How to

How to verify an EPA 608 certification: the issuing program, the wallet card and the online list

On this page
  1. Who issues EPA 608 certification, and does EPA keep a database?
  2. What must a genuine 608 wallet card show?
  3. How do you verify a 608 certification, step by step?
  4. Which 608 type does the job need?
  5. Does EPA 608 certification expire?
  6. What does a fake or doubtful 608 claim look like, and what do you do?
  7. When does the FCRA apply, and what should staffing agencies do?
  8. Copy-ready verification record
  9. Questions people ask

To verify an EPA Section 608 technician certification, check it with the EPA-approved certifying program named on the technician's wallet card, not with EPA: EPA says it "does not issue certification cards and cannot replace a lost certification card," and the program "is required to maintain records of cards it issues." Since January 1, 2018, every program except federally run ones must publish online a list of the technicians it certified on or after January 1, 2017, with the certification type and date, though technicians may opt out. Confirm that the program is on EPA's list of approved or formerly approved programs, that the card carries the details the rule requires, and, the step employers most often skip, that the type (I, II, III or Universal) covers the equipment the job services. Rules and lists below are as of November 2026.

This page covers the federal refrigerant-handling certification only. State and city HVAC or mechanical licenses are checked with the state board, as in how to verify a contractor license; questions that collect the 608 type on the first call are in the HVAC technician screening questions.

Not legal advice. The rule text below comes from 40 CFR part 82, subpart F on the eCFR, and the program lists and card guidance from EPA's Section 608 pages, all read on November 15, 2026. State and local licensing, client contracts and refrigerant wholesalers can require more.

Who issues EPA 608 certification, and does EPA keep a database?

The certification comes from passing an EPA-approved test given by an EPA-approved certifying program. Under 40 CFR 82.161, anyone "who could be reasonably expected to violate the integrity of the refrigerant circuit" while maintaining, servicing, repairing or disposing of appliances must pass that exam; since January 1, 2018 the rule covers non-exempt substitute refrigerants as well as class I and class II refrigerants. EPA publishes the list of approved certifying programs, which as of November 2026 includes trade associations, training companies, community colleges, unions and military schools, each with its EPA approval date. Programs marked with an asterisk are for their own company's employees only.

EPA does not run a national lookup. The records sit with the programs: under appendix D to subpart F, each program must keep the names and addresses of everyone tested, their scores, and the dates and locations of the tests, and those records "must be maintained indefinitely, unless transferred to another certifying program or EPA." A program that has stopped testing is listed on EPA's page of programs no longer approved, with the dates each one was approved; EPA says a certification "is still valid if it was received from any of these programs during the time that they were approved."

What must a genuine 608 wallet card show?

Appendix D sets a minimum. Programs must issue "a standard wallet-sized identification card no later than 30 days from the date of the test," and the card must carry the items in the table. Use them as a checklist when the candidate sends a photo of the card.

Card element (appendix D, section f)What to check
Name of the certifying program, with the date it received EPA approvalThe program and date match EPA's approved list, or fall inside the approval window on the no-longer-approved list
Name of the person certifiedMatches the candidate's name, allowing for documented name changes
Type of certificationType I, II, III or Universal, and that it covers the job's equipment
A unique number that "does not include a technician's social security number"A card number built from a Social Security number does not meet the rule
The statement that the person "has successfully passed a [Type] exam on how to responsibly handle refrigerants as required by EPA's National Recycling and Emissions Reduction Program"Present, with the same type as the type field

The technician also has duties that help you: 82.161(a)(4) says technicians "must keep a copy of their certificate at their place of business" and keep it "until three years after no longer operating as a technician." Asking for the card is asking for something they are already required to hold.

How do you verify a 608 certification, step by step?

  1. Collect the card at the screen or before the offer: a clear photo or copy, the name used at the test, the certifying program and the certification type.
  2. Check the program against EPA's approved list or the no-longer-approved list, including the approval dates.
  3. Check the card's required elements from the table above.
  4. Search the program's published list or lookup. Under 82.161(b)(6), the list must show the technician's first name, middle initial and last name, city of residence when tested, type or types of certification, and the date each was received, and programs "must update these lists at least annually." Each program publishes its own: ESCO Institute, for example, runs a Verify Certifications lookup that asks for first name, last name and certificate number, and NATE posts its list as a spreadsheet on its EPA 608 technicians page, which in November 2026 linked a list of technicians certified through September 16, 2024.
  5. If the technician is not listed, contact the program. A missing entry is common: lists start with certifications from January 1, 2017, federally run programs are exempt, technicians may opt out, and a list may not yet include a recent test. With the candidate's permission, send the program the name and card number and ask it to confirm the type and date.
  6. Match the type to the work (next section), and check any state or city license separately.
  7. Record the result with the date, the route you used and who checked.

Which 608 type does the job need?

TypeWhat it covers under 40 CFR 82.161(a)(1)What to ask the hiring manager
Type ISmall appliancesIs the work limited to small appliances? If not, Type I alone does not cover it
Type IIMedium-, high- and very high-pressure appliances, except small appliances, MVACs and MVAC-like appliancesWhich equipment the technician will service, and its pressure class per the manufacturer
Type IIILow-pressure appliancesWhether any low-pressure equipment is on the route or site
UniversalAll appliances in Types I, II and IIIWhether the role moves between equipment types, where Universal avoids gaps

Three details cause most mismatches:

  • Section 609 is not 608. Section 609 certifies technicians for motor vehicle air conditioning. EPA's refrigerant sales restriction page says "Section 609 certified technicians cannot purchase refrigerants that are intended for use with stationary equipment."
  • Universal needs a proctored core. EPA's certification requirements page says "Core tests taken as an open book exam cannot be used to get your Universal Certification."
  • Apprentices. They are exempt from certification only while "closely and continually supervised by a certified technician," per 82.161(a)(2). An uncertified apprentice can fill an apprentice role, not a solo service route.

The certification also matters for buying refrigerant: EPA says employers can buy it if they give the wholesaler "written evidence that he or she employs at least one properly certified technician," which is another reason to keep a copy of each card. How to word the type in a posting is in the HVAC technician job description template.

Does EPA 608 certification expire?

No. EPA's requirements page says "Section 608 Technician Certification credentials do not expire." Two caveats: a certificate can be revoked or suspended for failing to follow the rules, after which the technician "would need to recertify" (82.161(a)(3)), and EPA "reserves the right to specify a requirement for technician recertification at some future date" by a Federal Register notice (82.161(a)(5)). So one verification at hire is normally enough for the 608 itself; the state licenses many HVAC roles also need do expire and are re-checked on their own cycle.

What does a fake or doubtful 608 claim look like, and what do you do?

  • A program name that appears on neither EPA list, or a card dated outside the program's approval window.
  • A card missing a required element, or a card number that is the holder's Social Security number.
  • "608 certified" on a resume that turns out to be Type I only, for a Type II job.
  • A Section 609 card presented for stationary equipment work.
  • A course completion certificate instead of a card. EPA says it "does not review or approve any training preparatory programs or materials"; only the exam certifies.
  • A name that does not match the candidate, with no explanation.

None of these is proof of fraud on its own. Ask the candidate, verify with the program, and apply the same rule to every candidate. If the card cannot be confirmed, the candidate can still be considered for work that does not open a refrigerant circuit, or as a supervised apprentice. A lost card is common: EPA's replacement steps send the technician to the issuing program first; if it has closed, ESCO Institute and Ferris State University replace cards for technicians with documentation, which EPA says can include a copy held by "a current or former employer"; otherwise the technician retakes the test. Broader identity checks are in how to verify a candidate's certifications.

When does the FCRA apply, and what should staffing agencies do?

A check you run yourself with the certifying program is generally not a consumer report. If a background screening company verifies the certification as part of a report, the Fair Credit Reporting Act's disclosure, written authorization and adverse action steps apply; see the FCRA background check process for recruiters.

Agencies placing HVAC, refrigeration or appliance technicians should collect and verify the card before the submittal, name the type and program in it ("EPA 608 Universal, ESCO Institute, confirmed on ESCO's lookup on [date]" rather than "608 certified"), and keep the copy in the worker file. Check your client contract for who holds the copy at the job site and whether the client wants its own check; licensing of other trades is covered in professional license verification for recruiters.

Copy-ready verification record

EPA Section 608 verification record
Candidate name: [name, as on card]
Certification type: [Type I / Type II / Type III / Universal]
Certifying program on card: [program name], EPA approval date on card: [date]
Program status: [on EPA approved list / on no-longer-approved list, approved from ___ to ___]
Card number: [number] (not a Social Security number: [yes])
Card elements present: [program and approval date / name / type / number / required statement]
Route: [program's online list / program lookup / email or call to program]
Result: [confirmed, certified on ___ / not listed, awaiting program reply since ___ / not confirmed]
Type covers job equipment: [yes / no, because ___]
Copy of card filed: [yes, location ___]
Checked by: [name], on [date]
Third-party screener used (FCRA steps followed): [no / yes, vendor and date]

Questions people ask

Can I look up an EPA 608 certification number online?

Not with EPA. EPA does not issue Section 608 cards and keeps no public lookup; the EPA-approved certifying program that tested the technician holds the record. Since January 1, 2018, non-federal programs must publish online a list of the technicians they certified on or after January 1, 2017, and some, such as ESCO Institute, run a lookup by name and certificate number. If the technician is not listed, ask the program to confirm the card with the technician's permission.

Does EPA 608 certification expire?

No. EPA says Section 608 technician certification credentials do not expire, and certifications from programs that are no longer approved remain valid if they were issued while the program was approved. A certificate can still be revoked or suspended for violations under 40 CFR 82.161, and EPA reserves the right to require recertification in the future by a Federal Register notice.

What should a technician do if they lost their EPA 608 card?

Contact the certifying program that issued it, which must keep records of the cards it issues, and ask for a replacement. If that program has closed, EPA says ESCO Institute and Ferris State University will issue a new card to a technician who has documentation of passing the exam, including a copy of the card held by a current or former employer. Without any documentation, the technician has to retake the test.

Which EPA 608 type does an HVAC technician need?

It depends on the equipment. Under 40 CFR 82.161, Type I covers small appliances; Type II covers medium-, high- and very high-pressure appliances other than small appliances and motor vehicle air conditioning; Type III covers low-pressure appliances; and Universal covers all three. Match the type on the card to the equipment the job services, and check the job's state or local license separately.

Is a Section 609 certification the same as EPA 608?

No. Section 609 certification is for motor vehicle air conditioning. EPA's refrigerant sales restriction says Section 609 certified technicians cannot buy refrigerant intended for stationary refrigeration and air-conditioning equipment, so a 609 card does not qualify someone for stationary HVAC or refrigeration work that requires 608 certification.