How to verify a PMP certification: PMI's registry, Credly badges and suspended status
On this page
- Where do you verify a PMP certification?
- How do you verify a PMP, step by step?
- What do Active, Suspended, Expired and Retired mean?
- What does a fake or lapsed PMP look like?
- Does a registry match prove the candidate is the PMP?
- How often should you re-verify a PMP?
- When does the FCRA apply to a PMP check?
- What should staffing agencies do?
- What should the verification record say?
- Questions people ask
To verify a PMP certification, search the candidate in the PMI Certification Registry, which the Project Management Institute (PMI) says exists so that "employers, service purchasers, and others" can verify certification holders, or open the candidate's PMP digital badge on Credly and use its verify option. Read the name, the credential and the status: only an active PMP may use the title, because PMI places a holder who misses renewal in suspended status for a year, during which the person may not call themselves certified. The step employers most often miss is the opt-out: holders can remove themselves from the registry, so a missing name is a reason to ask for the badge link, not proof of fraud. Everything below is as of November 2026.
This page is the PMP-specific version of the check. For the other vendor certifications (AWS, Microsoft, ISC2, Salesforce and more) on one page, see how to verify a candidate's certifications; for state-issued licenses, see professional license verification for recruiters.
Not legal advice. PMI's registry, its Certification Handbook (revised June 2026) and its Continuing Certification Requirements (CCR) Handbook (last updated April 2026) were read on pmi.org in November 2026. Client contracts and government solicitations can require more than this page describes.
Where do you verify a PMP certification?
PMI gives employers two official routes and a candidate-held document:
- The Certification Registry. PMI's registry page says it finds "active and retired credential holders." The Country / Region field is required; First Name, Last Name and a Certifications filter (PMP, CAPM, PMI-ACP and the others) narrow the search. The page carries PMI's own warning: "Certification holders can opt out of inclusion on the registry and will not display on search."
- The Credly digital badge. PMI's certification FAQ says a new holder receives a digital badge by email from Credly, "which can be shared on social media and verified by employers." Credly says a viewer who clicks a badge "will be taken back to Credly to view all the details of your achievement" (Credly help center), and that badges can be checked with a "Verify" button without a Credly account (Credly).
- The certificate PDF. PMI's Certification Handbook tells holders to download their certificate from certification.pmi.org. A PDF is a copy the candidate controls, so treat it as a pointer to the registry or the badge, never as the verification itself.
How do you verify a PMP, step by step?
- Collect the details at the screen. The name exactly as it appears on the candidate's PMI account, the country or region on that account, the year earned and, if they have it, their certification number and the link to their PMP badge. Name changes, middle names and transliterations explain most mismatches, so ask now.
- Search the registry yourself. Select the country or region, enter the name, filter to Project Management Professional (PMP) and read the result. Run the search in your own browser from pmi.org; a screenshot or a screen share from the candidate is not a verification.
- If there is no match, try the other name spellings and the other countries the candidate has lived in, then ask for the Credly badge link.
- Open the badge link and check the domain. It should open on credly.com, show PMI as the issuer and the candidate's name, and pass the "Verify" check. Credly says an expired badge shows an "EXPIRED" icon and the verification popup shows the expiration.
- If neither route confirms it, contact PMI through its Contact Us page with the name and the certification number the candidate gave you, and pause any decision that depends on the credential until PMI answers.
- Record the result with the template at the end of this page.
Ask for the badge link in writing and keep the request neutral, for example: "Before I submit you to the client, I confirm certifications with the issuer. Could you send the link to your PMP badge, or confirm the name and country on your PMI account so I can search PMI's registry?"
What do Active, Suspended, Expired and Retired mean?
The status, not the fact that someone once passed the exam, decides whether a candidate may call themselves a PMP. PMI's CCR Handbook defines four statuses:
| Status | What PMI says | May the candidate use "PMP"? | What to do |
|---|---|---|---|
| Active | The holder met all renewal requirements, including PDUs and the renewal payment, before the cycle end date; active holders are "automatically listed" in the registry unless they opt out | Yes | Record it and, if the role requires a current PMP, the cycle end date |
| Suspended | Requirements were not met within the cycle; the suspension "lasts 1 year (12 months)" and the holder "may not refer to yourself as a certification holder or use the certification designation" | No, until reinstated | Ask the candidate; a renewal in progress is common and can be finished during the suspension year |
| Expired | Not renewed by the end of the suspension year; the person is "no longer considered a certification holder" and must reapply, pay the fees and retake the exam | No | Treat the PMP as not held; the experience behind it may still count |
| Retiree | A holder in good standing for at least 10 consecutive years who no longer earns primary pay in project, program or portfolio management may apply; no PDUs are required | Shown as retired | Expect this only from someone returning to the field; PMI says they can reapply for active status |
PMP holders renew every three years by earning 60 professional development units, at least 35 of them Education PDUs, with at least 8 in each area of PMI's Talent Triangle, per PMI's Maintain page. PMI's Certification Handbook says holders may use the designation after their name "as long as you have an active certification status."
What does a fake or lapsed PMP look like?
- Only a PDF or a screenshot, and no badge link or registry match after a reasonable request.
- A badge link that does not open on credly.com, or a badge page that names an issuer other than PMI. A course-completion badge or certificate from a training provider, such as a "PMP exam prep" course, is not a PMP.
- A PMP claimed as current that the badge shows as expired, or a candidate who says they are "between renewals." That is the suspended year, when PMI says the designation may not be used.
- The designation used as a company or product name. PMI's handbook says holders agreed not to use it "in company names, domain names, product names, or any other unauthorized manner."
- "PMP certified" with no project experience to describe. PMP eligibility requires documented project experience and training, and PMI's handbook says it can audit "at any time, including after the certification has been bestowed." A candidate who cannot walk through the projects behind the credential deserves more questions; the project manager phone screen questions test that experience.
None of these is proof on its own; opt-outs, name changes and renewals in progress are ordinary. When the check does not confirm the credential, pause, ask the candidate, verify again through PMI, and apply the same rule to every candidate at the same stage. If you conclude a credential was misrepresented, follow your own process for misrepresentation (see resume fraud red flags and how to report candidate fraud). PMI's ethics page describes a formal ethics complaint process run by its Ethics Review Committee, and its handbook applies the code of ethics to certification holders and applicants.
Does a registry match prove the candidate is the PMP?
No. A registry entry confirms that someone with that name holds the credential; it does not prove that the person on your video call is that someone, and common names return several matches. Match the name to your identity step before the offer (the candidate identity verification checklist covers the options), and use the badge link the candidate shares from their own account, which ties the credential to an account they control.
How often should you re-verify a PMP?
Verify once before the offer or the client submittal. Re-verify when the role or a client contract requires a current PMP: at the end of the holder's three-year cycle, before a new assignment for contractors, and before you name the person on a bid. Credly badges show expiry, so the badge link the candidate gave you is the easiest way to re-check without asking them again.
When does the FCRA apply to a PMP check?
A search you run yourself on PMI's public registry is generally not a consumer report. If a background screening company verifies the PMP as part of its report, the Fair Credit Reporting Act applies: the standalone disclosure and written authorization before the check, and the pre-adverse and adverse action notices if the result counts against the candidate. The steps and forms are in the FCRA background check process for recruiters.
What should staffing agencies do?
- Verify before you submit. The agency is the party telling the client the candidate holds a PMP, so check it before the profile goes out.
- Check your contract. Some client contracts and government solicitations name the credential and how it must be shown; read yours rather than assuming a standard.
- Send the result, not the credentials. Write one line in the submittal, for example "PMP, active, confirmed in PMI's Certification Registry on [date]," and do not forward certification numbers or the candidate's PDF; the client can run its own registry search.
- Re-check contractors at each extension if the assignment requires a current PMP.
What should the verification record say?
A copy-ready record, one per credential (fill in your own details; the bracketed items are placeholders):
PMP verification record
Candidate name (as on PMI account): [name]
Credential: Project Management Professional (PMP)
Route used: [PMI Certification Registry / Credly badge link / PMI Customer Care]
Search details: country or region [ ], name searched [ ]
Result: [Active / not found / other status shown]
Badge shows issuer PMI and status: [yes / no / not used]
Cycle end or expiry date, if shown or provided: [date]
Mismatch and candidate's explanation: [none / details]
Checked by: [name], on [date]
Third-party screener used (FCRA steps followed): [no / yes, vendor and date]
If the same candidate claims other certifications, check them the same day with their issuers; the routes for CompTIA and Six Sigma belts are in how to verify CompTIA certifications and how to verify a Six Sigma certification.
Questions people ask
How do employers verify a PMP certification?
Search the candidate's name in PMI's online Certification Registry, which PMI says exists so employers and others can verify certification holders, or open the PMP digital badge link the candidate shares and use the badge's verify option on Credly. Confirm that the name, the credential and the status match the resume, and record the date and who checked. As of November 2026, the registry requires a country or region and takes a first and last name and an optional certification filter.
Why can't I find a candidate in the PMI registry?
PMI lets certification holders opt out of the registry, and its handbook says the absence of a name does not necessarily mean the person is not certified. Check the spelling and the country, try the name as it appears on the candidate's PMI account, and then ask the candidate for their Credly badge link or their PMI certificate and certification number. If you still cannot confirm it, contact PMI rather than relying on a PDF.
Can a candidate call themselves a PMP if their certification is suspended?
No. PMI's Continuing Certification Requirements Handbook says a holder who does not meet the renewal requirements in the three-year cycle is placed in suspended status for one year, and during that time may not refer to themselves as a certification holder or use the designation. If they do not renew within that year, the certification expires and they must reapply and retake the exam.
How often does a PMP have to be renewed?
Every three years. PMI requires PMP holders to earn 60 professional development units in each three-year cycle, report them and pay the renewal fee. A PMP verified as active today can lapse at the end of its cycle, so record the cycle end date if the role or a client contract requires the credential to stay current.
Do I need the candidate's consent to check the PMI registry?
A search you run yourself on PMI's public registry is generally not a consumer report. If a background screening company verifies the PMP for you, its report is a consumer report under the Fair Credit Reporting Act, so you need the standalone disclosure and the candidate's written authorization first, and the adverse action steps apply if the result counts against them. This is not legal advice.