How to verify a security guard license or registration: California, Texas, Florida, New York and the federal fingerprint check
On this page
- Where do you verify a guard license in each state?
- Which credential does the post need?
- Can a guard start before the license is issued?
- How does New York's Online Security Guard Registry work?
- What does the federal fingerprint check add?
- How do you verify a security guard, step by step?
- What should make you pause, and how often should you re-check?
- When does the FCRA apply, and what should staffing agencies do?
- Copy-ready verification record
- Questions people ask
To verify a security guard license, search the guard on the licensing agency of the state where the post is, and read the license or registration type (unarmed or armed), status and expiration date. As of November 2026 the official tools in the four most populous states are California's Department of Consumer Affairs license search for Bureau of Security and Investigative Services (BSIS) guard registrations, Texas DPS's TOPS licensee search, Florida's FDACS licensee search for Class D and Class G licenses, and New York's Online Security Guard Registry for registered employers. There is no national license, but a federal law lets employers in participating states get a fingerprint-based criminal history check. The thing employers most often miss: the armed credential is separate from the guard license and must be verified on its own.
What each state requires of the guard (age, training hours, license names) is summarized in the security guard screening questions and the security guard job description template. This page is the employer's verification procedure: which search, what to read, when someone may start, and what to keep.
Not legal advice. Statutes, regulator pages and the federal rule were read on official sites in November 2026. Some regulator pages carry older dates (noted below). Licensing is set by each state and some cities; confirm with the regulator for the post's location.
Where do you verify a guard license in each state?
| State | Credential | Where to verify | Rule to know |
|---|---|---|---|
| California | BSIS security guard registration ("guard card"); separate firearms permit | DCA License Search; BSIS says the registration appears on its "Verify a License" page once issued (BSIS guard fact sheet) | Registrations "not renewed within 60 days of expiration are canceled and cannot be renewed" (BPC 7583.20) |
| Texas | DPS non-commissioned or commissioned security officer license | TOPS licensee search | New licenses expire "2 years from the date of issuance" (DPS FAQ) |
| Florida | Class D security officer license; Class G to bear a firearm | FDACS Division of Licensing individual search | "Any individual who performs the services of a security officer shall have a Class 'D' license" (F.S. 493.6301(5)) |
| New York | Department of State security guard registration | Online Security Guard Registry (registered employers) and the Department's licensee search | The registry helps employers meet due diligence under 19 NYCRR 174.6 |
For other states, find the agency that licenses private security (often the state police, public safety or professional licensing department) and use its search. If the state does not license unarmed guards, check whether the city where the post is issues its own permit.
Which credential does the post need?
- Unarmed versus armed. Florida: "Only Class 'M,' Class 'MB,' or Class 'D' licensees are permitted to bear a firearm, and any such licensee who bears a firearm shall also have a Class 'G' license" (F.S. 493.6301(6)). Texas: non-commissioned applicants submit a Level II training certificate; commissioned applicants submit Level II and Level III certificates and a Declaration of Psychological and Emotional Health. California: a separate BSIS firearms permit.
- Training that must be complete before or after the start. Florida requires "a minimum of 40 hours of professional training" before a Class D license (F.S. 493.6303(4)(a)). California requires power to arrest training before registration, 32 hours of security officer skills within the first six months, and 8 hours of continuing training each year; BSIS says "employers are required to maintain records for the duration of the registrant's employment."
- In-house security departments. Texas says a private business's security department "may not employ security officers unless" it notifies DPS and joins its registry, when it employs commissioned officers, personal protection officers or certain uniformed non-commissioned officers (Occupations Code 1702.323(d), per the DPS page).
Can a guard start before the license is issued?
Only where the state allows it, and only on its conditions:
- California: "a person may work as a security guard pending receipt of their hard-copy security guard registration card" once BSIS has approved them, if they carry a printout of the approval and valid photo ID (BPC 7583.17, per the BSIS fact sheet). Approval comes first; an application alone is not enough.
- Texas: DPS's Working Prior to Licensure page (dated September 11, 2020, citing Occupations Code 1702.230) says that 48 hours after a substantially complete application with fees and electronic fingerprints, an applicant may be employed unarmed if the employer runs a background check that includes the DPS Criminal History and Sex Offender databases and keeps a record of it; if TOPS already shows "Licensed" or "Substantially Complete Application," a commercial criminal history check may substitute, but the sex offender registry must still be reviewed. No one may be employed in an armed capacity before licensure.
- New York and Florida: confirm on the regulator's pages before letting anyone start without a registration or license showing; the New York registry result itself tells an employer whether the person can be hired.
How does New York's Online Security Guard Registry work?
The Department of State says the registry "allows employers to determine the qualification of a security guard applicant." Employers log in with the eleven-digit employer registration number the Division of Licensing Services issued them (it starts with "11"), search by the applicant's Social Security number, and get a registration status, a determination of whether the person can be hired, and a transaction number. The registry is available to employers from 6:00 a.m. to 7:30 p.m., Monday through Friday. The Department tells employers to print the transaction summary and keep it as proof of due diligence under 19 NYCRR 174.6. Collect the Social Security number only through your onboarding system, never on a phone screen.
What does the federal fingerprint check add?
The Private Security Officer Employment Authorization Act of 2004 (section 6402 of Public Law 108-458) and its rule, 28 CFR part 105 subpart C, let an "authorized employer" of private security officers request a state and national fingerprint-based criminal history check through the state identification bureau, in states that have not opted out. The employer must certify to the state that it employs private security officers and will use the results only to screen them, and must get the employee's written consent and fingerprints (28 CFR 105.23 and 105.25). If the state has its own standards, the bureau applies them; if not, it tells the employer only whether the person was convicted of a felony, convicted within ten years of a lesser offense involving dishonesty or false statement, or the use or attempted use of physical force against another person, or charged with an unresolved felony in the previous 365 days. The employee may get a copy of what the state sent and challenge it (28 CFR 105.24). The rule says it does "not displace state licensing requirements." Criminal history rules in your state still apply; see the state pages such as California, Texas and New York, and individualized assessment.
How do you verify a security guard, step by step?
- Confirm the post: state and city, armed or unarmed, in-house or contract, and any client requirement such as a specific training certificate.
- Collect on the screen: license or registration number and type, the name exactly as licensed, expiration date, armed credential and its expiry if relevant (wording is in the security guard phone screen).
- Search the state regulator yourself and read type, status and expiration. Check the armed credential separately.
- Check training deadlines the state sets after hire and put them on a calendar.
- Run the state's pre-employment steps (New York's registry, Texas's DPS database checks where they apply) and keep the printouts.
- Match the license to the person with government ID at onboarding; a license number is easy to borrow.
- Save everything with the date and who ran it.
What should make you pause, and how often should you re-check?
Pause on no record, an expired or canceled status, an unarmed license offered for an armed post, a guard card from another state for a post in yours, or a photo of a card instead of a search result. Ask, re-check, and treat the same finding the same way for everyone; report a forged card to the regulator named on it.
Re-check at every expiration date (two years for new Texas licenses), before moving a guard to an armed post, and before any post in another state. California's 60-day cancellation rule means a guard who misses renewal cannot simply renew late after that window, so track dates well ahead.
When does the FCRA apply, and what should staffing agencies do?
A criminal history or license report from a screening company is a consumer report, so the Fair Credit Reporting Act's disclosure, authorization and adverse action steps apply; see the FCRA background check process. A search your own staff run on a public regulator site usually is not.
California's BSIS describes guards as "employed by licensed Private Patrol Operators or private security employers." A general staffing agency placing guards with a client should first confirm whether the state requires the placing company itself to hold a security company license (Texas, for example, says services to third parties require a license under Occupations Code chapter 1702), then verify each guard before the submittal and state the result in it. Who tracks renewals and training deadlines during the assignment is a contract term: check your contract. Hiring loop questions are in the interview guide for security officer roles.
Copy-ready verification record
SECURITY OFFICER LICENSE VERIFICATION (EXAMPLE TEMPLATE)
Officer name (as licensed): ____________ Post state / city: ________
Post type: unarmed / armed In-house / contract Client: ________
Guard license or registration
State / agency: ________ Type: ________ Number: ________
Status: ________ Expires: __________
Source: ________________ Checked on: ________ By: ________
Armed credential (if armed post)
Type: ________ Number: ________ Status: ______ Expires: ______
Start before issuance? not allowed / allowed under state rule ________
State pre-employment steps (e.g. NY registry transaction no., TX DPS checks): ______
Training due after hire (hours / deadline): ________
Federal PSOEAA fingerprint check used? yes / no Consent on file: yes / no
Next due: earliest expiration: __________
Questions people ask
How do I verify a security guard license?
Search the guard on the licensing agency of the state where the post is: in California, the Bureau of Security and Investigative Services' registrations appear in the Department of Consumer Affairs license search; in Texas, the Department of Public Safety's TOPS licensee search; in Florida, the Department of Agriculture and Consumer Services' licensee search for Class D and Class G licenses; in New York, the Department of State's Online Security Guard Registry for registered employers. Read the license type, status and expiration, and keep a copy.
Can a security guard start work before the license is issued?
It depends on the state. California lets a person work pending receipt of the hard-copy registration card if the Bureau has approved them and they carry a printout of the approval and photo ID (Business and Professions Code section 7583.17). Texas DPS says that 48 hours after a substantially complete application with fees and fingerprints, an applicant may work unarmed if the employer runs a background check that includes the DPS criminal history and sex offender databases and keeps a record; armed work before licensure is not allowed.
Can a security company get an FBI fingerprint check on guard applicants?
In participating states, yes. The Private Security Officer Employment Authorization Act of 2004 and 28 CFR part 105 subpart C let an authorized employer submit a guard's fingerprints, with the employee's written consent and a certification to the state, through the state identification bureau for a state and national criminal history check. States may opt out, and the federal rule does not replace state licensing.
Does an armed guard need a separate license?
In the states we checked, yes. Florida law says only Class M, MB or D licensees may bear a firearm and must also hold a Class G license. Texas licenses commissioned (armed) security officers separately from non-commissioned officers, with extra training and a psychological declaration. California requires a separate Bureau firearms permit. Verify the armed credential on its own.