How to

How to verify an NCCCO crane operator certification: VerifyCCO, the wallet card and the OSHA 1926.1427 evaluation

On this page
  1. Where do you verify a CCO certification?
  2. How do you verify a crane operator, step by step?
  3. What does OSHA 1926.1427 require on top of the card?
  4. What do CCO's credentials and expiration dates mean?
  5. Which states and cities license crane operators?
  6. What does a fake or lapsed crane certification look like?
  7. When does the FCRA apply?
  8. What should staffing agencies do?
  9. A copy-ready crane operator verification record
  10. Questions people ask

To verify an NCCCO crane operator certification, enter the operator's CCO ID or certification number on VerifyCCO, the free lookup run by the National Commission for the Certification of Crane Operators, which now presents itself as CCO Certification. VerifyCCO tells users the number is "on the CCO wallet card," and the result lists the person's active credentials with their expiration dates. Then do the step employers most often skip: OSHA's construction crane rule, 29 CFR 1926.1427, also requires your own documented evaluation of the operator on your equipment, and says "Possession of a certificate or degree cannot, by itself, cause a person to be qualified" for it. As of November 2026.

Not legal advice. Checked against 29 CFR 1926.1427 and 1926.1428 on the eCFR, CCO's employer FAQ, accreditation and policy pages, VerifyCCO, and the California and Washington rules linked below, in November 2026. States with OSHA-approved plans, cities and project owners can add licensing and other requirements.

This page is the verification. Questions that test a candidate's real lifts, types and configurations are in the crane operator screening questions, which also summarize the OSHA rule in a few lines.

Where do you verify a CCO certification?

RouteWhat you needWhat it showsSource
VerifyCCOThe CCO ID or certification number from the wallet cardThe credential holder and active credentials with expiration dates; a number not found returns an error asking you to check itverifycco.org
CertConnect in the myCCO portalA free organization account; the employees connect to itCCO calls it "ongoing, real-time monitoring of connected employees' certifications"CCO employer FAQ; myCCO
CCO directlyThe name and numberHelp when the lookup fails; VerifyCCO lists 703-560-2391 ext. 7 and [email protected]VerifyCCO
Your own evaluation recordYour evaluator and your craneWhether the operator is qualified on that equipment, as 1926.1427(f) requires29 CFR 1926.1427(f)

How do you verify a crane operator, step by step?

  1. Ask for the CCO ID or certification number and the exact designations on the card. A neutral line: "I confirm crane certifications with the issuer before I submit anyone. What is your CCO ID, and which crane types are on your card?"
  2. Search VerifyCCO yourself. Confirm the name matches your application and the identity you checked at onboarding.
  3. Match the credential to the job. OSHA requires accredited certification "based on equipment type, or type and capacity" (1926.1427(d)(1)(ii)(B)). A mobile crane certification for one type does not cover a tower crane, and a rigger or signalperson credential is not an operator certification. CCO's Industry Resources page has a crane type database for matching a make and model to its designation.
  4. Read the expiration date and plan for it if it falls during the assignment.
  5. Check local licensing for the site (section below). Where a qualifying state or local license exists, the operator needs it to work in that jurisdiction.
  6. Run and document your evaluation before the operator works independently.
  7. Record the result with the template at the end.

What does OSHA 1926.1427 require on top of the card?

RequirementWhat the rule saysParagraph
Before operatingThe employer "must ensure that each operator is trained, certified/licensed, and evaluated" before operating covered equipment; until then, only as an operator-in-training under continuous monitoring(a), (b)
Which credentialA qualifying state or local license where one is issued for that jurisdiction; otherwise certification by an accredited testing organization or an audited employer program(c)(1), (c)(2), (d), (e)
PortabilityAccredited certification "is portable among employers"; an audited employer program certificate and a U.S. military qualification are not(d)(3), (e)(6), (a)(3)
DurationAccredited and audited-program certifications are valid for 5 years; a government license for the period the licensing office sets, up to 5 years(d)(4), (e)(6), (c)(1)(v)
CostRequired certification or licensure is provided "at no cost to employees"(c)(3)
EvaluationSkills, knowledge and ability to recognize and avert risk on the equipment, including safety devices, operational aids, software, and size and configuration (lifting capacity, boom length, attachments, luffing jib, counterweight set-up), plus the hoisting activities the work requires(f)(1)
Who evaluatesSomeone with the knowledge, training and experience to assess operators, who is "an employee or agent of the employer"(f)(4), (f)(5)
DocumentationOperator's name, evaluator's name and signature, date, and make, model and configuration of the equipment, available at the worksite while the operator is employed(f)(6)
LanguageThe certification documentation must note the language of the test, and the operator may run only equipment whose manuals and load charts are in that language(h)(2)
Not coveredDerricks, sideboom cranes and equipment rated at 2,000 pounds or less (their own training rules apply)(a)(2)

The certification paragraphs took effect on December 10, 2018 and the evaluation and documentation requirements on February 7, 2019 (1926.1427(k)). Signalpersons are a separate rule: under 29 CFR 1926.1428(a), the employer ensures each one is qualified through a third-party qualified evaluator or its own qualified evaluator (not portable), and keeps documentation at the site that names each type of signaling covered. A CCO Signalperson credential is one way to show the third-party route; check what the documentation covers.

What do CCO's credentials and expiration dates mean?

CCO lists 17 national programs on its certifications page, including mobile, articulating, tower and overhead crane operator, rigger, signalperson, telehandler, digger derrick and service truck operator, lift director, crane inspector, assembly/disassembly director, and an evaluator of crane operator program. Its accreditation page says most CCO certifications are accredited by the ANSI National Accreditation Board under ISO/IEC 17024. Its employer FAQ says most certifications are "valid for five years while others are valid for 3 years," so read the date on each credential rather than assuming a cycle.

CCO's policies list grounds for suspension or revocation that matter to an employer: falsifying information on documents submitted to CCO, "culpability in an accident during certification period," and noncompliance with CCO's substance abuse policy. CCO says it may release a statement about a certificant under formal sanction, suspension or revocation, including on a list published on its website, so a credential that was current last year can show differently today.

Which states and cities license crane operators?

The federal rule defers to qualifying state and local licenses, and CCO's Industry Resources page links state and city licensing tools and its reciprocity guidelines. Two state examples confirmed on the official text:

  • California (general industry): 8 CCR 5006.1 requires mobile and tower crane operators to hold a certificate for the type of crane from an accredited certifying entity, after a physical examination, a substance abuse test and written and practical exams; certificates are valid for a maximum of five years.
  • Washington (construction): WAC 296-155-53300 requires a valid certificate from an accredited testing organization for the equipment type, documented operating hours by crane type and capacity under its Table 3, renewal at least every five years, and the employer's evaluation documentation at the job site.

Ask the client or general contractor whether the site's city licenses crane operators, and confirm on the city's own site.

What does a fake or lapsed crane certification look like?

  • A number VerifyCCO cannot find, or one that returns a different name.
  • "Certified for all cranes." Certification is by type, or type and capacity.
  • An expired date on the credential the job needs, or only a rigger or signalperson credential for an operator seat.
  • A training-school certificate presented as certification. CCO's certification versus qualification page explains that a course certificate "confirms attendance" and is not third-party certification.
  • An employer-program card from another company. Audited-program certificates are not portable (1926.1427(e)(6)).

When the record and the claim disagree, pause, ask the operator, confirm with CCO, and apply the same rule to every candidate at that stage. If you conclude a credential was misrepresented, follow how to report candidate fraud; CCO's ethics and discipline process handles falsification by certificants.

When does the FCRA apply?

Your own VerifyCCO search is your check. If a background screening company verifies certifications for you, treat its report as a consumer report: disclosure, authorization, and the adverse action steps in the FCRA background check process for recruiters.

What should staffing agencies do?

  • Verify before you submit and say which types and expiration you confirmed.
  • Settle the evaluation in writing. The rule puts it on "the employer," with an evaluator who is the employer's employee or agent; decide with the host who runs it, on which crane, and who keeps the documentation at the site. See OSHA rules for temporary workers.
  • Settle cost. Certification required under the section is provided at no cost to the employee; check your contract for who pays.
  • Track dates across long assignments, and re-check at each extension.

A copy-ready crane operator verification record

CRANE OPERATOR VERIFICATION RECORD (example; adapt to your policy)
Operator name:                      CCO ID / certification no.:
Searched on VerifyCCO by: [name]    Date: [date]
Credentials shown (type, capacity if listed, expiration):
Matches the job's crane: [make, model, configuration] [yes / no]
Test language noted on certification: [ ]
State or city license required at site: [none / which, number, verified how]
Employer evaluation (1926.1427(f)): evaluator [name, signature]
  date [ ]  equipment make/model/configuration [ ]
Documentation kept at worksite: [yes, where]
Signalperson or rigger documentation if needed: [ ]
Next check: [expiration date / assignment extension]

For OSHA 10 and 30 cards on the same crew, see how to verify an OSHA 10 or OSHA 30 card; other trade credentials are in how to verify a candidate's certifications. Not legal advice; checked as of November 2026.

Questions people ask

How do I verify a crane operator's NCCCO certification?

Enter the operator's CCO ID or certification number on VerifyCCO, the free lookup at verifycco.org run by the National Commission for the Certification of Crane Operators, which now presents itself as CCO Certification. VerifyCCO says the number is on the CCO wallet card, and the result lists the person's active credentials with expiration dates. Run it yourself rather than accepting a screenshot, and check that the certification covers the type of crane on your job, as of November 2026.

How long is an NCCCO certification valid?

CCO's employer FAQ says most CCO certifications are valid for five years and others for three, and that the individual expiration date shows in VerifyCCO and in the myCCO portal. Under OSHA's construction crane rule, 29 CFR 1926.1427(d)(4), a certification from an accredited testing organization counts for five years.

Does an NCCCO card mean the operator is qualified to run my crane?

No. OSHA's rule requires a separate employer evaluation under 29 CFR 1926.1427(f) covering the operator's skills, knowledge and ability to recognize and avert risk on the specific equipment, including its size and configuration, and it says a certificate cannot by itself make someone qualified for that purpose. The employer documents the evaluation with the operator's name, the evaluator's name and signature, the date, and the make, model and configuration of the equipment, and keeps it available at the worksite.

Is NCCCO the only crane operator certification OSHA accepts?

No. Under 29 CFR 1926.1427 an operator can meet the rule with a qualifying state or local license where one is required, a certification from any crane operator testing organization accredited by a nationally recognized accrediting agency, or an audited employer program, which is not portable to other employers. U.S. military qualifications count only for Department of Defense or Armed Forces employees operating for the issuing employer.

Who pays for crane operator certification for a new hire?

Under 29 CFR 1926.1427(c)(3), whenever operator certification or licensing is required under the section, the employer must provide it at no cost to employees. For a staffing placement, settle in writing whether the agency or the host employer pays for and arranges certification and the evaluation.