How to

How to verify a plumber license by state: apprentice, journeyman and master lookups

On this page
  1. Who licenses plumbers, and where do you search?
  2. What do apprentice, journeyman and master mean in practice?
  3. How do you verify a plumber license, step by step?
  4. Which endorsements and specialty certificates should you check?
  5. Is the plumber's license the same as the plumbing contractor's license?
  6. What does a fake, lapsed or borrowed plumber license look like?
  7. How often should you re-verify?
  8. When does the FCRA apply, and what should staffing agencies do?
  9. Copy-ready verification record
  10. Questions people ask

To verify a plumber license, search it on the agency that licenses plumbers where the work will be done: the Texas State Board of Plumbing Examiners (TSBPE) public license search, Washington Labor and Industries' Verify a Contractor, Tradesperson or Business tool, the Illinois Department of Public Health (IDPH) plumber license verification, or a city's own lookup where the city licenses plumbers, as New York City does. Read the level (apprentice or trainee, journeyman, master), any endorsements, the status and the expiration date. What employers most often miss is the supervision chain: a journeyman or apprentice license only covers work done under the right licensed plumber, so verify that person too. Tools and rules below are as of November 2026.

This page is the verification step. Questions that collect the license level, the endorsements and service or new construction experience are in the plumber screening questions; how to write the level into an order is in the plumber job description template; the business license is covered in how to verify a contractor license.

Not legal advice. Agency pages for Texas, Washington, Illinois and New York City were read on November 16, 2026. Plumbing licensing is set by each state and, in some places, by cities; client contracts, permits and project specifications can require more.

A state agency in three of the four examples below, a city in the fourth. The agency where the job site is decides, not the agency where the plumber lives.

PlaceAgency and what it issuesOfficial lookupWhat the agency says
TexasTSBPE: Tradesman Plumber-Limited, Journeyman Plumber, Master Plumber and Plumbing Inspector licenses, the Responsible Master Plumber designation, apprentice registrations and endorsements (license types)Public License/Registration Search"There are four types of plumbing licenses"; an endorsement is "a certification that you can add to a Journeyman, Master, or Plumbing Inspector License"
WashingtonL&I Plumber Certification Program: trainee, journey level (PL01), medical gas (MG01), residential (PL02), residential service (PL04), pump and irrigation (PL03), domestic well (PL03A) and backflow (PL30) certificates (plumber certification)Verify a Contractor, Tradesperson or Business"You must be certified by the Washington State Plumber Certification Program to work in the plumbing trade in Washington"; the tool lets you "verify a tradesperson is certified" (L&I)
IllinoisIDPH, under the Illinois Plumbing License Law (225 ILCS 320): plumbers, plumbing contractors, plumbers' apprentices, irrigation contractors and retired plumbers (IDPH plumbing)Plumber license verification"All plumbing contractors must register with the state and pay an annual fee"; licenses "must be renewed by April 30th following the date of issuance"
New York CityDepartment of Buildings: Master Plumber licenses and registrations (obtain a Master Plumber license)Skilled Trades Licensees/General Contractors/Registrant Search, linked from DOB's Check License & Registration Status pageMaster Plumber experience must be gained "under the direct and continuing supervision of a Licensed Master Plumber," including time "as a registered journeyman plumber"

What do apprentice, journeyman and master mean in practice?

The titles are similar across places, but the hours, the supervision rules and what each level may do are set by each agency:

  • Texas apprentice. A registered plumber's apprentice "may learn about and assist with the installation of plumbing." Direct supervision "means that a person who holds a plumbing license issued by the TSBPE is on the job site with you," and "if a licensee is not present, a Plumber's Apprentice may only perform manual tasks like digging trenches." Hours count only after registration.
  • Texas journeyman. A journeyman needs "at least 8,000 hours of experience working in the plumbing trade," may work only "under the supervision of a Responsible Master Plumber," and may "directly supervise a Plumber's Apprentice on all job sites."
  • Texas Responsible Master Plumber (RMP). An RMP must be "currently licensed as a Master Plumber in Texas," is "responsible for the general supervision and management of plumbing work" under contracts secured under the license, must keep "at least $300,000 of general commercial liability insurance," and may serve as RMP for "only one company at a time."
  • Washington trainee. A plumber trainee certificate "is good for 12 months," and trainees must "work under the direct supervision of a journey level or certified plumber." L&I gives no credit for hours worked without proper supervision, while the certificate is expired or inactive, or for out-of-state employers.
  • Illinois apprentice and licensed plumber. Apprentices must be at least 16 and show "proof of sponsorship by an Illinois licensed plumber or approved apprenticeship program"; a licensed plumber must first have worked at least four years as a licensed apprentice and passed the state exam.

So "journeyman" on a resume tells you a level, not a place, and logged hours are not a license.

How do you verify a plumber license, step by step?

  1. Collect the details at the screen: license or registration type and level, issuing state or city, number, name exactly as on the license, endorsements, and expiration date.
  2. Find where the work is. Ask for every job-site location, then identify which state or city licenses plumbers there.
  3. Search the agency's lookup yourself. Do not rely on a card photo, a wallet card or a link the candidate sends.
  4. Read the whole record: type, status, expiration date and any enforcement information the agency shows.
  5. Match the level and endorsements to the job. Medical gas work, for example, needs the endorsement or certificate the state issues for it (Texas's Medical Gas Piping Installation endorsement, Washington's MG01 certificate).
  6. Verify the supervisor. For apprentices, trainees and Texas journeymen, look up the licensed plumber or Responsible Master Plumber the work will be done under.
  7. Save the result with the date, the source and who checked, and diarize the expiration date.

Which endorsements and specialty certificates should you check?

  • Texas endorsements added to a journeyman, master or inspector license: Medical Gas Piping Installation, Multipurpose Residential Fire Protection Sprinkler Specialist and Water Supply Protection Specialist (endorsements). TSBPE says medical gas holders "must complete at least two hours of continuing professional education" to renew. Drain cleaner and residential utilities installer certifications attach to an apprentice registration.
  • Washington specialty certificates are separate certificate types with their own limits: the residential certificate is "limited to installation, maintenance, and repair of plumbing in single-family dwellings," and the backflow certificate is "limited to maintenance and repair of existing backflow prevention assemblies within a building."

A journeyman license without the endorsement does not cover the endorsed work, so read the record for the specific endorsement, not just the license.

Is the plumber's license the same as the plumbing contractor's license?

No. The individual license lets a person do or supervise plumbing; the business usually needs its own registration. Illinois registers plumbing contractors separately, with general liability, bodily injury, property damage and workers' compensation insurance. In Texas, the RMP takes responsibility for work done under the company's contracts. In Washington, L&I suggests confirming an "active contractor registration" and an "active and paid-to-date workers' comp account." In New York City, DOB requires a Master Plumber applicant to be "an officer, partner or sole proprietor of a business/company" with a place of business in the city. When you hire a plumber, verify the person; when a client hires your agency's plumbers, expect the client to check the business doing the work as well.

What does a fake, lapsed or borrowed plumber license look like?

  • No record in the state or city the candidate named, after you have checked spelling and number format.
  • A license from a different state than the job, presented as if it covered the work.
  • A Washington trainee certificate past its 12 months, or an Illinois license past its April 30 renewal.
  • A level below what the job needs, such as an apprentice for a journeyman order.
  • Medical gas or backflow work claimed without the endorsement or certificate on the record.
  • "I have my journeyman hours" offered in place of a license.

Pause the placement, not the conversation: ask the candidate, recheck the agency, and apply the same rule to every candidate. Renewals in progress and name changes are ordinary explanations. If you believe someone is working unlicensed or using another person's license, report it to the issuing agency through its complaint process.

How often should you re-verify?

At hire, at every expiration date, when an apprentice or trainee moves up a level, and whenever the work moves to a new state or city. Washington trainee certificates last 12 months and Illinois licenses renew each April 30, so assignments longer than a year will cross at least one renewal. In New York City, DOB says Master Plumber renewals should be filed "30-90 days before the expiration date" to avoid a late fee, with a continuing education certificate and a recent physical examination form (renewal page).

When does the FCRA apply, and what should staffing agencies do?

A lookup your own staff run on an agency's public site is generally not a consumer report. If a background screening company verifies licenses for you as part of a report, the Fair Credit Reporting Act's disclosure, written authorization and adverse action steps apply; see the FCRA background check process for recruiters.

Agencies should verify before the submittal, for the state or city of each job site, and write it plainly ("Journeyman Plumber, TSBPE, active, expires [date], working under RMP [name, license number], checked [date]" rather than "licensed plumber"). For crews that move between sites, check the new location before the move. Check your client contract for who verifies supervision and endorsements and who keeps the records, rather than assuming either side does. Sourcing strings for licensed plumbers are in Boolean search strings for plumbers, and the heating and cooling side is in how to verify an HVAC license.

Copy-ready verification record

PLUMBER LICENSE VERIFICATION RECORD
Candidate name: [name, as on license]
License or registration: [apprentice / trainee / tradesman / journeyman / master / RMP]
Issuing agency: [state agency or city], number: [number]
Endorsements or specialty certificates: [medical gas / backflow / water supply protection / none]
Job-site location(s): [city, state]; agency that licenses there: [agency]
Route: [TSBPE search / L&I Verify / IDPH verification / NYC DOB search / other]
Result: [active, expires ___ / expired / not found / enforcement shown: ___]
Level and endorsements meet the job: [yes / no, because ___]
Supervisor or RMP: [name, license number, status]
Checked by: [name], on [date]
Third-party screener used (FCRA steps followed): [no / yes, vendor and date]
Next re-check: [expiration date]

Questions people ask

How do I check if a plumber's license is valid?

Search it on the agency that licenses plumbers where the work will be done, using the agency's own lookup: for example the Texas State Board of Plumbing Examiners' public license search, Washington Labor and Industries' Verify a Contractor, Tradesperson or Business tool, the Illinois Department of Public Health's plumber license verification, or the New York City Department of Buildings' licensee search. Read the license level, any endorsements, the status and the expiration date.

Can a journeyman plumber work without a master plumber in Texas?

No. The Texas State Board of Plumbing Examiners says a journeyman may install, change, repair, service or renovate plumbing only under the supervision of a Responsible Master Plumber, and may directly supervise a plumber's apprentice on job sites. Verify both the journeyman's license and the Responsible Master Plumber the work is done under.

Does a plumber apprentice need a license?

In the three states we checked, yes: the apprentice or trainee must be registered, certified or licensed before working. Texas requires a plumber's apprentice registration, and says hours worked before registering do not count. Washington issues plumber trainee certificates that are good for 12 months, and Illinois licenses apprentices who are at least 16 and sponsored by a licensed plumber or approved program.

When do Illinois plumber licenses expire?

The Illinois Department of Public Health says plumber licenses must be renewed by April 30 following the date of issuance, through its online renewal page, as of November 2026. Plumbing contractors register with the state separately and pay an annual fee. Check the expiration date on the department's verification lookup.

Is a plumber license from one state valid in another?

Not automatically. Each state, and in some places each city, sets its own plumbing license, so a license is valid where it was issued unless the other agency accepts it. Illinois, for example, offers a reciprocity application for City of Chicago licensees. Verify the license issued or recognized where the job is.