Negative dilute and positive dilute drug test results: what they mean and what employers may do (DOT and non-DOT, 2026)
On this page
- What does "dilute" mean on a drug test?
- What is a positive-dilute result, and can it be retested?
- What must a DOT employer do after a negative-dilute?
- Can a DOT applicant start work on a negative-dilute?
- What may non-DOT employers do with dilute results?
- What should recruiters tell candidates about dilute results?
- Dilute results at a glance: DOT and non-DOT
- Checklist for dilute results
- Questions people ask
A dilute drug test result means the urine had less creatinine and a lower specific gravity than expected for human urine: under DOT rules, creatinine of at least 2 but under 20 mg/dL and specific gravity above 1.0010 but below 1.0030. A positive-dilute is simply a verified positive and must not be retested because it was dilute. A negative-dilute is a negative: a DOT employer must recollect immediately under direct observation only when the Medical Review Officer (MRO) directs it (creatinine 2 to 5 mg/dL), and otherwise may accept the result or retest, if it applies the same rule to everyone and announced it in advance. Non-DOT employers set the rule in their written policy, as of November 2026.
This page covers dilute results only. For the other ways a result can go wrong (invalid, adulterated, substituted) and their consequences, see refusal to take a drug test; for the DOT program as a whole, DOT drug testing requirements.
Not legal advice. The rules below come from 49 CFR Part 40 on eCFR (up to date as of November 12, 2026), checked as of November 2026. They bind DOT-regulated tests; non-DOT programs follow them only by policy or contract, and state laws may set other conditions. Confirm your policy with counsel.
What does "dilute" mean on a drug test?
Part 40 defines a dilute specimen as urine "with creatinine and specific gravity values that are lower than expected for human urine" (40.3). Laboratories must run validity tests on every DOT urine specimen (40.86), and the cutoffs that separate dilute from substituted are in 40.88. Dilute is one of four validity outcomes, and only dilute is not a problem in itself:
| Laboratory finding | Criteria | What it means for the employer | Source |
|---|---|---|---|
| Dilute | Creatinine at least 2 mg/dL but less than 20 mg/dL, and specific gravity above 1.0010 but below 1.0030 | Reported with the drug result as negative-dilute or positive-dilute | 40.88(a); 40.197 |
| Substituted | Creatinine below 2 mg/dL with specific gravity at or below 1.0010 or at or above 1.0200, on initial and confirmatory tests | If the MRO verifies it, a refusal to test | 40.88(b); 40.191(b) |
| Adulterated | A substance that is not a normal part of urine, or a normal substance at an abnormal concentration (definition in 40.3) | If the MRO verifies it, a refusal to test | 40.191(b) |
| Invalid | The laboratory cannot establish a positive, negative, adulterated or substituted result (definition in 40.3) | Cancelled; with no acceptable medical explanation, an immediate recollection under direct observation | 40.159 |
Dilution is a urine concept: Part 40 defines a dilute specimen as a urine specimen (40.3), and oral fluid has its own validity rules (40.92). DOT oral fluid testing is not yet available in practice; see oral fluid drug testing for employers.
What is a positive-dilute result, and can it be retested?
A positive-dilute is a positive. The MRO verifies the drug result the usual way (including the interview and any medical explanation), checks the "dilute" box on Copy 2 of the CCF and tells the employer the specimen was dilute (40.155(a) and (b)). Under 40.197(a), the employer "simply treat[s] the test as a verified positive test" and must not direct another test because the specimen was dilute. Handle it as described in what to do when a candidate fails a pre-employment drug test.
What must a DOT employer do after a negative-dilute?
The MRO reports the result as negative and dilute and must explain your obligations and choices (40.155(c)). The laboratory gives the MRO the creatinine and specific gravity values (40.97), but the MRO may not pass quantitative values to you (40.163(g)), so what you hear is whether an observed recollection is required. Then:
- If the MRO directs an observed recollection, do it immediately. That happens when creatinine was 2 to 5 mg/dL; the new collection must be under direct observation (40.197(b)(1)).
- Otherwise you may, but need not, retest. When creatinine was above 5 mg/dL, you may direct one more test immediately. It must not be observed unless another rule calls for observation (40.197(b)(2)(i), referring to 40.67(b) and (c)).
- Treat everyone the same. You may not retest some people and not others, but you may set different rules by test type, "conduct retests in pre-employment situations, but not in random test situations," and you must tell employees your choice in advance (40.197(b)(2)(ii)).
- Give minimum notice. Send the person to the collection site with as little advance notice as possible (40.197(c)(1)).
- Use the new result. The retest, not the first test, is the result of record (40.197(c)(2)).
- Stop after one. If the retest is also negative-dilute, you may not order another test because it was dilute, unless the MRO directs an observed recollection under step 1 (40.197(c)(3) and (4)). If an observed recollection again comes back negative-dilute and the CCF shows it was observed, the MRO reports it as negative-dilute (40.155(d)).
- Declining the retest is a refusal. A candidate who declines a test you direct under 40.197(b) has refused to test (40.197(c)(5) and 40.191(a)(6)), with the consequences covered in refusal to take a drug test.
Can a DOT applicant start work on a negative-dilute?
The test must give you a verified negative before safety-sensitive work; for CDL drivers, see 49 CFR 382.301. A negative-dilute is a negative result. Two cases need care:
- If the MRO has directed an observed recollection, the recollection becomes the result of record, so wait for it before the applicant starts.
- If your announced policy is to retest pre-employment negative-dilutes, the retest is the result of record, so the same applies.
If neither applies, the negative-dilute stands as the negative. Plan start dates accordingly; the time each step takes is in how long pre-employment drug test results take.
What may non-DOT employers do with dilute results?
No federal rule governs dilute results in company tests. Part 40's approach is a common model, but your written policy decides, and the drug testing policy template gives the usual options (accept, or one immediate recollection; positive-dilute treated as positive). Whatever you choose:
- Write it down before testing. State laws that regulate testing often require the procedures to be in a written policy given to the person tested, for example Vermont (the policy must identify "the particular test procedures," 21 V.S.A. 514(2)) and Montana (the policy must describe the testing procedures, including how disputes over results are resolved, MCA 39-2-207(1)(i)).
- Apply it to everyone offered the same job. Inconsistent retesting is barred in DOT testing and is hard to defend in any program.
- Keep a positive-dilute a positive. Dilution does not make a detected drug go away.
- Do not decide on a screen. If your program uses instant cups, a dilute or non-negative screen is not a laboratory result; some states, such as Minnesota, bar withdrawing a contingent offer on an unconfirmed screening result (Minn. Stat. 181.953, subd. 11).
What should recruiters tell candidates about dilute results?
Only what the policy says, and in advance. DOT requires employers that retest negative-dilutes to tell employees beforehand (40.197(b)(2)(ii)), and the same courtesy avoids disputes in company programs. A short line for the testing instructions, labelled as an example:
Example (adapt to your policy): If the laboratory reports your specimen as dilute, the Medical Review Officer will tell us whether a new collection is needed. [We require one new collection for all pre-employment tests that come back negative-dilute.] You may be asked to go to the collection site with little notice. Declining a required new collection is treated as a refusal to test.
Do not tell candidates how much to drink, and do not discuss creatinine levels: you will not have them, and the conversation belongs to the MRO. The MRO's role is explained in Medical Review Officer for employers.
Dilute results at a glance: DOT and non-DOT
| Situation | DOT-regulated test | Non-DOT company test |
|---|---|---|
| Positive-dilute | Verified positive; no retest because dilute (40.197(a)) | Treat as positive under your policy |
| Negative-dilute, creatinine 2 to 5 mg/dL | Immediate recollection under direct observation when the MRO directs it (40.197(b)(1)) | Your policy; many follow the DOT model |
| Negative-dilute, creatinine above 5 mg/dL | Accept, or retest unobserved if your announced policy says so for that test type (40.197(b)(2)) | Accept, or retest once, the same way for everyone |
| Second negative-dilute | No further test because dilute, except an MRO-directed observed collection (40.197(c)) | Your policy should say the second result stands |
| Candidate declines the retest | Refusal to test (40.197(c)(5)) | Your policy; state law may require it to state the consequences of refusal |
Checklist for dilute results
- Decide and write down your negative-dilute rule for pre-employment tests (accept or retest once).
- Tell candidates the rule before testing.
- When the MRO calls about a dilute result, ask one question: is an immediate observed recollection required?
- Send the candidate with minimum notice, and use the new result as the result of record.
- Treat positive-dilutes as positives and never retest them for dilution.
- Keep dilute results with drug testing records, not in interview notes.
Questions people ask
Is a negative dilute drug test a fail?
No. A negative-dilute is a negative result whose urine was more watery than expected. In DOT testing the employer must order an immediate retest under direct observation only when the MRO says so, which happens when creatinine was 2 to 5 mg/dL; otherwise the employer may accept it or retest under a policy it applies to everyone, as of November 2026.
Can an employer make a candidate retake a drug test after a negative dilute result?
Yes, within limits. Under 49 CFR 40.197 a DOT employer may retest after a negative-dilute with creatinine above 5 mg/dL only if it treats all employees the same way for that test type and told them in advance, and the retest is not observed unless another rule allows it. Non-DOT employers set the rule in their written policy, subject to state law.
What happens with a positive dilute drug test?
It is treated exactly like a verified positive. Under 49 CFR 40.197(a), a DOT employer must not order another test because the specimen was dilute, and the usual consequences of a positive follow.
Does the employer see the creatinine level on a dilute result?
No. The laboratory gives the creatinine and specific gravity values to the Medical Review Officer, but under 49 CFR 40.163(g) the MRO must not give quantitative values to the employer. The MRO tells the employer whether an immediate observed recollection is required.