSHA's 29 CFR 1926.1101 on osha.gov, EPA's asbestos professionals and State Asbestos Contacts pages, and the New York, Texas and Washington agency pages, in November 2026. State programs often go further than the federal minimums described here.

Asbestos questions for insulation crews are in the insulation installer screening questions, and OSHA 10 and 30 cards are a separate check in how to verify an OSHA outreach card. This page covers asbestos accreditation and state asbestos licenses.

Who needs asbestos accreditation, and from whom?

EPA's asbestos professionals page says the Model Accreditation Plan, issued under the Asbestos Hazard Emergency Response Act of 1986 (AHERA), "requires the use of trained and accredited asbestos professionals when conducting asbestos inspections or designing or conducting response actions at schools and public and commercial buildings." The Asbestos School Hazard Abatement Reauthorization Act of 1990 (ASHARA) increased the training hours. States run accreditation: "Some states agencies directly issue accreditation certificates. Others authorize training providers to" issue them, and where a state offers no training, a person completes an EPA-approved course or one approved by another state with an EPA-approved program.

On construction sites, OSHA's training rules apply to the employer whatever the building type (next sections), and the Clean Air Act asbestos NESHAP adds an on-site trained representative for regulated demolition and renovation.

Where do you verify an asbestos certification?

CheckWhereNotes (as of November 2026)
Accreditation certificateThe certificate itself, which "Accredited persons must have" with their initial certificate "at the location where they are conducting work"Read the discipline, course dates, exam date and expiration
Confirm the certificate numberThe issuing state agency or training provider named on itThe plan requires records of names, certificate numbers, disciplines, training and expiration dates, kept at least 3 years and verifiable by telephone
Which state agency to callEPA's State Asbestos Contacts (updated October 1, 2026)Lists AHERA and NESHAP contacts by state
New York certificatesAsbestos Individual Certificates: Two Year Window on data.ny.govPosted daily by the Department of Labor; certificate number, endorsement type, name, issued and expiration dates, status; expired more than two years ago drops off
Texas licensesDSHS Find a Licensee, which points to the Division for Regulatory Services Online License SystemDSHS says the online search "contains the most current licensing information"
Washington certificationsL&I Verify a Contractor, Tradesperson or BusinessCategories for Asbestos Worker, Asbestos Supervisor and Asbestos Contractor, plus a list of certified asbestos contractors

How do you verify an asbestos worker or supervisor, step by step?

  1. Ask for the initial and most recent refresher certificates and any state license card. A neutral line: "I confirm asbestos accreditation and state licenses before I submit anyone. Can you send your initial certificate, your latest refresher and your state license number?"
  2. Read the discipline. Worker, contractor/supervisor, inspector, management planner and project designer are separate accreditations; the plan calls each "separate and distinct from the others."
  3. Read the expiration date. If the latest refresher is more than a year old, the accreditation has lapsed under the federal model unless the state's grace rule says otherwise.
  4. Call the issuer named on the certificate (a state agency or approved training provider) and confirm the number, name, discipline and dates.
  5. Check the state license for the job's state on its own lookup; a certificate from another state may not be enough.
  6. Match the person to the certificate and license with photo ID at onboarding. The plan lets states issue their licenses as photo-identification cards.
  7. Record the check with the template below and calendar the refresher date.

What training does each discipline need?

DisciplineInitial course (federal minimum)Annual refresher
WorkerAt least 4 days, with at least 14 hours of hands-on training and respirator fit testingOne full day
Contractor/supervisorAt least 5 daysOne full day
InspectorAt least 3 daysOne half day
Management plannerThe 3-day inspector course plus a 2-day management planner courseOne half day of inspector refresher and one half day of management planner refresher
Project designerAt least 3 daysOne full day

Source: the Model Accreditation Plan, sections B and D. One day of training "equals 8 hours, including breaks and lunch," each discipline has its own closed-book exam, and "After completing the annual refresher course, persons shall have their accreditation extended for an additional year from the date of the refresher course." EPA also "determined that online training can satisfy" the refresher requirement if the accrediting state approves the online course. A sixth role, project monitor, has a recommended curriculum but is "not federally-accredited."

What does OSHA require on construction jobs?

29 CFR 1926.1101(k)(9) sets asbestos training by class of work, "conducted at no cost to the employee," before or at initial assignment "and at least annually thereafter":

  • Class I, and Class II using critical barriers or negative pressure enclosures: training "equivalent in curriculum, training method and length to the EPA Model Accreditation Plan (MAP) asbestos abatement workers training."
  • Other Class II work (for example roofing, flooring, siding, ceiling tiles or transite panels): at least 8 hours of training with hands-on practice, covering each category of material the employee removes.
  • Class III: at least 16 hours, consistent with EPA's training for school maintenance and custodial staff under 40 CFR 763.92(a)(2).
  • Class IV: at least 2 hours, consistent with 40 CFR 763.92(a)(1).

The competent person for Class I and II work must be trained in "a comprehensive course for supervisors that meets the criteria of EPA's Model Accreditation Plan" (1926.1101(o)(4)). And for regulated demolition and renovation, the asbestos NESHAP at 40 CFR 61.145(c)(8) requires at least one trained on-site representative, refresher training "Every 2 years," and evidence of that training "posted and made available for inspection" at the site. So a 2-hour awareness certificate is not an abatement credential, and the NESHAP representative's training is its own requirement with its own two-year refresher.

How do state asbestos licenses work? Three examples

  • New York: the Department of Labor's Asbestos Control Bureau enforces Industrial Code Rule 56 (12 NYCRR Part 56), which requires "Licensing of contractors" and "Certification of all persons working on asbestos projects." The data.ny.gov dataset covers individual certificates for handlers, supervisors, inspectors, air sampling, management planners, operations and maintenance, project designers, project monitors and restricted allied trades.
  • Texas: DSHS licenses individuals by type. Its requirements page lists, for a worker license, a $65 application fee, a photo, a physician's written statement signed within the last 12 months and the worker training certificate and training ID card; a supervisor license adds the department's exam and 90 days of qualifying experience within the last 24 months.
  • Washington: L&I certifies asbestos workers, supervisors and contractors and shows them in its Verify tool.

What does a fake or lapsed asbestos credential look like?

  • A refresher date more than a year old, or no refresher at all on a certificate several years old.
  • The wrong discipline: a worker certificate for a supervisor seat, or an inspector certificate offered for abatement work.
  • An awareness or operations-and-maintenance course presented as abatement accreditation.
  • A certificate from a provider without approval for that discipline. The plan lists that as grounds for deaccreditation, says a person who obtained accreditation through "fraudulent representation of training or examination documents" is not accredited, and says working without required accreditation violates TSCA.
  • An out-of-state certificate where the job's state requires its own license or certificate.
  • A name or number the issuer cannot confirm.

When something does not check out, keep the person off asbestos work, confirm with the issuer or state, and use the same check for every candidate. The plan also lets EPA and states deaccredit people for "Permitting the duplication or use of one's own accreditation certificate by another." See how to report candidate fraud for what to document.

When does the FCRA apply?

Calling a training provider or searching a state lookup yourself is your own check. If a background screening company verifies certifications for you, treat its report as a consumer report and follow the FCRA background check process for recruiters.

What should staffing agencies do?

  • Verify accreditation and the state license before you submit, with the discipline and the refresher due date.
  • Settle OSHA training and the competent person in writing. OSHA training is the employer's duty at no cost to the employee; agree with the host which employer provides class-specific and site training and who serves as competent person. See OSHA rules for temporary workers.
  • Check the contractor license of the client where the state licenses asbestos contractors; see how to verify a contractor license.
  • Track refreshers yearly and re-check at each extension.

A copy-ready asbestos verification record

ASBESTOS VERIFICATION RECORD (example; adapt to your policy)
Name:                               Job state:
Discipline: [worker / contractor-supervisor / inspector /
             management planner / project designer]
Initial certificate: no. [ ]  provider or state [ ]  date [ ]
Latest refresher: date [ ]  expires [ ]
Issuer confirmed by phone: [date, contact]
State license or certificate: [type, no., expires]
  Verified on: [state lookup]  Date: [ ]  By: [ ]
OSHA class of work on this job: [I / II / III / IV]
  Class-specific training provided by: [employer] on [date]
Competent person for the job: [name, supervisor course date]
NESHAP trained on-site representative (if regulated): [name, date]
Photo ID matched: [date, by]
Next check: [refresher due / assignment extension]

Lead-safe renovation is a separate credential; see how to verify an EPA lead-safe certification. Other trades are in how to verify a candidate's certifications. Not legal advice; checked as of November 2026.

Questions people ask

How do I verify an asbestos worker's certification?

Ask for the initial and current accreditation certificates, which the worker must have at the work location under EPA's Model Accreditation Plan, check the discipline and the expiration date, and confirm the certificate number with the state or training provider that issued it; the plan requires them to keep records that allow verification by telephone. Then check the state license or certificate where the state requires one, for example on New York's Asbestos Individual Certificates dataset, Texas DSHS's online license search or Washington L&I's Verify tool, as of November 2026.

How long is an AHERA asbestos accreditation valid?

One year. Under 40 CFR part 763, subpart E, appendix C, an accreditation certificate shows an expiration date of one year after the course and examination, and each annual refresher extends accreditation for another year from the refresher date. EPA recommends that states allow a 12-month grace period for refresher training before the initial course must be retaken, but the state's own rule decides.

Is there a national asbestos certification lookup?

No. EPA's asbestos professionals page says some states issue accreditation certificates directly and others authorize training providers to issue them, and it sends people to the state agency for state requirements and approved courses. EPA's State Asbestos Contacts page lists the agency for each state, and several states, including New York, Texas and Washington, publish their own lookups.

What asbestos training does OSHA require for construction workers?

Under 29 CFR 1926.1101(k)(9), training for Class I work, and for Class II work that uses critical barriers or negative pressure enclosures, must be equivalent to EPA's Model Accreditation Plan worker course; other Class II work needs at least 8 hours with hands-on training, Class III at least 16 hours and Class IV at least 2 hours. Training must be given before or at initial assignment, at least annually after that, and at no cost to the employee.

Does an asbestos supervisor need different training from a worker?

Yes. EPA's Model Accreditation Plan sets a 5-day course for contractor/supervisors and a 4-day course for workers, each with an annual refresher. OSHA's construction standard also requires the competent person for Class I and II work to be trained in a course for supervisors that meets the plan's criteria, under 29 CFR 1926.1101(o)(4).