How to verify an HVAC license: state air conditioning and mechanical contractor lookups, classes and technician registrations
On this page
- Who licenses HVAC work, and where do you search?
- Which class does the job need?
- What about the technicians who work under the license?
- How do you verify an HVAC license, step by step?
- What does the record not tell you?
- What does a fake, lapsed or borrowed HVAC license look like?
- How often should you re-verify?
- When does the FCRA apply, and what should staffing agencies do?
- Copy-ready verification record
- Questions people ask
To verify an HVAC license, search it on the state agency that licenses heating, air conditioning or mechanical work where the job is: the Texas Department of Licensing and Regulation (TDLR) license search for air conditioning and refrigeration contractors and registered technicians, Florida DBPR's Verify a License search for air-conditioning and mechanical contractors, North Carolina's license search for Heating Group licenses, or California's Contractors State License Board for a C-20 contractor. Read the status, the license class and its capacity limit, and whether the license belongs to the business or the person you are hiring. What employers most often miss is the class: a Class B license in Texas or Florida stops at 25 tons of cooling. EPA 608 certification is separate and is not a state license. Tools and rules below are as of November 2026.
Refrigerant certification is covered in how to verify an EPA 608 certification, and the general contractor-license check (name match, bonds, qualifiers) in how to verify a contractor license. This page is the HVAC-specific part: which state license, which class and which technician credential.
Not legal advice. Agency pages and statutes for Texas, Florida, North Carolina and California were read on November 16, 2026. HVAC licensing is set by each state and sometimes by cities and counties; permits, client contracts and project specifications can require more.
Who licenses HVAC work, and where do you search?
The state in the four examples below, under different names: air conditioning and refrigeration, air-conditioning or mechanical contractor, heating group, or warm-air heating, ventilating and air-conditioning contractor. The National Association of State Contractors Licensing Agencies keeps a state licensing information page that links each state's agency.
| State | Agency and license | Official lookup | What the agency says |
|---|---|---|---|
| Texas | TDLR Air Conditioning and Refrigeration program: contractor licenses (Class A or B, with endorsements), registered technicians and certified technicians (ACR program) | TDLR license search | "Contractors who install, repair, or maintain systems" need a TDLR license, and "ACR companies must employ an ACR contractor in each permanent location" |
| Florida | DBPR Construction Industry Licensing Board: Class A, B and C air-conditioning contractors and mechanical contractors, certified or registered (Fla. Stat. 489.105) | DBPR Verify a License | A certified contractor may contract "in any jurisdiction in the state"; a registered contractor only where it met the local competency requirement |
| North Carolina | State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors: Heating Group 1, 2 and 3 contractor licenses and technician licenses (applicant information) | Board license search | The board licenses contractors in "plumbing, HVAC, fuel gas piping, and fire sprinkler trades" |
| California | Contractors State License Board: C-20 Warm-Air Heating, Ventilating and Air-Conditioning Contractor (C-20 classification) | CSLB Check a License | A C-20 contractor "fabricates, installs, maintains, services and repairs" warm-air heating, ventilating and air-conditioning systems |
Which class does the job need?
This is where a valid license can still be the wrong one. The class sets the size of system, the type of building or the type of work:
| State and license | Limit, as the agency or statute states it | Source |
|---|---|---|
| Texas ACR Class A | "Allows you to work on any size unit" | TDLR contractor license |
| Texas ACR Class B | "Cooling systems of 25 tons and under, and heating systems of 1.5 million BTUs/hour and under" | |
| Florida Class A air-conditioning | Services "unlimited in the execution of contracts" | Fla. Stat. 489.105(3)(f)-(i) |
| Florida Class B air-conditioning | "Limited to 25 tons of cooling and 500,000 Btu of heating in any one system" | |
| Florida Class C air-conditioning | "Limited to the servicing of air-conditioning, heating, or refrigeration systems" | |
| Florida mechanical contractor | Services "unlimited in the execution of contracts" | |
| North Carolina H1-I and H1-II | "Wet" or water-based comfort heating; H1-II in single-family detached dwellings only | NC contractor license definitions |
| North Carolina H2 | Forced air heating and cooling "with cooling capacity in excess of fifteen (15) tons in any building" | |
| North Carolina H3-I and H3-II | Forced air heating and cooling of 15 tons or less; H3-I in any building, H3-II in single-family detached dwellings only |
Texas licenses also carry endorsements: Environmental Air Conditioning, Commercial Refrigeration, and Process Cooling or Heating, which TDLR describes as covering temperature, humidity or cleanliness "solely for production requirements." A commercial refrigeration job needs that endorsement on the record, not just an active license.
What about the technicians who work under the license?
- Texas registered technician. TDLR says "any person who assists a licensed air conditioning and refrigeration contractor" must register when doing maintenance or repair work, that "technicians must work under the supervision of a licensed air conditioning and refrigeration contractor," and that "registrations are valid for 1 year from the date of issue" (technician registration).
- Texas certified technician. "A voluntary qualification that exceeds the standards of Registered Technician designation," earned with 24 months of supervised work or a 2,000-hour approved program plus an exam (certified technician). It is a stronger credential, but the holder still works under a licensed contractor.
- North Carolina technician licenses. The board issues Plumbing, Heating and Fuel Piping Technician licenses for persons "employed by contractors or firms," with Class I requiring 18 months (3,000 hours) and Class II 15 months (2,500 hours) of experience.
- Florida and California. The licenses on the pages we checked are contractor licenses (Florida's air-conditioning and mechanical classes, California's C-20). For a technician role in those states, verify the employer's contractor license, the technician's EPA 608 certification, and any local requirement where the work is.
How do you verify an HVAC license, step by step?
- Collect the details: state, license or registration number, class and endorsements, the name exactly as on the record, and for a contractor license the business it is held for.
- Confirm the job's location and the systems involved: residential or commercial, tonnage, hydronic or forced air, refrigeration or process cooling.
- Search the agency's lookup yourself, not a card photo or a link the candidate sends.
- Read status, class, endorsements and expiration, and any enforcement information shown.
- Match the class to the systems using the table above or the agency's own definitions.
- For technicians, verify the supervising contractor and the technician's own registration or license, plus the EPA 608 type the refrigerant work needs.
- Save the result with the date, the source and who checked, and diarize the expiration date.
What does the record not tell you?
- Insurance. Texas requires ACR contractors to keep commercial general liability insurance "at all times while your license is active," with minimums of $300,000 per occurrence and $600,000 aggregate for Class A and $100,000 and $200,000 for Class B. Ask for the certificate of insurance; the lookup may not show it.
- Who the license qualifies. When you hire someone to be the license holder for your business, confirm on the record which business the license is tied to, and what happens to the business's license if that person leaves; the agency's rules decide it.
- Local rules. Cities and counties can add permits or local registrations. Ask the building department where the work is.
What does a fake, lapsed or borrowed HVAC license look like?
- A Class B license offered for a job above 25 tons, or an H3 license for a system above 15 tons in North Carolina.
- A Florida registered contractor outside the jurisdiction where it is registered.
- A Texas technician registration older than a year with no renewal on the record.
- An EPA 608 wallet card offered as the state license.
- A contractor license whose business name does not match the company you are hiring, or a candidate who says the license is "my boss's" and expects to work under it without registering.
Ask the candidate first, recheck the agency, and apply the same rule to every candidate. Report suspected unlicensed work or license misuse to the agency through its complaint process.
How often should you re-verify?
At hire, at each expiration date, and whenever the work moves to a new state or a larger system. TDLR contractor licenses and technician registrations are valid for one year from the date of issue, so a Texas technician on a long assignment needs a renewal check every year. EPA 608 certification does not expire, but the state license does.
When does the FCRA apply, and what should staffing agencies do?
A lookup your own staff run on an agency's public site is generally not a consumer report. If a background screening company verifies licenses for you as part of a report, the Fair Credit Reporting Act's disclosure, written authorization and adverse action steps apply; see the FCRA background check process for recruiters.
Agencies should verify before the submittal and write the result in one line ("TDLR registered ACR technician, active, expires [date]; EPA 608 Universal, card checked; supervising contractor [name, license number]") rather than "HVAC licensed." Ask the client which systems the worker will touch, so the class and endorsements match. Check your client contract for who verifies the supervising contractor and who keeps the records. Screening questions for the first call are in HVAC technician screening questions, and plumbing licenses, which North Carolina handles at the same board, in how to verify a plumber license.
Copy-ready verification record
HVAC LICENSE VERIFICATION RECORD
Candidate name: [name, as on record]
Credential: [contractor license / registered technician / certified technician / technician license]
Issuing agency and state: [TDLR / DBPR / NC board / CSLB / other], number: [number]
Class and endorsements: [Class A / B / C / H1 / H2 / H3 / C-20; endorsements ___]
Business the license is held for (contractor licenses): [name]
Job location and systems: [city, state; residential or commercial; tonnage; refrigeration?]
Result: [active, expires ___ / expired / not found / enforcement shown: ___]
Class covers the systems: [yes / no, because ___]
Supervising contractor (technicians): [name, license number, status]
EPA 608 type (if refrigerant work): [Type I / II / III / Universal; how checked]
Insurance certificate received (contractors): [yes / no, date]
Checked by: [name], on [date]
Third-party screener used (FCRA steps followed): [no / yes, vendor and date]
Next re-check: [expiration date]
Questions people ask
How do I check if an HVAC contractor's license is valid?
Search the license on the state agency that licenses air conditioning or mechanical contractors where the work will be done, using the agency's own lookup: for example the Texas Department of Licensing and Regulation's license search, Florida DBPR's Verify a License search, the North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors' license search, or California's Contractors State License Board for a C-20 license. Check the status, the class and its capacity limit, and that the license belongs to the business doing the work.
Does an HVAC technician need a license in Texas?
A technician who assists a licensed air conditioning and refrigeration contractor must register with the Texas Department of Licensing and Regulation, and registered technicians must work under the supervision of a licensed contractor. Registrations are valid for one year from the date of issue. A Certified Technician is a voluntary, higher qualification, and it still does not let the holder work without a licensed contractor.
Is EPA 608 certification an HVAC license?
No. EPA Section 608 certification is a federal requirement for technicians who handle refrigerants, and it does not expire, but it is not a state license to install or service HVAC systems. Verify both: the 608 certification for refrigerant work and the state license or registration for the work itself.
What is the difference between a Class A and Class B air conditioning license?
It depends on the state. In Texas, a Class A air conditioning and refrigeration contractor license allows work on any size unit, while Class B covers cooling systems of 25 tons and under and heating systems of 1.5 million BTUs per hour and under. In Florida, a Class A air-conditioning contractor is unlimited, while Class B is limited to 25 tons of cooling and 500,000 Btu of heating in any one system.
Do I need to verify the HVAC company or the technician?
Usually both. In the states we checked, the main HVAC license is a contractor license, while technicians may hold their own registration or technician license. Texas, for example, says air conditioning and refrigeration companies must employ a licensed contractor at each permanent location, and North Carolina issues technician licenses to people employed by licensed contractors.