How to

How to verify a LEED credential: the USGBC directory, active, inactive and expired status, and the LEED AP specialty

On this page
  1. Where do you verify a LEED credential?
  2. How do you verify a LEED credential, step by step?
  3. What do active, inactive and expired mean for a LEED credential?
  4. Which LEED credential is on the resume?
  5. Does the job or the project actually need a LEED credential?
  6. What does a fake or lapsed LEED claim look like?
  7. How often should you re-verify, and when does the FCRA apply?
  8. What should AEC staffing agencies and recruiters do?
  9. What should the verification record say?
  10. Questions people ask

To verify a LEED credential, search the person in USGBC's people directory, which can be filtered by LEED credential, and then confirm the status: LEED credentials are awarded by Green Business Certification Inc. (GBCI) under license from the U.S. Green Building Council, and GBCI's candidate handbook says that within 72 hours of the exam appointment the results are processed and the credential "is updated in the USGBC directory." The status is what employers most often miss. Since November 3, 2023, a credential is active, inactive or expired, and an expired one "is no longer valid" under GBCI's Credential Maintenance Program Guide, even if the holder once passed the exam. For a LEED AP, also check the specialty (BD+C, ID+C, O+M, Homes or ND) against the work. Everything below is as of November 2026.

This page covers the LEED professional credentials, which belong to a person. LEED certification of a building is a separate thing. A LEED credential is not a license: an architect or engineer still needs the state license (see how to verify an architect license and how to verify a PE license), and other IT and project credentials are in how to verify a candidate's certifications.

Not legal advice. Checked against USGBC's credentials, LEED Green Associate and LEED AP pages, the LEED Green Associate Candidate Handbook (updated September 2026), the LEED AP with Specialty Candidate Handbook (updated October 2026), GBCI's Credential Maintenance Program Guide (updated December 2025), GBCI's Disciplinary and Exam Appeals Policy, USGBC's brand guidelines for LEED credentials and the LEED v4.1 BD+C rating system, read in November 2026. Project specifications and owner contracts can require more than this page describes.

Where do you verify a LEED credential?

RouteWhat you needWhat it shows or doesSource
USGBC people directoryThe person's nameA searchable directory of people, filterable by LEED credential; within 72 hours of the exam appointment, a passed credential "is updated in the USGBC directory"usgbc.org/people; Green Associate Candidate Handbook
The candidate's certificateA PDF the candidate downloads with "Download certificate" in the "My credentials" section of their Credentials DashboardThe credential named on the certificate; the handbooks say "Hard copies are not available"LEED AP with Specialty Candidate Handbook
The candidate's credential statusThe status and reporting period shown in their Credentials DashboardActive, inactive or expired, and when the current two-year period endsCMP Guide
GBCI directlyThe person's name and your question, through GBCI's contact route (it opens the USGBC and GBCI help center)GBCI "reserves the right to release information regarding an individual's application and credential record to state and federal authorities, licensing boards, employers, and others"Section 15 of the Disciplinary and Exam Appeals Policy

The directory and the certificate answer "did this person earn it?" The status answers "may they use it today?" A certificate PDF is printed once and does not change when the credential lapses, so never treat it as proof of current status on its own.

How do you verify a LEED credential, step by step?

  1. Ask the same way for everyone. "I confirm credentials before I submit anyone. Which LEED credential do you hold, which specialty, and what status and renewal date does your Credentials Dashboard show? Could you send the certificate PDF?"
  2. Search the USGBC directory yourself by name, using the LEED credential filter. Try the name as the candidate uses it professionally; name changes and middle names explain most misses.
  3. Match the credential and the specialty. A LEED Green Associate is not a LEED AP, and a LEED AP O+M is not a LEED AP BD+C. Read the exact designation.
  4. Confirm the status. Active is current. Inactive or expired means the holder may not present the credential (next section).
  5. If the directory and the candidate's documents disagree, or you cannot find the person, ask the candidate first, then contact GBCI. We could not find a USGBC page that says whether a holder can keep a listing out of the directory, so a missing listing is a reason to ask, not proof of anything.
  6. Record the result with the template at the end of this page.

What do active, inactive and expired mean for a LEED credential?

GBCI's Credential Maintenance Program Guide sets a two-year reporting period that "starts when the credential is earned (based on the exam date) and ends 2 years minus 1 day" later, per the Green Associate handbook. In that period a LEED Green Associate must earn 15 continuing education (CE) hours, 3 of them LEED-specific, and a LEED AP with specialty must earn 30, 6 of them LEED-specific in the specialty; each additional specialty adds 6 LEED-specific hours. The renewal policy "effective November 3, 2023" sorts every credential into three statuses:

StatusWhat the CMP Guide saysWhat it means for you
Active"A credential holder within their 2-year reporting period"Current; note the end date for re-checks
InactiveA holder "who did not renew their credential during the 2-year reporting period"; they have up to 12 months to report hours and renew, with a reactivation fee after the first 30 days, and during this period "may not include their credential information in their email signatures, business cards, or social media profiles"Not presentable today; ask whether and when they will renew
ExpiredA holder who did not renew during the active and inactive periods; the status renders the credential "invalid," and the only route back is to retest, starting with the LEED Green AssociateNot held; treat a current claim as a misstatement to raise with the candidate

Two details avoid false alarms. A LEED AP who lets the AP credential expire has to start the credentialing process again, with the Green Associate exam or the combined exam, so an older AP may legitimately reappear as a recent Green Associate. And GBCI can grant hardship extensions, for example for military deployment or long-term illness, if the holder asks before the credential expires.

Which LEED credential is on the resume?

DesignationWhat USGBC and GBCI sayHiring note
LEED Green Associate"A foundational professional credential"; no prerequisites; a 100-question exam with a passing score of 170 out of 200 (USGBC)Green building basics; the correct short form is "LEED Green Associate," and USGBC says "LEED GA" is not approved
LEED AP with specialty: BD+C, ID+C, O+M, Homes, ND"An advanced professional credential"; candidates must hold a current Green Associate or take the combined exam, and be 18 or older (USGBC)The specialty matters: BD+C for new construction, O+M for existing buildings, ID+C for interiors
Legacy LEED AP (no specialty)USGBC's brand guidelines describe Legacy LEED APs as "those who completed their LEED credentials before implementing the LEED 2009 Credentialing Program"An older credential; ask whether the person has since earned a specialty
LEED FellowLEED APs nominated by peers, with at least 10 years in the industry and a LEED AP with specialty, after a portfolio review (USGBC)USGBC links a LEED Fellow directory from its credentials page
LEED Green Rater; Green Classroom ProfessionalUSGBC calls these certificates, listed separately from the professional credentialsReal, but not a LEED AP or Green Associate

One timing note for 2026: candidates who sat the LEED v5 beta exam receive a "Notice of Completion," not a result. The LEED AP handbook says beta results "are estimated to be available by February 2027." A notice of completion is not a pass, so verify again once results are released.

Does the job or the project actually need a LEED credential?

Usually it is a preference, not a legal requirement, so screen for it only where the work or the contract calls for it. On LEED projects the credential can earn a point: the LEED v4.1 Building Design and Construction rating system includes an Innovation credit, "LEED Accredited Professional," worth 1 point, which requires that "at least one principal participant of the project team must be a LEED Accredited Professional (AP) with a specialty appropriate for the project." That is why the specialty matters. USGBC now also offers LEED v5, so check the version your project is registered under, and read the owner's specifications and your contract rather than assuming. Sourcing language for these roles is in the Boolean search strings for construction managers.

What does a fake or lapsed LEED claim look like?

  • "LEED certified" for a person. Buildings are certified; people hold credentials. Ask which credential they mean. Many people say it loosely, so treat it as a question, not a finding.
  • A LEED AP with no specialty on a recent resume. It may be a legacy credential; ask.
  • A training course certificate presented as the credential. Only the GBCI exam earns it: the handbook says "The only way to earn the LEED Green Associate credential is to earn a score of at least 170 or higher on the exam."
  • A certificate PDF with no directory match and no status from the Credentials Dashboard after a reasonable request.
  • An inactive or expired status on a credential presented as current.

Pause, ask the candidate, check again, and apply the same rule to every candidate at the same stage. GBCI's disciplinary policy lists revocation among its sanctions, permits use of a credential's name and logo only for the duration of certification, and says people concerned about a possible violation of GBCI rules "are encouraged to contact GBCI" with a written statement. If you conclude a credential was misrepresented, do that and follow your own process (see resume fraud red flags and how to report candidate fraud). A directory match proves a holder with that name exists, not that the person on your call is that holder, so match it to your identity step before the offer (see the candidate identity verification checklist).

How often should you re-verify, and when does the FCRA apply?

Verify before the offer or the client submittal, and again when the two-year reporting period ends if the role, the project or the contract needs a current credential. A search you run yourself in the USGBC directory is generally not a consumer report. If a background screening company verifies the credential as part of its report, the Fair Credit Reporting Act applies: the standalone disclosure and written authorization first, and the pre-adverse and adverse action notices if the result counts against the candidate (see the FCRA background check process for recruiters).

What should AEC staffing agencies and recruiters do?

  • Verify before you submit. The agency is the party telling the client the candidate holds the credential, and which specialty.
  • Send the result, not the PDF. For example: "LEED AP BD+C, found in the USGBC directory on [date]; status active per the candidate's dashboard, reporting period ends [date]."
  • Check your contract. Owner and client contracts sometimes name a LEED AP with a specific specialty for a project role; read yours rather than assuming.
  • Diary the reporting period end for contractors on long projects that require a current credential.
  • Screen the work, not the letters. The construction project manager phone screen questions cover how to ask about the LEED projects behind the credential.

What should the verification record say?

LEED verification record (example; adapt to your policy)
Candidate name (as listed): [name]
Credential claimed: [LEED Green Associate / LEED AP BD+C / ID+C / O+M / Homes / ND / Legacy LEED AP / LEED Fellow]
USGBC directory result: [found, credential matches / found, different credential / not found], on [date]
Certificate PDF received: [yes / no]
Status (from Credentials Dashboard or GBCI): [active / inactive / expired]   Reporting period ends: [date]
GBCI contacted: [no / yes, date and answer]
Project or contract requires: [none / LEED AP with specialty: ____ / current status]
Checked by: [name], on [date]   Next check due: [date]
Third-party screener used (FCRA steps followed): [no / yes, vendor and date]

Questions people ask

How do I verify that someone is a LEED AP or LEED Green Associate?

Search the person's name in USGBC's people directory at usgbc.org/people, which can be filtered by LEED credential; GBCI's candidate handbook says that within 72 hours of the exam appointment the results are processed and, if applicable, the credential is updated in the USGBC directory. Then ask the candidate for the certificate they downloaded from their Credentials Dashboard and the credential status it shows. If the two do not match, contact GBCI, whose disciplinary policy reserves the right to release credential record information to employers. Record what you saw and the date, as of November 2026.

Do LEED credentials expire?

Yes, if they are not maintained. GBCI's Credential Maintenance Program Guide sets a two-year reporting period from the exam date: a LEED Green Associate must earn 15 continuing education hours, 3 of them LEED-specific, and a LEED AP with specialty 30 hours, 6 of them specific to the specialty. Under the renewal policy effective November 3, 2023, a credential not renewed becomes inactive for up to 12 months and then expires; an expired credential is no longer valid and the holder must retest.

Can someone with an inactive LEED credential still list it?

No. GBCI's Credential Maintenance Program Guide says that during the inactive period credential holders may not include their credential information in their email signatures, business cards or social media profiles, and the same applies once the credential expires. An inactive holder can still renew within 12 months of the end of the reporting period by reporting the missing hours and paying the reactivation fee.

If a candidate is a LEED AP, should they also list LEED Green Associate?

No. GBCI's LEED AP with Specialty Candidate Handbook says holders should no longer use LEED Green Associate, because the LEED AP with specialty credential supersedes it. A LEED AP must hold or pass the Green Associate first, so a resume that lists both is not a red flag, but the AP specialty is the credential to verify.

Does a LEED project require a LEED AP on the team?

Not as a prerequisite in the rating systems we checked. In LEED v4.1 Building Design and Construction, having a LEED AP is an optional Innovation credit worth 1 point, which requires at least one principal participant of the project team to be a LEED AP with a specialty appropriate for the project. Check the rating system and version your project uses, now including LEED v5, and any owner or contract requirement.