For hiring managers

What is gross margin in staffing? The formula, what burden includes, and how it differs from markup

On this page
  1. How is gross margin calculated in staffing?
  2. What goes into burden?
  3. How is gross margin different from markup, spread and net margin?
  4. Why do agencies report permanent and contract margin separately?
  5. What gross margins do public staffing companies report?
  6. What lowers gross margin on a contract?
  7. How should a hiring manager or buyer read a supplier's margin?
  8. A gross margin worksheet you can copy
  9. Which gross margin mistakes cost agencies the most?
  10. Questions people ask

Gross margin in staffing is the share of revenue a staffing firm keeps after paying the direct cost of the worker it bills for. On temporary and contract work it is (bill rate − pay rate − burden) ÷ bill rate, where burden is the employer's payroll taxes, unemployment insurance, workers' compensation and any benefits; gross profit is the same amount in dollars. Gross margin is not markup: Staffing Industry Analysts' lexicon notes that the two are often confused, because gross margin is a percentage of the bill rate and markup a percentage of the worker's wage. Permanent placement fees carry almost no direct cost, so firms report them separately (as of November 2026).

This page defines the term for hiring managers, buyers and agency staff, shows what goes into burden, works through examples, and explains what moves the number. The deeper pricing method, building a bill rate from a target markup, is in how to calculate staffing markup.

How is gross margin calculated in staffing?

Staffing Industry Analysts' lexicon entry for gross margin describes it, for temporary staffing, as the difference between the bill rate and the direct costs of employment: pay rate plus burden or statutory costs and mandatory benefits. Per hour:

Gross profit per hour = Bill rate − Pay rate − Burden per hour
Gross margin %        = Gross profit per hour ÷ Bill rate
Markup %              = (Bill rate − Pay rate) ÷ Pay rate

A worked example (all rates invented; burden rates are examples, see the next section):

LinePer hour (example)
Bill rate$45.00
Pay rate$30.00
Employer FICA, 7.65% of pay$2.30
FUTA, 0.6% of the first $7,000, spread over a full year of 2,080 hours$0.02
State unemployment, example 3.0% of an example $9,000 wage base, over 2,080 hours$0.13
Workers' compensation, example 2.5% of pay$0.75
Burden$3.20
Gross profit$11.80
Gross margin ($11.80 ÷ $45.00)26.2%
Markup on pay ($15.00 ÷ $30.00)50.0%

If you know the markup and the burden as a share of pay, you can go straight to margin: gross margin = (markup − burden rate) ÷ (1 + markup). In the example, (0.50 − 0.107) ÷ 1.50 = 26.2%. The same formula shows the break-even point: when the markup only equals the burden rate, gross margin is zero.

What goes into burden?

Burden is everything the staffing firm pays because it is the worker's employer, on top of the wage. The lexicon lists workers' compensation, unemployment insurance, the employer's share of FICA, state or local taxes and hourly benefits. The federal parts are fixed by law; the rest depend on your state, insurer and benefits.

Burden itemThe ruleSource
Social Security (employer share)6.2% of wages up to the wage base, which is $184,500 for 2026IRS Topic no. 751, as of November 2026
Medicare (employer share)1.45% of all wages; no employer match for the 0.9% Additional Medicare TaxIRS Topic no. 751
Federal unemployment (FUTA)6.0% of the first $7,000 of each employee's wages; a credit of up to 5.4% for state unemployment tax brings it to 0.6%; less credit in credit reduction statesIRS Topic no. 759, as of November 2026
State unemployment insuranceRate and wage base set by each state and your experience ratingYour state workforce agency
Workers' compensationPremium set by job classification and claims historyYour insurer or state fund
Benefits and required leaveWhatever you provide or a state or city requires, per hour workedYour plans and local law

Two details change the per-hour figure. FUTA and state unemployment stop once each worker passes the wage base, so on a short assignment the same tax is spread over fewer hours: in the example, a 13-week assignment of 520 hours would carry about $0.08 of FUTA and $0.52 of state unemployment an hour, not $0.02 and $0.13. And workers' compensation is priced by job classification, so a warehouse role and an office role on the same desk can carry very different rates; one blended burden rate across a desk hides that.

How is gross margin different from markup, spread and net margin?

TermWhat it measuresDivided byIn the example
SpreadBill rate minus pay rate, before burdenNothing; a dollar figure$15.00
MarkupThe spread as a share of the wagePay rate50.0%
Gross profitSpread minus burdenNothing; a dollar figure$11.80
Gross marginGross profit as a share of revenueBill rate26.2%
Net margin or EBITDA marginWhat is left after recruiters' pay, rent, software and other overheadRevenueNot shown; depends on the whole firm

The lexicon adds that some firms, particularly in the UK, use "net fee income" (NFI) or "net disposable revenue" for the same idea. Whatever your firm calls it, write the definition down: whether burden is in or out decides whether a 26% and a 33% are the same deal described two ways.

Why do agencies report permanent and contract margin separately?

A direct-hire fee has no worker payroll behind it. Robert Half's annual report for 2025 (Form 10-K, filed with the SEC) defines gross margin for permanent placement as revenues less reimbursable expenses and shows it at 99.8% of revenue, while gross margin for contract talent solutions is revenues less costs of services, "which consist of payroll, payroll taxes and benefit costs for engagement professionals, and reimbursable expenses." Mixing the two makes a firm with more direct-hire business look like a better contract operator than it is. The lexicon says the same: strip out direct-hire fees before comparing temporary staffing margins. Conversion fees sit in between; see temp-to-perm conversion fees.

What gross margins do public staffing companies report?

Public filings are the only reliable published figures, and they are company-wide averages for one year, driven by each firm's mix. They are not targets for a desk.

Company and periodReported figureWhat cost of services includesSource
Robert Half, contract talent solutions, 202539.0% of revenues (39.2% in 2024)Payroll, payroll taxes and benefit costs for engagement professionals, and reimbursable expenses2025 Form 10-K
Robert Half, permanent placement, 202599.8% of revenuesReimbursable expenses onlySame filing
TrueBlue, whole company, fiscal year ended December 28, 2025Gross profit 22.8% of revenue (25.9% in 2024)Primarily wages, payroll taxes, benefits and workers' compensation expensesFiscal 2025 Form 10-K

TrueBlue's filing attributes its decline mainly to a shift in revenue mix toward its lower-margin staffing businesses. The lexicon makes the general point: temporary staffing margins vary by country and staffing category depending on the perceived value of the service.

What lowers gross margin on a contract?

  • Program fees. In a supplier-funded VMS or MSP program the fee comes out of your invoice. With an example 2% fee on the $45.00 bill rate you receive $44.10, gross profit falls to $10.90 and margin on what you receive is 24.7%. See VMS fees for staffing agencies.
  • Overtime billed below what you pay. If you pay time and a half ($45.00 in the example) but the client agreement bills overtime at straight time ($45.00), every overtime hour loses money once burden is added. Read the overtime clause before the first timesheet.
  • Pay raises without a bill rate change. A minimum wage increase or a retention raise comes straight out of gross profit unless the agreement allows a pass-through; see the bill rate increase letter.
  • Burden changes. A higher state unemployment rate after claims, a FUTA credit reduction, or a workers' compensation reclassification all raise cost per hour on rates already agreed.
  • Unbilled hours. Paid orientation, safety training or travel the client does not pay for.
  • Payrolling. Workers the client found and sends to you to employ carry a much lower markup; see payrolling services explained.

How should a hiring manager or buyer read a supplier's margin?

From the client's side, a bill rate is pay plus burden plus the supplier's gross margin, and only the last part is negotiable without hurting the worker. Many buyers therefore control price through a markup cap rather than margin. Massachusetts' statewide temporary help contract (PRF85 contract user guide, as of November 2026) bases the bill rate on "a maximum mark-up (36.5%) of the hourly pay rate" and defines markup as "the fee charged over and above the hourly wage paid to the temporary help worker." Using the example burden of about 10.7% of pay, a 36.5% markup leaves a gross margin of about 18.9% of the bill rate before any program fee. Two practical points for buyers:

  • Ask suppliers to quote pay rate and markup separately, so you can see whether a low bill rate comes from a thin margin or a low wage that will cost you in turnover.
  • Expect the markup to differ by job. Burden alone, mainly workers' compensation, differs between an office role and a forklift role, so one markup for every job either overprices the first or underprices the second.

A gross margin worksheet you can copy

Client / requisition:        [name / VMS req ID]
Bill rate (regular):         [$]      Program fee %: [ ]   Net rate: [$]
Pay rate:                    [$]
Burden per hour
  FICA (employer)            7.65% x pay           = [$]
  FUTA                       0.6% x first $7,000 ÷ expected hours on assignment = [$]
  State unemployment         [rate] x [wage base] ÷ expected hours = [$]
  Workers' comp              [class rate] x pay    = [$]
  Benefits / required leave  [$ per hour]
  Total burden               [$]
Gross profit per hour        Net rate − pay − burden = [$]
Gross margin                 Gross profit ÷ net rate = [%]
Overtime check               OT bill rate − (1.5 x pay) − OT burden = [$] (must be positive)
Approved by / date           [ ]

Federal rates in the worksheet are current as of November 2026; confirm your state unemployment rate, wage base and workers' compensation rate each year. For recording the result by desk and client, see recruiting agency metrics.

Which gross margin mistakes cost agencies the most?

MistakeWhat it causesFix
Quoting a markup as if it were a marginA deal priced at half the profit you expectedSay which one you mean, and convert with the formula above
One burden rate for every jobUnderpriced high-risk rolesBurden by workers' compensation class and state
Spreading capped taxes over a full year on short assignmentsReal cost per hour understatedUse expected hours on the assignment
Calculating on the rate card instead of the net rateProgram fees hidden in gross profitMargin on what you receive
Mixing direct-hire fees into contract marginA contract desk that looks healthier than it isReport permanent and contract separately

Gross margin is a pricing number, but it starts at intake: the pay rate a role really needs, the shift and overtime pattern and the workers' compensation class all come from the job order. Getting those right before the first submittal is cheaper than renegotiating a bill rate after the worker starts.

Questions people ask

How do you calculate gross margin for a staffing agency?

For temporary or contract work, subtract the worker's pay rate and the employer's burden (employer payroll taxes, unemployment insurance, workers' compensation and any benefits) from the bill rate, then divide by the bill rate. For example, a $45.00 bill rate, a $30.00 pay rate and $3.20 of burden leave $11.80 of gross profit an hour, a 26.2% gross margin. Those figures are an example, not a benchmark.

What is a good gross margin for a staffing agency?

There is no official benchmark, because margin depends on the mix of skills, clients, program fees and states. Public companies show the spread: Robert Half reported a 39.0% gross margin on contract talent solutions for 2025 in its annual report, while TrueBlue reported gross profit of 22.8% of revenue for fiscal 2025 and attributed its decline mainly to a shift toward its lower-margin staffing businesses. Set your own target from your burden, overhead and payment terms instead of copying either figure.

Is gross margin the same as markup in staffing?

No. Staffing Industry Analysts' lexicon says gross margin is a percentage of the bill rate, while markup is a percentage of the temporary worker's hourly wage, and the two are often confused. A 50% markup on a $30 pay rate gives a $45 bill rate, but after burden the gross margin on that bill rate is closer to a quarter than a half.

Why is the gross margin on permanent placements almost 100%?

A direct-hire fee has no worker payroll behind it, so there is almost no direct cost to subtract. Robert Half's 2025 annual report defines permanent placement gross margin as revenues less reimbursable expenses and shows it at 99.8% of revenue, which is why analysts and agencies report permanent and contract gross margin separately.

Do VMS and MSP fees reduce a staffing agency's gross margin?

Yes, in a supplier-funded program. The fee is taken out of what the agency is paid, usually as a percentage of the bill rate, so it comes straight out of gross profit while pay and burden stay the same. Calculate margin on the net amount you actually receive, not on the rate card figure.