What is a hiring bar? What raising and lowering the bar mean, how to write one down, and how to keep it lawful
On this page
- What does "hiring bar" mean in practice?
- What does "raising the bar" mean, and where does the phrase come from?
- What does lowering the bar look like?
- How is a hiring bar different from job requirements, a rubric, a scorecard and a bar raiser?
- How do you set a hiring bar?
- How do you keep the bar the same across interviewers?
- What makes a hiring bar lawful?
- What does a written hiring bar look like?
- How do you know whether the bar is set right?
- Questions people ask
A hiring bar is the minimum standard a candidate must meet to receive an offer for a role: the must-have qualifications, plus the lowest acceptable rating on each competency the interviews assess, written down before the first interview and applied the same way to every candidate. "Raising the bar" means setting that standard so each hire strengthens the team; Amazon, which made the phrase common, says every person hired "should be better than 50 percent of those currently in similar roles." "Lowering the bar" means offering the job to someone below the standard, usually under deadline pressure. A bar only works if it is written as observable evidence, such as a 3 on an anchored 1 to 5 scale, rather than as a feeling.
This page defines the term and shows how to write a bar down. How to turn the bar into a decision rule, with absolute, relative and comparative bars and split panels, is on the hire or no-hire decision framework; how Amazon's program works is on what is a bar raiser interview.
What does "hiring bar" mean in practice?
The phrase is informal, so teams use it for different things. A usable bar has four parts, and each one can be checked by someone other than the hiring manager:
| Part | What it says | Made-up example for a support team lead |
|---|---|---|
| Gates | Pass/fail requirements that are truly essential to the job | Two years leading a support queue; available for the posted shift |
| Minimum ratings | The lowest acceptable score on each assessed competency, on an anchored scale | At least 3 of 5 on coaching, prioritization, written communication and customer judgment |
| Disqualifiers | Evidence that ends the process whatever the scores | A confirmed false claim on the resume |
| Decision rule | How the parts combine into an offer or no offer | All gates passed, no rating below 3, and at least two ratings of 4 |
Licences that a job legally requires are gates, checked pass or fail, never scored. Everything else in the bar should come from the job itself; how to conduct a job analysis covers how to find out what that is.
What does "raising the bar" mean, and where does the phrase come from?
Amazon describes the idea behind its Bar Raiser program, which it says began in 1999 as the "Barkeeper Program" and was renamed because the goal was to raise the standard rather than keep it, in a single rule: "Every person hired should be better than 50 percent of those currently in similar roles" (Amazon, January 9, 2019). That is a relative bar, measured against the current team. Most other teams mean something simpler: a written standard set high enough that each hire improves the team, held even when the role has been open a long time.
Raising the bar does not mean adding requirements. Extra degree requirements, years of experience or "nice to haves" turned into must-haves make the bar longer, not higher, and they shrink the pool without showing who will do the job better. A higher bar is usually a stricter minimum rating on the few competencies that matter most.
What does lowering the bar look like?
Teams rarely decide to lower the bar. It happens in small steps, and these are the usual signs:
- Ratings rounded up in the debrief ("a strong 2, call it a 3").
- A must-have waived for one candidate but not for the others.
- "We can train that" said about a skill the bar listed as essential on day one.
- A stage skipped because the candidate has another offer.
- Thin evidence accepted: an interviewer who cannot point to anything the candidate said or did.
- A different bar for referrals, internal candidates or a favored agency's submittals.
The fix is not to refuse every change. If the market shows the bar was wrong, change it on purpose: revise the written bar for all remaining candidates, record what changed, why and when, and brief the interviewers. A deliberate change is a better decision than a quiet exception, and it is far easier to defend later.
How is a hiring bar different from job requirements, a rubric, a scorecard and a bar raiser?
| Term | What it is | How it relates to the bar |
|---|---|---|
| Job requirements | The qualifications listed in the job description and requisition | The source of the bar's gates; only the essential ones become gates |
| Hiring rubric | What each score means for each criterion | The anchors that make a minimum rating checkable; see what is a hiring rubric |
| Interview scorecard | The form each interviewer fills in with ratings and evidence | Where each candidate's evidence is compared with the bar |
| Decision rule | The written rule that turns scores into hire or no hire | The bar's last part; see the hire or no-hire framework |
| Bar raiser | A trained interviewer from outside the hiring team who guards the standard | A person who enforces the bar; see bar raiser interview |
| Hiring committee | A group that makes or approves decisions from written evidence | Another way to hold the bar steady across searches; see what is a hiring committee |
How do you set a hiring bar?
- Start from a job analysis. List what the person must do in the first year and what it takes to do it.
- Choose four to six competencies that separate good from adequate performance in this job, not a generic list.
- Write anchors for each one: what a 1, 3 and 5 sound like for this role; see behaviorally anchored rating scales and the 1 to 5 interview rating scale.
- Set the minimum rating per competency and the few true gates. Mark which competencies can be trained after hire and keep those out of the gates.
- Write the decision rule, including what happens when evidence is missing.
- Calibrate: have every interviewer score the same sample answer alone, then compare; see interview calibration.
- Sign it off before the first interview, and share it with the recruiter and any agency.
- Review it after the first few hires against how they actually perform.
How do you keep the bar the same across interviewers?
- Score independently before the debrief, so the most senior voice does not set everyone's rating; see what is a hiring debrief.
- Tie every rating to evidence: what the candidate said or did that earns the score. "Seemed sharp" does not clear a bar; a quoted answer can be checked against the anchor. If you use an AI note taker, check that each score points to the candidate's actual words; Interview Signal, which we make, attaches the candidate's own quotes to each scorecard score and removes any quote it cannot find in the transcript.
- Watch each interviewer's pass rate over time. An interviewer who passes almost everyone, or almost no one, is applying a different bar.
- Use the same bar for every source. Referrals, internal candidates and agency submittals meet the same written standard.
What makes a hiring bar lawful?
A demanding bar is lawful. Two federal rules decide whether a particular bar holds up (as of November 2026; not legal advice):
- Disparate impact. If a requirement or cutoff "causes a disparate impact on the basis of race, color, religion, sex, or national origin," the employer must show it "is job related for the position in question and consistent with business necessity" (42 U.S.C. 2000e-2(k)(1)(A)). See disparate treatment vs disparate impact and the four-fifths rule.
- Cutoff scores. The Uniform Guidelines say "Where cutoff scores are used, they should normally be set so as to be reasonable and consistent with normal expectations of acceptable proficiency within the work force" (29 CFR 1607.5(H)). They add that evidence enough to support a procedure "on a pass/fail (screening) basis may be insufficient" to support ranking candidates by it (1607.5(G)). A bar is a cutoff in this sense.
Two more limits follow from other laws. The bar must never include a protected characteristic or a stand-in for one, such as age, accent, family plans or health; "culture fit" is the usual way that slips in (see how to assess values without culture-fit bias). And when a test is part of the bar, the ADA requires it to be given so that results reflect the skills it measures rather than a candidate's impaired "sensory, manual, or speaking skills" (42 U.S.C. 12112(b)(7)); see ADA accommodations in interviews.
What does a written hiring bar look like?
A template to copy, filled in with a made-up example; replace every line with your own role's evidence:
HIRING BAR STATEMENT (example; agree before the first interview)
Role: Support Team Lead Req: ________ Date set: __/__/____
Owner: [hiring manager] Signed off by: [HR partner]
1. GATES (pass/fail, essential only)
- Has led a support queue or team for 2+ years
- Available for the posted shift (Mon-Fri, 10:00-18:00)
2. MINIMUM RATINGS (anchored 1-5 scale; anchors attached)
Coaching agents ........................ 3 or higher
Prioritizing a queue under pressure .... 3 or higher
Written communication .................. 3 or higher
Customer judgment ...................... 4 or higher (most critical)
Trainable after hire, NOT in the bar: our ticketing tool, our macros
3. DISQUALIFIERS
- A confirmed false statement about experience or credentials
4. DECISION RULE
Offer if: all gates passed, no rating below its minimum, and every
rating supported by written evidence. Missing evidence = probe
again, not "assume yes."
5. CHANGES (date | what changed | why | who approved)
__/__/__ | ___________________________ | __________ | ________
How do you know whether the bar is set right?
Compare the bar with what happened after hire. If people who cleared it comfortably struggle in their first months, the bar is measuring the wrong things or sits too low; if a strong, well-sourced slate produces no one who clears it, check whether a gate is not truly essential. Track ratings at hire against later performance with quality of hire measures, and check selection rates by group for adverse impact. Then change the bar on purpose, in writing, for the next search.
Questions people ask
What does hiring bar mean?
A hiring bar is the minimum standard a candidate must meet to receive an offer for a role. In practice it is the must-have qualifications plus the lowest acceptable rating on each competency the interviews assess, written down before the first interview and applied the same way to every candidate. A bar that exists only as a feeling in the hiring manager's head is not a bar, because no one else can apply it.
What does it mean to raise the bar in hiring?
Raising the bar means hiring people who strengthen the team rather than merely filling the seat. The phrase is closely tied to Amazon, whose Bar Raiser program began in 1999 and which says every person hired should be better than 50 percent of those currently in similar roles. Other teams use it more loosely, to mean setting a higher written standard and holding it even when a role has been open a long time.
Is lowering the hiring bar ever the right call?
Changing the bar on purpose can be right; lowering it for one candidate rarely is. If a requirement turns out not to be essential, or a skill can be trained in the first months, change the written bar for every remaining candidate, record the reason and the date, and tell the interviewers. What causes trouble is quietly rounding one person's ratings up because the deadline is close.
Who sets the hiring bar?
The hiring manager usually owns it, working from a job analysis with the recruiter, and someone senior or an HR partner signs it off before interviews start. Some companies add a guardian of the standard who is not on the hiring team, such as Amazon's Bar Raisers or a hiring committee that reviews the written evidence, so the bar does not drift with each search.
Can a hiring bar be too high to be legal?
A high bar is lawful if it is job-related and applied to everyone the same way. Problems start when a requirement or cutoff screens out one group more than others: under Title VII the employer must then show the practice is job related for the position and consistent with business necessity, and the federal Uniform Guidelines say cutoff scores should normally be reasonable and consistent with normal expectations of acceptable proficiency in the workforce. This is general information, not legal advice.