How to verify a security clearance: DCSA, DISS and what candidates may claim
On this page
- Who can verify a security clearance?
- What is DISS, and what changed in 2026?
- How does a cleared employer verify a candidate's clearance, step by step?
- What can a candidate truthfully say about a clearance?
- Which clearance claims deserve a second look?
- How should staffing agencies handle cleared requisitions?
- What if a clearance claim does not check out?
- Summary: verifying a clearance
- Questions people ask
You cannot verify a security clearance yourself unless your organization is a cleared contractor or a government security office with access to the government's system of record. For Defense Department and most industry clearances that system is the Defense Information System for Security (DISS), run by the Defense Counterintelligence and Security Agency (DCSA); a cleared company's facility security officer (FSO) checks the candidate's eligibility in its Joint Verification System. Recruiters and uncleared staffing agencies ask every candidate the same factual questions, record the answers as "stated by the candidate," and leave the check to the cleared employer's FSO. This reflects DCSA's pages and 32 CFR part 117 as of November 2026.
Not legal advice. Checked against DCSA's DISS, DISS FAQ and FSO FAQ pages and the NISPOM rule at 32 CFR 117.10 as of November 2026. Your FSO and the government customer decide how the rules apply to a role.
How to word clearance questions on the first call is in cybersecurity analyst screening questions, and where they sit in the loop is in the cybersecurity interview guide. This page covers the verification itself: who can check, how, and which claims deserve a second look.
Who can verify a security clearance?
DCSA's DISS FAQ says "a minimum of interim secret eligibility is required to access DISS," each user needs a government-approved PKI card or certificate, and personnel are granted access "for the specific purpose of verifying eligibility and determining access to classified information of their service members/employees and/or visitors." That rules out most of the people who ask.
| Who you are | Can you check? | What to do |
|---|---|---|
| FSO at a cleared contractor | Yes, in DISS, for your employees, candidates you are processing, and visitors | Look up eligibility in the Joint Verification System; record the result, not a screenshot |
| Security office at a federal agency | Yes, in the systems DCSA lists: DISS, the Central Verification System (CVS) and Scattered Castles | DCSA's status page says to check those systems before calling DCSA |
| Recruiter or HR at a cleared company | Not yourself | Ask your FSO; DISS accounts sit with security staff |
| Staffing agency or uncleared employer | No | Record what the candidate states; the client's or prime contractor's FSO verifies |
| The candidate | Through their security officer | DCSA's Check Your Status page tells DoD contractor employees to contact their company's FSO, and people no longer affiliated with the government to request their records |
What is DISS, and what changed in 2026?
DCSA describes DISS as the system of record for personnel security, suitability and credential management for DoD military, civilians and contractors; it replaced the Joint Personnel Adjudication System (JPAS) on March 31, 2021. Its Joint Verification System (JVS) "enables DoD professionals to document security clearance access and verify eligibility determinations." Two rules matter for hiring: DCSA says there is "NO AUTHORIZED USE OF DISS PRINTOUTS," so an FSO should never send a screenshot to a recruiter or client, and an account found to have been misused can be terminated and its user permanently barred from another DISS account.
The systems are being consolidated. DCSA's April 2026 Voice of Industry newsletter said data and functions were moving from CVS to DISS-JVS, with about 12 million subject records already migrated and CVS scheduled to become read-only on July 7, 2026, and that case initiation functions would move from the NBIS system into DISS-JVS during summer 2026. For a recruiter, the practical point is unchanged: the check is done by a security officer in a government system, not by you.
How does a cleared employer verify a candidate's clearance, step by step?
- Confirm the role needs a clearance, and at what level. The FSO FAQ says the company decides which positions need a clearance "based on contractual needs and requirements." Write the level into the requisition so every candidate is asked the same question.
- Ask for facts, not labels. Level (Confidential, Secret or Top Secret), the agency that granted it, roughly when the last investigation was completed or whether the person is enrolled in continuous vetting, and when they last worked in a cleared job.
- Collect identifiers only when the FSO is ready to check. A DISS lookup needs the person's identifying details; DCSA's DISS resources include a job aid on verification by Social Security number. Send them to the FSO through a secure channel, not by email to the hiring team.
- The FSO checks eligibility in DISS and records the outcome in neutral words: "eligibility at Secret confirmed in DISS on [date] by [FSO]." No printouts, no screenshots.
- If eligibility is current, DCSA's January 2025 DISS management guidance says a contractor that hires someone with current eligibility and a reasonable expectation of granting access may affiliate the record with its security management office; if the person is not enrolled in continuous vetting, an updated SF 86 goes to DCSA.
- If eligibility is not current, DCSA's processing page treats someone who never held a clearance, or whose clearance was terminated more than 24 months ago, as an initial case. Under 32 CFR 117.10(f), a contractor may submit the request before the start date only after a written commitment for employment that the candidate has accepted in writing, with employment to begin within 45 days of eligibility being granted. (DCSA's FSO FAQ and status page still say 30 days; the regulation says 45.)
- If another agency granted the clearance, 117.10(a)(6) says not to start a new request but to use reciprocity under SEAD 7, giving the new agency the person's full name, date and place of birth, Social Security number, clearing agency and type of investigation.
Two limits apply throughout. Requests "will not be used to establish a cache of cleared employees" (117.10(a)(5)), and contractors may not submit requests for people who are not their employees or consultants, including subcontractors' employees (117.10(a)(7)). A staffing agency cannot clear a candidate so that it has cleared people to offer.
What can a candidate truthfully say about a clearance?
- The level. DCSA's FSO FAQ lists three levels, Top Secret, Secret and Confidential, and says Sensitive Compartmented Information (SCI) and Special Access Programs need special approval on top. "TS/SCI" describes eligibility plus an access decision, not a fourth level.
- That the government granted it. The FAQ says individuals "cannot apply for a personnel security clearance application on their own" and contractors cannot grant, deny or revoke one. A clearance from a previous employer was the government's decision, sponsored by that employer.
- Eligibility and access are different. DCSA's 2025 guidance describes a "break in access," when an employee keeps eligibility but is debriefed because the job no longer needs classified access. A candidate can truthfully hold eligibility without current access.
- Old investigations are not automatically dead. DCSA's maintenance page cites a December 7, 2016 DoD memo that personnel security clearances "do not expire," and says current eligibility should not be denied because an investigation is out of scope. The 24-month rule above still applies after a break.
- Interim is temporary. Under 117.10(l), temporary (formerly interim) eligibility may not exceed one year unless the agency approves it in the system of record, and non-U.S. citizens cannot receive it. The FSO FAQ says non-citizens are not eligible for a clearance at all, apart from a rare Limited Access Authorization.
- Nothing classified. Cleared employees sign the SF 312 nondisclosure agreement (117.10(g)). Do not ask about programs, sites or information, and accept "I can't discuss that" as a complete answer.
"Clearable" is not a status anyone can verify; it is a belief about a future investigation. Record it as such. On the employer side, DCSA's newsletters remind contractors that 32 CFR 117.9(a)(9) permits advertising positions that require a clearance, but not using the company's facility clearance for promotion.
Which clearance claims deserve a second look?
| Claim | Why it needs checking | What to ask or do |
|---|---|---|
| "Active TS/SCI" from a job that ended years ago | A break of more than 24 months means an initial case | "When did you last work in a cleared position, and for whom?" |
| A clearance tied to an employer whose dates do not match the resume | Eligibility follows a sponsoring employer; dates should line up | Verify the employment itself; see resume fraud red flags |
| A clearance from a foreign government | It is not a U.S. clearance and cannot be checked in DISS | Treat the U.S. role's requirement on its own terms |
| Reluctance to give identifiers after an accepted offer | The FSO cannot check without them | Explain who will see them and why; a refusal stops the cleared start |
| A clearance claim on a remote role, with camera problems or changing contact details | The FBI says North Korean IT workers target cleared roles | Run the identity checks in North Korean IT worker red flags |
The FBI's October 13, 2026 announcement says North Korean IT workers use identities or facilitators "with the qualifications to obtain a larger pool of jobs, including positions requiring U.S. government security clearances," target cleared defense contractors, and pay facilitators to "complete urinalysis tests or fingerprint submissions." It cites a December 4, 2025 Justice Department case in which a Maryland man showed his own driver's license and U.S. passport in an interview, was placed on a Federal Aviation Administration contract and received a PIV card, and then let an overseas co-conspirator do the work through remote access software. A verified clearance proves eligibility on a record; it does not prove the person on camera is the person on the record, or that they will be the one doing the work. The security side of that is in candidate fraud in cybersecurity hiring.
How should staffing agencies handle cleared requisitions?
- Get the requirement in writing from the client: level, whether eligibility must be current at submittal or can be processed after offer, and whether U.S. citizenship is required by the contract. Restricting a role to citizens is lawful only where a law, regulation, executive order or government contract requires it; see citizenship status discrimination in hiring.
- Ask the client's FSO when they verify, and plan the offer around it so a failed check does not undo an accepted offer.
- Write the submittal in stated terms: "Candidate states Secret eligibility granted by DCSA, last investigation 2024, last cleared role ended June 2026. To be verified by client FSO." Never "verified" unless an FSO told you so.
- Do not collect Social Security numbers at submittal. Pass them only to the FSO, at the stage the FSO asks for them.
- Military service is separate. A DD-214 shows service, not clearance eligibility; see how to verify military service.
What if a clearance claim does not check out?
- Ask before you conclude. Records can sit in another system DCSA lists, such as CVS or Scattered Castles, or under a prior name. Ask the candidate which agency granted it and when.
- Let the FSO resolve it with DCSA. The FSO, not the recruiter, contacts DCSA through its official channels.
- Treat a confirmed false claim as a misrepresentation under your normal process, documented in facts: what was claimed, what the FSO found, when.
- If it looks like an organized scheme, report it to the FBI at ic3.gov; how to report candidate fraud lists what to keep.
Summary: verifying a clearance
| Item | The rule | Source |
|---|---|---|
| Who checks | A security officer with a DISS account, at least interim Secret eligibility and a PKI card | DCSA DISS FAQ |
| Purpose limit | Verifying eligibility for the organization's own employees and visitors; no printouts | DCSA DISS FAQ |
| Initial case | Never cleared, or clearance terminated more than 24 months ago | DCSA processing applicants page |
| Before the start date | Written commitment accepted in writing; start within 45 days of eligibility | 32 CFR 117.10(f) |
| No cache | Requests not to build a pool of cleared employees; none for non-employees | 32 CFR 117.10(a)(5), (a)(7) |
| Other agency's clearance | Reciprocity under SEAD 7, not a new request | 32 CFR 117.10(a)(6), (h) |
| Temporary eligibility | Up to one year unless approved; not for non-U.S. citizens | 32 CFR 117.10(l) |
Not legal advice. DCSA pages, newsletters and 32 CFR part 117 checked as of November 2026.
Questions people ask
Can a recruiter verify a candidate's security clearance?
Not directly. Clearance eligibility for Defense Department and most industry clearances is recorded in the Defense Information System for Security (DISS), and DCSA limits DISS accounts to security officers with at least interim Secret eligibility who use it to verify eligibility for their own employees and visitors. A recruiter, or a staffing agency without a facility clearance, records what the candidate states and asks the cleared employer's facility security officer to verify it. As of November 2026; not legal advice.
Can a company without a facility clearance look up someone's clearance?
No. DISS access runs through cleared contractors and government security offices, and DCSA's guidance is that a candidate's status is handled by the security officer of the company or agency that holds the relationship. An uncleared company hiring for a role that needs a clearance relies on the cleared prime contractor or government customer whose security office will verify it.
Does a security clearance expire?
DCSA cites a December 2016 Defense Department memo saying personnel security clearances do not expire, and people with current eligibility in DISS should not be denied access because their investigation is out of scope. But DCSA also says that if a previous clearance was terminated more than 24 months ago, a new request is treated as an initial clearance. So ask when the candidate last held a cleared job, not only what level they once had.
What can a candidate say about their clearance on a resume?
A candidate can state the level, such as Secret or Top Secret, the granting agency and roughly when the last investigation was done, and you can ask for those facts in the same way for every candidate. They should not describe classified programs or information, which their SF 312 nondisclosure agreement forbids, and you should not ask. DCSA also allows cleared contractors to advertise positions that require a clearance.