How to

How to verify an RBT certification: the BACB registry, supervisor on record and inactive status

On this page
  1. Where do you verify an RBT?
  2. How do you verify an RBT, step by step?
  3. What do the RBT statuses mean?
  4. Who can be the RBT's supervisor on record?
  5. How often do RBTs renew, and what changed in 2026?
  6. Do states credential behavior technicians too?
  7. What does a fake or lapsed RBT credential look like?
  8. When does the FCRA apply, and what should staffing agencies do?
  9. Copy-ready verification record
  10. Questions people ask

To verify a Registered Behavior Technician, search the BACB Certificant Registry by name or RBT certification number and read two things: the status, and the RBT Supervisor or RBT Requirements Coordinator on record. The Behavior Analyst Certification Board's RBT Handbook says the registry "will show your RBT Supervisor/RBT Requirements Coordinator and the status of your certification," and an RBT without a supervisor on record, or inactive for any other reason, is marked "with red text stating that you may not practice." The point employers most often miss is that RBT status depends on supervision: a new RBT starts inactive, and an RBT you hire from another organization is active for your clients only once your own supervising BCBA or BCaBA adds them in the BACB portal. Facts here are as of November 2026.

The registry and the BACB's verification letter work the same way for BCBAs; the differences for analysts, state licenses and supervisors are in how to verify a BCBA certification. Screening questions on the RBT credential and supervision are in the behavior technician screening questions.

Not legal advice. The RBT Handbook (updated October 2026), the registry, verification and terms of use pages on bacb.com, and the Washington and Nevada board pages were read in November 2026. Medicaid programs, payers and client contracts can require more than this page describes.

Where do you verify an RBT?

CheckWhereWhat it showsSource
RBT certification and supervisorBACB Certificant Registry (free)Status, current RBT Supervisor or Requirements Coordinator, and a † for published disciplinary actionsBACB verify certification; RBT Handbook
Written verificationBACB verification letter request form"all the information shown on the BACB Certificant Registry"; $25, emailed as a PDFRBT Handbook
Certificate letter from the RBTThe RBT's email from the BACBCertification number and expiration dateRBT Handbook: "RBTs do not receive a physical copy of a certificate"
State technician credential, where one existsThe state board's lookupState registration or certification statusFor example, Washington and Nevada below

How do you verify an RBT, step by step?

  1. Ask for the RBT certification number (it starts with RBT, then a two-digit year and a sequence number on the registry's search form) and the name exactly as on the BACB account.
  2. Search the registry after agreeing to the BACB's terms of use, with certification type RBT.
  3. Read the status. Active means the RBT may practice under supervision; inactive or expired means they may not. Read any red text and any reason given.
  4. Read the supervisor on record. For a candidate still working elsewhere, it will usually be the current employer's supervisor or Requirements Coordinator. That is expected; it is not a reason for doubt.
  5. Look for a dagger (†), which marks published BACB sanctions or actions; expand the row to read them.
  6. Check any state technician credential the job's state issues.
  7. After hire, have your supervisor add the RBT as a supervisee in their BACB portal account, then search the registry again and confirm your supervisor or coordinator now appears and the status is active.
  8. Record both checks, before and after the supervisor change, using the template below.

What do the RBT statuses mean?

The RBT Handbook's inactive policy says RBTs "may be inactive because they" placed the certification on voluntary inactive or active duty/reserve status, "do not have a qualified RBT Supervisor or RBT Requirements Coordinator on record with the BACB," did not recertify and are in their reinstatement period, or "have sanctions against their certification."

Registry statusWhat the RBT Handbook saysMay they deliver services?
Active, supervisor shownPracticing "under the direction and close supervision" of the supervisor or coordinator on recordYes, under that supervision
Inactive, "No Supervisor/Coordinator on Record"Listed as inactive with that reason; to reactivate, an RBT Supervisor or Requirements Coordinator must add the RBT as a supervisee; "not the same as Voluntary Inactive Status"No
Inactive after passing the exam"your RBT certification status will begin as inactive" until a supervisor adds the RBTNo
Inactive, voluntaryUp to two years without recertification applicationsNo
Inactive, reinstatement period30 days from the expiration date to submit an approvable application and pay a late feeNo
ExpiredNot recertified by the end of the reinstatement period; the person must meet current eligibility, reapply and retake the examNo

The supervision rules behind that first row are summarized in the behavior technician job description template: supervision for at least 5% of service hours each calendar month, with two face-to-face, real-time contacts. Two handbook details matter for employers. An RBT who works for two organizations must meet the supervision requirements "independently at each organization." And the RBT and the supervisor must keep supervision documentation "for at least 7 years," even after the supervisory relationship ends; the BACB "reserves the right to audit current and former RBTs, RBT Supervisors, or RBT Requirements Coordinators at any time."

Who can be the RBT's supervisor on record?

The RBT Handbook's supervisor table lists BCBA or BCaBA certification for an RBT Supervisor and BCBA certification for an RBT Requirements Coordinator, and says that before supervising, both "must have completed a training based on the Supervisor Training Curriculum Outline (2.0)" and uploaded it to their BACB portal account. The RBT "may not be related to, superior to, an employer of, or in a multiple relationship with" the supervisor or coordinator. Without a Requirements Coordinator, every RBT Supervisor must list the RBT as a supervisee; with one, only the coordinator must. Verify your own supervisor's BCBA or BCaBA status the same way before you rely on them.

How often do RBTs renew, and what changed in 2026?

RBT certification used to renew every year, with an expiration date "typically on the one-year anniversary of the date you passed the examination." The RBT Handbook now says RBTs who recertify on or after January 1, 2026 meet the then-current requirements, including the Recertification Competency Assessment, "one last time before their 2-year recertification cycle begins," and that later renewals follow the 2026 maintenance requirements, including 12 hours of professional development in each two-year cycle. During the changeover you will see RBTs on both cycles, so read the expiration date on the registry instead of assuming one.

The eligibility rules also tell you what the credential does and does not prove. Applicants must be at least 18, have at least a high school education, complete a 40-hour training and an initial competency assessment, and pass "a criminal background check and an abuse registry check" no more than 180 days before paying for the application, confirmed by an attesting certificant. The handbook adds that "fingerprinting is not required by the BACB, but this requirement may vary by state and organization." The BACB check does not replace the checks your state, payer or client requires.

Do states credential behavior technicians too?

Some do, in addition to the BACB credential. Two examples:

For any other state, check the board named on the BACB's US licensure page and ask it whether technicians need a state credential.

What does a fake or lapsed RBT credential look like?

  • A paper or framed "RBT certificate." The BACB says RBTs do not receive a physical certificate; they get an emailed letter with the certification number and expiration date.
  • A 40-hour training certificate offered as proof of certification. Training is an eligibility step; the exam, the application and an active registry status come after it.
  • No registry record, or a record that shows inactive or expired for a credential the resume lists as current.
  • A supervisor on record the candidate does not recognize, or a dagger they did not mention.
  • A name on the BACB's falsified credentials page, which also has a form to report alleged misrepresentation.

Pause, ask, re-check the registry and apply the same rule to every candidate at the same stage. If you conclude the credential was misrepresented, report it to the BACB and follow how to report candidate fraud. A registry match proves an RBT exists with that name and number, not that the person you interviewed is that RBT, so match it to government ID at onboarding.

When does the FCRA apply, and what should staffing agencies do?

A search you run yourself on the BACB registry is generally not a consumer report. If a background screening company verifies the credential or runs the criminal and abuse registry checks, the Fair Credit Reporting Act applies: the standalone disclosure and written authorization first, and the pre-adverse and adverse action notices if a result counts against the candidate (see the FCRA background check process). For staffing agencies placing RBTs with ABA providers:

  • Agree who supervises before day one. On supervisor-client oversight, the handbook says "the two parties should be employed by the same organization, or they should have a contractual relationship with your client(s)," so settle which BCBA or BCaBA will add the RBT in the BACB portal.
  • Check your contract for who verifies, how often and what proof the client needs.
  • Do not source from the registry. The BACB's terms of use bar commercial use and "solicitation for employment."
  • Run the exclusion check for clients that bill Medicaid; see the OIG exclusion list guide.

Copy-ready verification record

RBT verification record (example; adapt to your policy)
Candidate (name as on the BACB registry): [name]
RBT certification number: [RBT-..]
Pre-hire registry check: status [active / inactive (reason) / expired / not found]
  Supervisor or coordinator on record: [name, organization]   Dagger: [no / yes, read]
  Expiration date shown: [ ]   Cycle: [annual / two-year]
State technician credential (if the state issues one): [state, type, status]
Post-hire registry check: our supervisor or coordinator shown [yes, name] status active [yes]
OIG LEIE and state Medicaid exclusion list: [date, result]
Checked by: [name], on [date]   Next check due: [date]
Third-party screener used (FCRA steps followed): [no / yes, vendor and date]

For the interview itself, the interview guide for behavioral health roles covers session notes, supervision and client safety questions.

Questions people ask

How do I verify an RBT certification?

Search the BACB Certificant Registry on bacb.com by name or by the RBT certification number. The RBT Handbook says the registry shows the RBT's current RBT Supervisor or RBT Requirements Coordinator and the status of the certification, and that an RBT with no supervisor on record, or inactive for any other reason, is flagged in red text stating that they may not practice. A $25 emailed verification letter is available if you need written proof, as of November 2026.

Why does a newly certified RBT show as inactive?

Because every new RBT certification starts inactive. The RBT Handbook says the status changes to active only when the RBT's qualified RBT Supervisor or RBT Requirements Coordinator adds them as a supervisee in their BACB portal account, and that an inactive RBT cannot use the certification under any circumstances. If you hire a newly certified RBT, your supervising BCBA or BCaBA has to add them before they deliver services.

Can an RBT work without a supervisor on record?

No. Under the RBT Handbook, an RBT may only practice with an RBT Supervisor or RBT Requirements Coordinator on record with the BACB and shown on the registry. Without one, the RBT is listed as inactive with No Supervisor/Coordinator on Record as the reason and may not practice, bill or represent themselves as an active RBT until a supervisor adds them.

How often do RBTs renew their certification?

RBTs used to recertify every year. The RBT Handbook, updated October 2026, says RBTs who recertify on or after January 1, 2026 meet the current requirements, including the Recertification Competency Assessment, one last time before a two-year cycle begins, and that the 2026 requirements include 12 hours of professional development in each two-year cycle. Read the expiration date on the registry rather than assuming a cycle.

Does the BACB background check replace the employer's background check?

No. To apply, an RBT must pass a criminal background check and an abuse registry check no more than 180 days before paying for the application, confirmed by an attesting certificant, but the BACB says fingerprinting is not required by the BACB and that this may vary by state and organization. Your own state, payer and client rules still decide which checks you run, and the FCRA applies when a screening company runs them.