What is a backfill position? How backfills are approved, and backfill vs new headcount
On this page
- What kinds of backfill are there?
- How is a backfill different from new headcount?
- How is a backfill approved?
- How do HR systems record a backfill?
- What changes when the person is on leave?
- Should a staffing agency fill the backfill?
- Example: one departure, two backfills
- What should a backfill requisition record?
- Which backfill mistakes cost the most?
- Questions people ask
A backfill position is an existing, already budgeted role that an employer reopens to replace the person who held it, because they resigned, were promoted or transferred, were let go, or are away on extended leave. Backfilling keeps headcount flat, unlike a new headcount request, which adds a seat. Most employers still require an approved requisition for a backfill, so finance can confirm the money is there and the hiring manager can confirm the job is still needed in the same form. When the person is on protected leave, such as FMLA or military leave, the backfill has to be temporary, because the law gives them a right to return (as of November 2026).
This page defines the term, shows how backfill approval usually works and how HR systems record it, and covers the leave rules. The request itself, in six versions, is in the backfill request template.
What kinds of backfill are there?
| Type | What triggers it | How long | What to watch |
|---|---|---|---|
| Like-for-like backfill | A resignation or dismissal; the job stays the same | Permanent | Check whether the job really is the same before copying the old job description |
| Changed-role backfill | A departure used to reshape the job (level, skills, location) | Permanent | A material change usually needs a fresh approval, like new headcount |
| Internal-move backfill | A promotion or transfer leaves a seat empty | Permanent | Two requisitions move at once; record which one created the other |
| Temporary backfill (leave cover) | Parental, medical or military leave, or a secondment | Until the person returns | Protected leave gives a right to return; see below |
| Interim backfill | A critical seat empties before the permanent hire can start | Weeks or months | Agency temps or contractors; agree an end date |
| Confidential backfill | Replacing someone who has not been told yet | Permanent | Handled as a confidential search; see how to run a confidential replacement search |
How is a backfill different from new headcount?
| Backfill | New headcount | |
|---|---|---|
| Headcount effect | Flat: refills a seat already in the plan | Adds a seat |
| Budget | Usually already in the budget (the leaver's salary line) | Needs new budget, often from the annual plan |
| Typical approval | Manager, HR or finance confirmation; sometimes one approver | Several approvers, often up to a senior leader |
| During a hiring freeze | Often still allowed in a "backfill-only" freeze; sometimes frozen too | Usually frozen |
| Requisition | A new requisition, linked to the departing employee | A new requisition linked to the headcount plan |
| Common mistake | Rehiring the job as it was, not as it is now needed | Opening a role finance never funded |
The freeze types, including the backfill-only freeze, are explained in what is a hiring freeze, and the planning side in the headcount planning template.
How is a backfill approved?
The steps vary by company, but most follow the same order. An example of a typical flow:
- The departure is confirmed. A resignation, a dismissal, an accepted internal move, or a leave with a known start date. Until it is confirmed, there is nothing to backfill.
- The manager decides what the seat should be now. Same job, a changed job, split the work across the team, or not refill at all. This is the most useful moment in the whole process: the seat is empty and nobody is attached to the old design.
- The manager raises a requisition marked as a backfill, naming the employee being replaced, the reason, the level and pay range, and the target start date. A short form for this is in the job requisition form template.
- Finance and HR confirm. Finance checks the budget line still exists; HR checks the level, pay range and job classification.
- Recruiting opens the requisition under its own number. Do not reuse the leaver's old requisition; see what is a requisition number.
A backfill that changes level, location or pay range is usually treated as a new role, because the approvers are now deciding on a different job.
How do HR systems record a backfill?
As a field on the requisition linking it to the person being replaced. Two examples from vendors' public documentation, as of November 2026:
- Workday. The Create Job Requisitions page (updated May 2026) documents a "Replacement For" field, where, for a requisition in a job management organization or a new position, you can select an active or terminated worker; when a position is or was occupied, Workday fills in the current or preceding incumbent. Its job requisition setup steps say the simplified Start Job Requisition task can show a "Replace a worker" or "Add a worker" choice, and that a Create Job Requisition step can be added to business processes that vacate jobs or positions, such as Termination.
- Greenhouse. Greenhouse lets Site Admins, and Job Admins who can manage custom fields, create custom opening fields, including Yes/No and User types, on its Core, Plus and Pro tiers, so a team can add its own backfill flag and "employee replaced" field to each opening.
Whatever the system, record the replaced employee in a field, not only in free text, so you can report backfills separately from growth hires.
What changes when the person is on leave?
The backfill has to be temporary, and everyone involved should know it from the start.
- FMLA leave. Under 29 CFR 825.214, an employee returning from FMLA leave is entitled to the same position or an equivalent one, and the rule says this applies even if the employee has been replaced or the position restructured to accommodate the absence.
- Military leave (USERRA). The Labor Department's regulation at 20 CFR 1002.139(a) says an employer may not refuse to reemploy a returning service member on the basis that another employee was hired to fill the position during the absence, even if reemployment means ending the replacement's employment. The eligibility conditions (notice, five years of cumulative service, timely return) are in 38 U.S.C. 4312.
- State leave laws can add their own reinstatement rights; check the state where the employee works.
In practice: post the cover role as temporary or fixed-term, tell candidates it ends when the employee returns, and keep the employee's reason for leave out of the posting and the requisition. This is not legal advice; check any leave-related backfill with HR or counsel.
Should a staffing agency fill the backfill?
For interim and leave cover, often yes: the agency employs the temporary worker, so the client does not add a permanent employee it will not need when the person returns. Agree in writing the expected end date, the notice either side gives to end the assignment, and whether the client may hire the temp later and on what fee terms. For a permanent backfill, an agency search works like any other permanent search; give the recruiter the honest reason the seat is open, because candidates will ask why the last person left.
Example: one departure, two backfills
Invented example. The people, roles and dates below are fictional.
A team lead in customer support is promoted to manager on March 1. Her move creates the first backfill: the team lead seat. The manager decides to fill it internally, and a senior support agent is promoted on March 15, creating the second backfill: one support agent seat, which goes to an external hire. Two requisitions, each linked to the person replaced, and headcount ends where it started.
What should a backfill requisition record?
Fields to copy into your requisition form or ATS (an example; adjust to your system):
Requisition type: Backfill (permanent) / Backfill (temporary cover)
Employee replaced: [name, employee ID]
Reason seat is open: Resignation / Dismissal / Internal move / Leave
Last day or leave dates: [date] / [from - expected return]
Job changes vs. before: None / Level / Location / Pay range / Duties
(any change: attach justification)
Budget line: [cost center, confirmed by finance on date]
Linked requisition: [the requisition that created this seat, if any]
End condition (temp): Ends on [date] or on the employee's return
Keep medical or personal reasons for leave out of every field; "leave, expected return [date]" is enough.
Which backfill mistakes cost the most?
| Mistake | What it causes | Fix |
|---|---|---|
| Copying the old job description without review | Hiring for the job as it was | Review duties with the team before posting |
| Posting leave cover as permanent | Two people with a claim to one seat when the employee returns | Post as temporary with the end condition stated |
| Reusing the leaver's requisition | Mixed applicant records and wrong time-to-fill figures | Open a new requisition linked to the old one |
| Treating a changed role as a backfill | Approvers sign off on a job they did not see | Flag the change and re-approve |
| Waiting for the last day to start | A long gap with the work spread across the team | Raise the requisition when the departure is confirmed |
A backfill posting is still a job posting: pay range and other posting rules apply as they would to a new role; see pay transparency laws by state.
Questions people ask
What does backfill mean in a job posting?
It means the employer is replacing someone who held the role, rather than adding a new seat. The person may have resigned, been promoted or transferred internally, been let go, or be away on leave, in which case the backfill is usually temporary. A backfill posting is otherwise a normal job posting and has to meet the same pay transparency and posting rules.
Is a backfill the same as new headcount?
No. A backfill keeps headcount flat by refilling a seat that was already budgeted, while new headcount adds a seat the budget did not have. Many companies approve backfills faster, but during a hiring freeze or a cost review a backfill can need the same justification as a new role, especially if the job is changing.
Do I need approval to backfill a role?
Usually, yes. Most employers require a requisition for every hire, including backfills, so that finance confirms the budget is still there and the hiring manager confirms the role is still needed in the same form. The approval is often lighter than for a new role, but it is rarely automatic.
Can I permanently replace an employee who is on FMLA leave?
Not in a way that defeats their return. Under 29 CFR 825.214, an employee returning from FMLA leave is entitled to the same or an equivalent position even if the employer replaced them or restructured the job while they were away. Cover the absence with a temporary backfill and write the end condition into that arrangement.
Who pays for a temporary backfill through a staffing agency?
The hiring company pays the agency's bill rate for the temporary worker, usually from the department's budget for the absent employee's salary or from a contingent labor budget, depending on company policy. The agency employs and pays the worker; agree the expected end date and the notice to end the assignment before it starts.