How to verify a sterile processing certification: HSPA's CRCST lookup, CBSPD's letter and state deadlines
On this page
- Where do employers verify a sterile processing certification?
- How do you verify a sterile processing tech, step by step?
- What do HSPA and CBSPD statuses and renewal dates mean?
- Which states require sterile processing certification, and by when?
- Is primary source verification required?
- What does a fake or lapsed sterile processing certification look like?
- How often should you re-verify, and when does the FCRA apply?
- What should staffing agencies placing sterile processing techs do?
- Copy-ready verification record
- Questions people ask
To verify a sterile processing certification, check the issuer: HSPA's Certification Verification page for the CRCST, Provisional CRCST, CIS, CER and CHL, which needs the technician's last name and HSPA ID number, and CBSPD's Verification of Certification service for the CSPDT and CBSPD's other credentials, by free phone call or a $10 letter. Then check the job state: Connecticut, Delaware, Minnesota, New York and Pennsylvania require hospitals and surgery centers to employ certified technicians, with 18 to 24 months from hire for those not yet certified and 10 hours of continuing education every year. The step employers most often miss is the calendar: a CRCST expires every year, a provisional CRCST lapses if the 400 hours are not documented within six months, and the state deadline runs from the date of hire. Everything below is as of November 2026.
The questions that collect the credential and test decontamination, sterilization and IFU knowledge are in the sterile processing technician screening questions. The neighboring operating room role is covered in how to verify a surgical technologist certification. This page is the verification step.
Not legal advice. HSPA's verification page and Certification Handbook (revised January 2026), CBSPD's verification, recertification and CEU pages, the statutes of Connecticut, Delaware, Minnesota, New York and Pennsylvania on their official sites, and the Joint Commission hospital requirements were read in November 2026. New Jersey and Tennessee also require certification; read their current rules, and your client contract, before you rely on this page.
Where do employers verify a sterile processing certification?
| Credential | Issuer | Where to verify | What you need | What you get |
|---|---|---|---|---|
| CRCST, Provisional CRCST, CIS, CER, CHL, CCSVP | Healthcare Sterile Processing Association (HSPA) | verify.myhspa.org; a paid integration for bulk checks is described on HSPA's hospitals and schools page | Last name and HSPA ID number | Name and certification status; HSPA's help article says you can print a "Letter of Verification" |
| CSPDT (technician), instrument processor and specialist, ambulatory surgery technician, flexible endoscope reprocessor, supervisor and management credentials | Certification Board for Sterile Processing and Distribution (CBSPD) | Verification of Certification: phone 908-236-0530, free, or a formal letter, $10 per name, emailed within 24 hours | Member name; CBSPD certification ID or last four digits of the SSN; certifications held. CBSPD says the certificant "must bring the ORIGINAL CBSPD, Inc. certification certificate to you first" | Verbal confirmation or a letter with CBSPD's seal |
HSPA's Certification Handbook says it will release "the certificant's name, certification effective and expiration dates, certification type, and certification status (certified or not certified.)" It also says "HSPA will not release your ID number without your consent; employers or other prospective parties would need to obtain that information directly from you." For CBSPD, ask for the certification ID number rather than part of a Social Security number; collect an SSN only where your own policy and process already do.
How do you verify a sterile processing tech, step by step?
- Collect at the screen: the credential and issuer, the HSPA ID or CBSPD certification ID, the name on the certificate, the expiration date, and for a provisional CRCST the exam date and hours still owed.
- For HSPA, enter the last name and HSPA ID on verify.myhspa.org and print the Letter of Verification for the file.
- For CBSPD, look at the original certificate, then call CBSPD or order the letter.
- Check the state rule for the facility's state (below) and note the technician's hire date and certification deadline.
- If the result does not match, confirm the name and ID with the candidate, then call the issuer.
- Save the result with the date and who ran it, using the record at the end of this page.
What do HSPA and CBSPD statuses and renewal dates mean?
HSPA. The handbook says "all HSPA certifications are time-limited to one year." Renewal is due "no later than the last day of the anniversary month of your CRCST certification," with 12 continuing education credits for the CRCST, more for each added credential, and a $50 annual fee. If renewal documents and fees are not received by the expiration date, "your certification(s) will be suspended and you will be considered non-certified." HSPA allows a six-week grace period, during which the technician "cannot use the title of CRCST"; after it, the technician must retake the exam. HSPA says its online verification "will be promptly updated to reflect individuals whose certification has expired or has been suspended or revoked."
Provisional CRCST. CRCST status requires passing the exam and 400 hours of hands-on experience. A candidate who tests first is provisionally certified and must document the hours within six months of passing; a one-time two-month extension is available only to someone working or volunteering in a sterile processing department, requested by the department's manager. If the hours are not submitted in time, the handbook says the result is "a forfeiture of your provisional CRCST certification." Provisional holders may call themselves "Provisional CRCST," not CRCST.
CBSPD. CBSPD's recertification page says "Initial certification is valid for five (5) years," and its CEU page says recertification needs 100 or 150 points over the five years, depending on the credential, or a retest. That five-year cycle does not track the states' annual continuing education rule below, so the employer has to track the yearly hours separately.
Which states require sterile processing certification, and by when?
HSPA's advocacy page lists Connecticut, Delaware, Minnesota, New Jersey, New York, Pennsylvania and Tennessee. We read five of the statutes:
| State | Who must be certified, and the new-hire deadline | Facility duties | Source |
|---|---|---|---|
| New York | Central service technicians in general hospitals and hospital-based ambulatory surgery settings: CRCST, CSPDT or "a substantially equivalent credential"; new hires have "eighteen months from the date of hire"; 10 hours of continuing education a year | A shortage exception requires "a diligent and thorough effort" and a written record of it | Public Health Law 2824 |
| Pennsylvania | Hospitals, ambulatory surgical facilities and freestanding surgical outpatient facilities may not employ or contract a technician without the CRCST or CSPDT; 18 months from hire; 10 hours a year | "Maintain documentation to verify" certification, or the employment dates behind the exemption for those working before the act took effect | Act 80 of 2020, sections 301-302 |
| Connecticut | Hospitals and outpatient surgical facilities: CRCST or CSPDT, or employment before January 1, 2016; others have "not later than two years after such person's date of hire"; 10 hours a year | Submit compliance documentation to the Department of Public Health on request; confirm a technician's employment dates in writing on request | Conn. Gen. Stat. 20-185r |
| Delaware | Hospitals and freestanding surgical centers: CRCST or CSPDT, or employment as of January 1, 2023; 18 months from hire; 10 hours a year | "Maintain documentation to verify" certification, including the date of employment | 16 Del. C. 3010A-3014A |
| Minnesota | Hospitals and ambulatory surgical centers: CRCST, CER, CSPDT or flexible endoscope reprocessor credential, or employment "on or before December 31, 2027"; 24 months from hire; 10 hours a year | Confirm a technician's employment dates in writing on request | Minn. Stat. 148.781, enacted in 2025 (1st Special Session, chapter 3) |
Each statute exempts licensed practitioners and supervised students, with some variation in wording, so a licensed nurse reprocessing within their own scope is outside the rule; read the exemption list for anyone else. The New Jersey and Tennessee rules are summarized in the screening questions page. Put the deadline (hire date plus 18 or 24 months) in your tracking system on the day you hire.
Is primary source verification required?
In the states above, for hospitals, it is in practice. The Medicare conditions of participation require hospitals to "assure that personnel are licensed or meet other applicable standards that are required by State or local laws" (42 CFR 482.11(c)), and the Joint Commission's hospital requirements (HR.11.01.03) call for verifying credentials "using the primary source when licensure, certification, or registration is required by federal, state, or local law and regulation," at hire and at renewal. The Joint Commission accepts primary source verification by phone if it is documented, which covers CBSPD's free call. Where no law requires the credential, the same standard asks the hospital to verify the credentials it requires, without the primary source requirement.
What does a fake or lapsed sterile processing certification look like?
- A CRCST whose expiration date has passed, or a status of not certified on HSPA's lookup.
- A "CRCST" who passed the exam months ago and has not finished the 400 hours.
- A course completion certificate from a training program presented as certification.
- A CBSPD claim with no original certificate to show and no certification ID.
- A new hire in a covered state who is past the 18- or 24-month deadline with no credential.
- An "exempt" technician with no record of employment before the state's cutoff date.
Renewals in process explain some gaps, so ask, call the issuer, and apply the same rule to every candidate at the same stage. HSPA's handbook says alleged misuse of its credential names "will be investigated by the Director of Certification" and that complaints "may be submitted by any individual or entity" in writing. The wider fraud patterns are in candidate fraud in healthcare staffing.
How often should you re-verify, and when does the FCRA apply?
Every year for HSPA credentials, at the end of the anniversary month plus the six-week grace period; every five years for CBSPD; at the six-month mark for a provisional CRCST; at the state deadline for an uncertified new hire; and every year for the state's 10 hours of continuing education. The expiration tracking guide shows how to keep these dates apart. A search your own staff run on the issuer's site is generally not a consumer report; if a background screening company verifies the credential as part of a report, the Fair Credit Reporting Act applies, with disclosure, written authorization and adverse action notices. See the FCRA background check process for recruiters.
What should staffing agencies placing sterile processing techs do?
- Verify before you submit, and send the client the dated result, not the candidate's certificate copy.
- Document exemptions. The Connecticut and Pennsylvania exemptions cover technicians employed or contracted by a health care facility before the cutoff date, so keep the facility's written confirmation of those dates; Connecticut and Minnesota require facilities to provide it on request.
- Check your contract. Client agreements say who verifies, which credentials the facility accepts and who tracks the annual continuing education; read yours rather than assuming.
- Re-check at each extension that crosses an HSPA anniversary month.
Copy-ready verification record
Sterile processing certification verification record (example; adapt to your policy)
Candidate name (as certified):
Facility state: ____ Hire date: ____ State deadline (if uncertified): ____
HSPA - Credential: [ ] CRCST [ ] Provisional CRCST [ ] CIS [ ] CER [ ] CHL
HSPA ID: ____ searched on ____ Status: ________ Expires: ____
Provisional: exam date ____ hours still owed ____ six-month date ____
Letter of Verification saved: [ ] yes
CBSPD - Credential(s): ________ Original certificate seen: [ ] yes
Verified by: [ ] phone, date ____ staff name ____ [ ] letter received ____
State exemption claimed: [ ] none [ ] employed before cutoff (record attached)
Annual continuing education (state rule): hours this year ____ due ____
Checked by: ________ Date: ________ Next check due: ________
The submittal line, for example (an invented example): "CRCST, HSPA verification run 2026-11-17, certified, expires 2027-04-30; Pennsylvania rule met; checked by D. Reyes."
Questions people ask
How do I verify a sterile processing technician's CRCST?
Use HSPA's Certification Verification page at verify.myhspa.org and enter the technician's last name and HSPA ID number; it returns the name and certification status, and HSPA says you can print a Letter of Verification. HSPA will not release the ID number without the technician's consent, so ask the candidate for it at the screen.
How do I verify a CBSPD sterile processing certification?
CBSPD's verification page says the certificant must first show you the original CBSPD certificate. You can then verify by phone free of charge at 908-236-0530, or order a formal verification letter for $10 per name, emailed within 24 hours. CBSPD asks for the member name, the CBSPD certification ID number or the last four digits of the Social Security number, and the certifications held.
What is a provisional CRCST?
A technician who passed HSPA's CRCST exam before completing the required 400 hours of hands-on sterile processing experience. HSPA's handbook gives six months after the exam to document the hours, with a one-time two-month extension the department manager can request; if the hours are not submitted in time, the provisional certification is forfeited and the exam must be retaken.
Which states require sterile processing certification?
As of November 2026, HSPA lists Connecticut, Delaware, Minnesota, New Jersey, New York, Pennsylvania and Tennessee. The statutes we read set different deadlines for new hires who are not yet certified: 18 months from hire in New York, Pennsylvania and Delaware, two years in Connecticut, and 24 months in Minnesota, where the law exempts technicians employed on or before December 31, 2027. Each of those five statutes also requires 10 hours of continuing education a year.
How long is a CRCST good for?
One year. HSPA's handbook says all its certifications are time-limited to one year, with renewal due by the last day of the anniversary month of the CRCST, 12 continuing education credits and a $50 renewal fee. If renewal is not received by the expiration date, the certification is suspended and the technician is not considered certified, with a six-week grace period to catch up.