Consent and compliance

New hire reporting for multistate employers (2026): register with HHS, pick one state and what changes

On this page
  1. What counts as a multistate employer for new hire reporting?
  2. How do you register as a multistate employer?
  3. Do you also have to notify the states?
  4. How do you choose the state to report to?
  5. What changes after you register, and what does not?
  6. How do you update, switch or cancel a registration?
  7. Can a payroll provider or PEO use the option for its clients?
  8. A worked example
  9. Multistate new hire reporting checklist
  10. Questions people ask

An employer with employees in two or more states can report each new hire to the state where that person works, or it can register with the U.S. Department of Health and Human Services (HHS) as a multistate employer and send every new hire report, electronically, to one state where it has employees, under 42 U.S.C. 653a(b)(1)(B). As of November 2026 you register online in the federal Multistate Employer Registry or by emailing the paper form to [email protected], and from then on you follow the chosen state's deadline, data fields and contractor rules and transmit at most twice a month, 12 to 16 days apart. The option changes only where new hire reports go; Form I-9, E-Verify and each state's payroll registrations stay exactly where they were.

Not legal advice. Checked in November 2026 against 42 U.S.C. 653a, the federal Office of Child Support Enforcement's new hire reporting page for employers (updated September 23, 2026), the Multistate Employer Registration Form (OMB 0970-0166, expiring August 31, 2028), and the state statutes and new hire sites linked below. For each state's own deadline, see new hire reporting requirements by state.

What counts as a multistate employer for new hire reporting?

Maryland's Department of Human Services defines it in its new hire FAQ as "an employer with a workforce employed in two or more states and which transmits new hire reports magnetically or electronically." The federal office that runs the registry is the Office of Child Support Enforcement (OCSE) in HHS's Administration for Children and Families; it was briefly called the Office of Child Support Services until a December 19, 2025 Federal Register notice (90 FR 59525) restored the old name, so older guides use either.

You then have two choices, and only two:

  • Option A: report each new hire to the state where the person works, following each state's rules and deadline.
  • Option B: designate one state where you have employees, register that choice with HHS, and report everyone there.

You cannot mix them. Maryland's FAQ says a company may not send most reports to one central location while some local offices report to their own states, and may not designate more than one state; New Jersey's portal says "You may only report new hires using either Option 1 OR Option 2." Companies in one corporate family that share an FEIN must make a single decision and avoid duplicate reports, the same FAQ adds.

How do you register as a multistate employer?

  1. Choose the reporting state. You must have at least one employee working there (form item 5). The next section covers how to choose.
  2. Register online or by form. Online, create an employer account on the Child Support Portal and open the Multistate Employer Registry. On paper, complete the form and email it to [email protected]. Either one meets the written notice that 653a(b)(1)(B) requires, the form says.
  3. Enter the company details: the FEIN without a hyphen, the legal name tied to it, the FEIN address (and whether income withholding orders should go there), and your name, work email and phone.
  4. List subsidiaries that use other FEINs on OCSE's Organization FEIN template, linked from the form, and submit it with the registration.
  5. Tick every other state or territory where you have at least one employee working now (item 6). You must select at least one besides the reporting state.
  6. Sign, then contact the chosen state for its electronic file layout and required fields. OCSE's page says it does not process new hire reports on the portal; the reports go to the state. Registration help: the Child Support Portal Help Desk, 1-800-258-2736, option 2 then option 4, weekdays 8:00 a.m. to 5:00 p.m. Eastern.

Some state sites still show a mailing address in Randallstown, Maryland and a fax number for multistate notifications. OCSE's current page, updated September 23, 2026, lists only the online registry and the emailed form, so use those.

Do you also have to notify the states?

Under federal law the notice goes to HHS. Maryland's FAQ goes further: a state may not require its own notification, because OCSE "sends a monthly list" of registered multistate employers to each state directory. But a few state statutes still say otherwise, as of November 2026:

  • Connecticut: C.G.S. § 31-254(c)(2) excuses reporting to Connecticut only if the employer "has notified the Labor Commissioner, in writing" of the state it designated.
  • Nebraska: Neb. Rev. Stat. 48-2305 says a Nebraska employer using the option "shall notify the department in writing."
  • Virginia: Va. Code § 63.2-1946(E) says to "provide a copy of that notification to the Virginia New Hire Reporting Center."

If any of these states is in your footprint, a short letter enclosing your HHS registration costs little and settles the question. See our Connecticut, Nebraska and Virginia pages for where to send it.

How do you choose the state to report to?

Once registered, you are "only required to follow the new hire regulations of the state you have chosen," as New Jersey's and Florida's new hire sites put it. That makes the choice a real decision, not paperwork:

FactorWhy it mattersExample (as of November 2026)Source
DeadlineThe chosen state's time limit applies to every hire you report thereMaine's statute says within 7 days; Iowa's says 15 days, or electronic transmissions 12 to 16 days apart19-A M.R.S. § 2154(4); Iowa Code 252G.3
Contractor reportingIf the chosen state requires contractor reports, you send them for every stateNew Hampshire: include contractors who meet its rule "whether or not the work is performed in New Hampshire"NHES 0083; Maryland FAQ
Extra data fieldsEvery report must carry the chosen state's fieldsIndiana: job title, SOC code, starting pay and pay rate; Iowa: date of birth and dependent health coverage; New York: dependent health insuranceIndiana center; Iowa Code 252G.3(2); NY Tax
Whose FEIN (PEOs)A PEO reporting for clients follows the chosen state's FEIN ruleSouth Dakota requires the client's FEIN even if your own state allows the PEO'sSD Department of Labor
Fraud cross-matchingThe work state may not see the hire quicklyTexas asks multistate employers to choose Texas, the "only way" its workforce agency gets the data; Utah "strongly encourages" reporting Utah workers to UtahTexas OAG; Utah DWS

The last row is the trade-off Maryland names directly: with one reporting state, "the information may not be available to the employee's work state" for unemployment and workers' compensation fraud checks. A practical way to decide is to start with the state where you hire most often, then test its deadline, fields, contractor rule and FEIN rule against the rest of your footprint before you register.

What changes after you register, and what does not?

  • Electronic only. Reports to the chosen state go electronically or by magnetic media, no more than twice a month and 12 to 16 days apart, per OCSE. Pennsylvania's PA CareerLink page says only employers that do not employ across multiple states may report by mail or fax.
  • State of hire on every record. Pennsylvania says multistate employers "MUST include" the employee's state of hire, and New Jersey asks you to flag that you report as a multistate employer.
  • Same FEIN as your quarterly wages. OCSE calls this "critical"; a mismatch can make you look non-compliant.
  • Rehire and contractor rules follow the chosen state, for example its definition of a rehire.
  • Unchanged: Form I-9 and its timing (I-9 timing), E-Verify where a state mandates it (E-Verify by state), unemployment and withholding registrations and wage reports in each state, and income withholding orders from any state's child support agency.

How do you update, switch or cancel a registration?

Use the same form or the portal. The form says that if your company "merges with or acquires another company or has other changes that may affect this reporting requirement," you send a revised form; online you choose "Update MSER." To stop, tick Cancel Registration and complete items 1 to 4 and 7, or choose "Deregister" on the portal, then go back to reporting each hire to its work state. If you switch reporting states, update the registration before your first transmission to the new state; Texas's rule, for one, asks for the HHS notice "prior to reporting" (1 Tex. Admin. Code § 55.305).

Can a payroll provider or PEO use the option for its clients?

Only client by client. OCSE says the option "is not available to multistate payroll service companies reporting on behalf of their customers unless those customers are multistate employers and have registered," and it is based on where each client has employees, never where the provider does. A provider may register its clients and may send several clients to one state only if they share it; OCSE's example of three clients in Connecticut, New York and Pennsylvania leaves New York as the only common state. Maryland adds that a provider must confirm each client is registered and has employees in the state it reports to. Staffing agencies and PEOs have more to check; see new hire reporting for staffing agencies and payrolling services explained.

A worked example

As an example (invented, not a real company): an employer has 300 employees in Pennsylvania, 40 in New Hampshire and 12 in Maine, and pays about 30 individual contractors a year in New Hampshire and Maine. If it registers Pennsylvania, which the federal matrix lists as not requiring contractor reports, it sends every employee report there with Pennsylvania's fields, and on Maryland's reading of the rule it no longer files contractor reports in New Hampshire or Maine. If it registered New Hampshire instead, it would report every contractor meeting New Hampshire's $2,500 rule, wherever they work; if it registered Maine, every hire would fall under Maine's 7-day rule. See which states require independent contractor reports. Either way, its Maine and New Hampshire hires still need Form I-9 on time and its payroll accounts in both states.

Multistate new hire reporting checklist

  1. List every state where you have at least one employee working today.
  2. Compare candidate reporting states on deadline, data fields, contractor rule and FEIN rule.
  3. Confirm you can transmit electronically in the chosen state's file format.
  4. Register in the Multistate Employer Registry, or email the form to [email protected], with subsidiaries listed.
  5. Send written notice to Connecticut, Nebraska or Virginia if they are in your footprint.
  6. Add the state of hire to every record and use the FEIN you file quarterly wages under.
  7. Update the registration after mergers, acquisitions, new states or a change of reporting state.
  8. Keep each transmission's confirmation, and recheck the chosen state's rules once a year.

Questions people ask

How do I register as a multistate employer for new hire reporting?

As of November 2026, you register with the U.S. Department of Health and Human Services, either online in the Multistate Employer Registry on the federal Child Support Portal or by emailing the Multistate Employer Registration Form (OMB 0970-0166) to [email protected]. You give your FEIN, legal name and address, a contact, the one state you will report to and every other state where you have employees. Registering is the written notice federal law requires. This is not legal advice.

Can a multistate employer report some new hires to one state and the rest to the states where they work?

No. The Maryland Department of Human Services' new hire FAQ says federal law allows either reporting every new hire to one designated state or reporting each new hire to the state where the person works, not a mix, and New Jersey's and Florida's new hire sites say the same. You also cannot designate more than one reporting state.

If I report all new hires to one state, whose rules do I follow?

The chosen state's. State new hire sites such as New Jersey's say a multistate employer that reports to one state only has to follow that state's new hire rules, and Maryland's FAQ gives the example of contractor reporting: if the chosen state does not require independent contractor reports, other states cannot make you send them, and if it does, you report contractors from every state. Form I-9, E-Verify and each state's tax registrations are not affected.

Do I have to tell each state that I chose a different state for new hire reports?

Federally, the written notice goes to HHS, and Maryland's FAQ says a state may not require its own notice because the federal office sends states a monthly list of registered multistate employers. Some state statutes still ask for it: Connecticut's says you must notify the Labor Commissioner in writing, Nebraska's says a Nebraska employer must notify the state department, and Virginia's says to send the Virginia New Hire Reporting Center a copy of the HHS notice.

Can a payroll company report all its clients' new hires to one state?

Only for clients that are registered multistate employers, and only to a state where each of those clients has employees. The federal office's example: if one client has workers in Connecticut, New York and Pennsylvania, another in New York and Pennsylvania, and a third in Connecticut and New York, New York is the only common state. The provider's own locations do not count, though a provider may register its clients.