Consent and compliance

DOT alcohol testing for employers: when it applies, the breath test steps and the 0.02 and 0.04 thresholds (2026)

On this page
  1. When do DOT employers have to test for alcohol?
  2. Who does the test, and on what device?
  3. What happens during a DOT breath alcohol test, step by step?
  4. What do the 0.02 and 0.04 results mean?
  5. What counts as refusing an alcohol test?
  6. Which mistakes cancel an alcohol test?
  7. What should recruiters and staffing agencies know?
  8. How long are alcohol testing records kept?
  9. Questions people ask

DOT alcohol testing is a breath test (with saliva or breath screening devices allowed for the first step) done by a trained technician under 49 CFR Part 40 for employees in DOT safety-sensitive jobs. It is required for random, post-accident, reasonable suspicion, return-to-duty and follow-up testing, and optional before hire. A screening result of 0.02 or higher triggers a confirmation test on an evidential breath tester after a 15-minute wait. A confirmed 0.04 or higher is a violation; 0.02 to 0.039 is not a violation but takes the employee off duty for 24 hours under FMCSA's rule and for at least 8 hours under most others, as of November 2026.

Drug testing works differently (urine, a laboratory and a Medical Review Officer): see DOT drug testing requirements for employers. This page covers alcohol only.

Not legal advice. This summarizes 49 CFR Part 40 subparts J to N, FMCSA's Part 382 and the other DOT agency rules on eCFR, checked as of November 2026. Each agency's rule adds details; confirm your program with your agency, your service agents or counsel.

When do DOT employers have to test for alcohol?

The FMCSA rule for CDL drivers is the most common; other agencies follow the same pattern with some differences.

TestWhen it applies (FMCSA)RuleOther agencies
Pre-employmentOptional. If used: every covered hire, after a contingent offer, before the first safety-sensitive function382.301(d)Also optional for the FAA (120.217(a)) and FTA (655.42); PHMSA's list of alcohol tests does not include it (199.225)
RandomAt least 10% of average driver positions in 2026, only just before, during or just after safety-sensitive work382.30510% for the FAA, FRA and FTA in 2026; none for PHMSA or the Coast Guard (2026 rates)
Post-accidentA fatality; or a citation within 8 hours plus an injury treated away from the scene or a vehicle towed away. Record why if not done in 2 hours; stop trying at 8 hours382.303FAA and PHMSA test employees whose performance contributed or cannot be discounted, with the same 2 and 8 hour limits
Reasonable suspicionSpecific, contemporaneous observations of appearance, behavior, speech or body odor by a trained supervisor, who may not then conduct the test382.307Similar rules in each agency
Return-to-dutyAfter a violation, once the SAP reports successful compliance; must be below 0.0240.305(a)All agencies
Follow-upUnannounced tests on the SAP's plan, at least six in the first 12 months40.307(d)All agencies

If a reasonable suspicion alcohol test cannot be done, the driver still may not perform safety-sensitive functions until a test shows less than 0.02 or 24 hours have passed since the determination (382.307(e)(2)).

Who does the test, and on what device?

  • Trained technicians only. Screening test technicians (STTs) may do screening tests; breath alcohol technicians (BATs) may do screening and confirmation tests (40.211). Both need qualification training on the DOT model course (40.213). A BAT-qualified supervisor may not test his or her own employee unless no other technician is available and the agency rule allows it.
  • Approved devices only. Screening uses devices on ODAPC's lists of approved screening devices or evidential breath testers (EBTs); a screening device may never be used for confirmation (40.229).
  • Confirmation on an EBT with specific features. It must print the result, give each test a unique number, print the device name, serial number and time, distinguish alcohol from acetone at 0.02, run an air blank and allow external calibration checks (40.231), maintained under the manufacturer's quality assurance plan (40.233).
  • The Alcohol Testing Form (ATF). Every DOT alcohol test is documented on the DOT ATF in appendix I to Part 40, which employers may not modify except in narrow ways (40.225).

What happens during a DOT breath alcohol test, step by step?

  1. Identity and paperwork. The technician checks a photo ID issued by the employer or a government (no faxes or photocopies), explains the procedure, completes Step 1 of the ATF and has the employee complete and sign Step 2. Refusing to sign Step 2 is a refusal to test (40.241). If a drug test is also due, the alcohol test should come first where practicable.
  2. Screening test. A new sealed mouthpiece is opened in front of the employee, who blows steadily for at least six seconds; the technician shows the result (40.243).
  3. Below 0.02: done. The technician signs the ATF and sends the result to the designated employer representative (DER) confidentially (40.247(a)).
  4. 0.02 or higher: confirmation test. The employee waits at least 15 minutes after the screening test, observed, without eating, drinking, putting anything in the mouth or belching; the confirmation test should begin within 30 minutes of the screening test (40.251(a)). Starting after 30 minutes does not invalidate the test but may be a regulatory violation (40.251(g)).
  5. Air blank, then the confirmation breath sample. The EBT must read 0.00 on an air blank before the test; if a second air blank is above 0.00 the device is taken out of service. The employee and BAT read the unique test number, the employee blows for at least six seconds, and the BAT shows the printed result (40.253).
  6. Result straight to the employer. For 0.02 or higher the employee signs Step 4 of the ATF (declining is noted but is not a refusal), and the BAT notifies the DER immediately by a means that ensures receipt, never through a consortium or other service agent (40.255(a)). There is no Medical Review Officer step for alcohol.

What do the 0.02 and 0.04 results mean?

Below 0.02 is a negative result. At 0.04 or higher the employer must remove the employee from safety-sensitive functions immediately; at 0.02 to 0.039 it must remove the employee temporarily as its agency's rule provides, without waiting for the written report (40.23(c)).

Agency0.04 or greater0.02 to 0.039Source
FMCSAProhibited; violationOff until the next regularly scheduled duty period, not less than 24 hours after the test382.201, 382.505
FAAProhibited; violationOff until a test shows less than 0.02, or the next regularly scheduled duty period but not less than 8 hours14 CFR 120.37(b), 120.221(f)
FRAProhibited; violationOff until the next regularly scheduled duty period, not less than 8 hours; a positive Federal test but not a violation of 219.101219.101(a)(2) and (a)(4)
FTAProhibited; violationOff until a test shows less than 0.02, or the next regularly scheduled duty period but not less than 8 hours655.31(b), 655.35
PHMSAProhibited; violationOff until a retest shows less than 0.02, or the next regularly scheduled duty period but not less than 8 hours199.215, 199.237

Outside those temporary removals, DOT rules forbid action "under this part" based solely on a result below 0.04, although an employer with independent authority (its own policy) may act consistent with law (382.505(b)). The rules also limit drinking before duty: four hours for CDL drivers (382.207) and transit employees (655.33), and eight hours for flight crewmembers and flight attendants (120.37(d)).

A confirmed 0.04 or higher, like a refusal, is a DOT drug and alcohol regulation violation that starts the Substance Abuse Professional process (40.285(b)): see the SAP and return-to-duty process. For CDL drivers, the employer reports the result to the FMCSA Clearinghouse by the close of the third business day (382.705(b)(1)).

What counts as refusing an alcohol test?

Under 40.261, an employee refuses by failing to appear within a reasonable time after being directed to (except for a pre-employment test), leaving before the test is complete, failing to provide enough breath or saliva, skipping the required medical evaluation, refusing to sign the ATF certification, or failing to cooperate with any part of the process. Two pre-employment exceptions matter to recruiters: not showing up for a pre-employment test is not a refusal, and neither is leaving before the testing process begins. When someone cannot provide enough breath, the employer must send the employee within five days to a licensed physician, who decides whether a medical condition explains it; if not, it is a refusal (40.265(c)). A refusal carries the same consequences as a violation (40.261(b)). The drug-side rules are in refusal to take a drug test.

Which mistakes cancel an alcohol test?

Part 40 lists "fatal flaws" that cancel the test, which is then treated as if it never happened (40.267): a confirmation test before the 15-minute wait ends, no air blank or an air blank that is not 0.00, an EBT that does not print the result, a mismatch between the displayed and printed test number or result, an expired screening device, or a screening device read too early or too late. If the EBT later fails its external calibration check, every result of 0.02 or above since the last valid check is cancelled. A cancelled test is neither positive nor negative: it does not count toward the random rate, cannot be used where a result below 0.02 is needed (return-to-duty, follow-up), and is not a reason for a company test (40.273).

What should recruiters and staffing agencies know?

  • No alcohol test before the offer. The EEOC's preemployment guidance says tests of whether or how much alcohol a person has consumed are medical examinations with no statutory exemption, so they cannot be given to applicants before an offer; DOT's optional pre-employment alcohol test comes after a contingent offer for the same reason. See pre-employment medical exams and the ADA.
  • Check the last two years. The previous-employer inquiry covers alcohol results of 0.04 or higher and refusals (40.25(b)); for CDL drivers the Clearinghouse pre-employment query covers the FMCSA part.
  • Name the DER. Because alcohol results go straight from the BAT to the DER, an agency placing drivers must agree with the client who the DER is and who removes the driver from duty: see drug testing for staffing agencies.
  • Write it down. Put the alcohol rules (prohibited levels, pre-duty limits, consequences) in the policy and educational materials every covered employee gets; the drug testing policy template keeps DOT and company rules apart.

How long are alcohol testing records kept?

FMCSA employers keep alcohol results of 0.02 or greater, refusals and EBT calibration documentation for five years, collection process records for two years, and results below 0.02 for one year (382.401(b)). Records are confidential and go to third parties only with the employee's specific written consent or as Part 40 allows (40.321).

Questions people ask

What is the DOT alcohol limit for safety-sensitive employees?

A confirmed breath alcohol concentration of 0.04 or greater is a DOT violation: the employer must remove the employee from safety-sensitive work immediately, and the employee cannot return until the Substance Abuse Professional and return-to-duty process is complete (49 CFR 40.23(c) and 40.285). A result of 0.02 to 0.039 is not a violation but still requires temporary removal under each agency's rule, as of November 2026.

How long must a CDL driver stay off duty after a 0.02 alcohol test?

Under 49 CFR 382.505(a), a driver whose DOT alcohol test shows 0.02 or greater but less than 0.04 may not perform safety-sensitive functions until the start of the next regularly scheduled duty period, and not less than 24 hours after the test. The FAA, FTA and PHMSA rules use 8 hours instead, or allow return once a retest shows less than 0.02.

Do DOT employers have to do a pre-employment alcohol test?

No. FMCSA, FAA and FTA rules make pre-employment alcohol testing optional. An employer that chooses to do it must test every covered hire, only after a contingent offer of employment or transfer, and under Part 40 procedures (for FMCSA, 49 CFR 382.301(d)). The EEOC treats alcohol tests as medical examinations, which the ADA does not allow before an offer.

Why is there a 15-minute wait before the DOT alcohol confirmation test?

To prevent alcohol left in the mouth from producing an artificially high reading. Under 49 CFR 40.251, the confirmation test may not start until at least 15 minutes after the screening test, the employee is observed and told not to eat, drink, put anything in the mouth or belch, and the test should begin within 30 minutes of the screening test.

Does a Medical Review Officer review DOT alcohol test results?

No. Alcohol results go from the breath alcohol technician directly to the employer's designated employer representative, immediately and by a means that ensures receipt for any result of 0.02 or higher, and never through a consortium or other service agent (49 CFR 40.255(a)(5)). The Medical Review Officer reviews drug tests only.