How to

FINRA BrokerCheck for employers: how to verify a broker's registrations, exams and disclosures

On this page
  1. What does a BrokerCheck report show an employer?
  2. What does BrokerCheck leave out?
  3. Can employers use BrokerCheck data for hiring?
  4. How do you check a broker on BrokerCheck, step by step?
  5. When have a candidate's exams lapsed?
  6. What red flags show up on BrokerCheck?
  7. When does the FCRA apply?
  8. What should staffing agencies and recruiters do?
  9. A copy-ready BrokerCheck verification record
  10. Questions people ask

Employers verify a broker on FINRA BrokerCheck by searching the candidate's CRD number (or name with the employing firm or zip code) and reading the individual report: current and past registrations, qualification exams passed, the last 10 years of employment history, and disclosures such as "customer disputes, disciplinary events and certain criminal and financial matters." FINRA's summary of the BrokerCheck terms lists compliance among the permitted uses. The step employers most often miss is what BrokerCheck leaves out: under FINRA Rule 8312 it never shows the Form U5's "Reason for Termination" or internal review disclosures, so a FINRA member still has to read the candidate's last Form U5 itself under Rule 3110(e). Everything below is as of November 2026.

Not legal advice. Checked against FINRA's BrokerCheck pages, FINRA Rules 8312, 3110 and 1210 on finra.org, and the Texas State Securities Board's registration-check page, in November 2026. Broker-dealers have registration duties well beyond this page; confirm them with your compliance team.

This page is about reading BrokerCheck. Fingerprinting, the Form U4 criminal questions and statutory disqualification are in FINRA fingerprinting requirements; what to ask an advisor on the first call is in the financial advisor screening questions; advisers who are not brokers are in how to verify an investment adviser representative.

What does a BrokerCheck report show an employer?

SectionWhat FINRA says it showsSource
Registration history"A list of registered securities firms where the individual is currently and/or was previously registered"About BrokerCheck reports
Employment history"the last 10 years—both in and outside the securities industry"Same
QualificationsCurrent registrations or licenses and exams passed, with dates, but "not scores or failures"Rule 8312(b)
DisclosuresCustomer disputes, disciplinary events and certain criminal and financial matters; some "may involve pending actions or allegations that have not been resolved or proven"About BrokerCheck reports
CommentThe person's most recent comment, if anyRule 8312(b)
Former brokersShown for 10 years after registration ends, and longer if, for example, there was a final regulatory actionRule 8312(c)
FreshnessNew information is usually available "the next business day"BrokerCheck FAQ

For someone who is also an investment adviser representative, FINRA says adviser information comes from the SEC's Investment Adviser Registration Depository, and Rule 8312(d) lets FINRA release what the SEC's Investment Adviser Public Disclosure site already shows.

What does BrokerCheck leave out?

Rule 8312(g) lists information FINRA does not release through BrokerCheck, including:

  • Social Security numbers, residential history, physical descriptions and home addresses;
  • "Reason for Termination" from Section 3 of Form U5, and "Internal Review Disclosure" information from Section 7 of Form U5;
  • other Section 7 Form U5 events for three business days after FINRA processes the filing;
  • investigations or proceedings that were vacated or withdrawn, and information reported in error.

The BrokerCheck FAQ adds that it "does not disclose information that investment professionals have not reported or are not required to report," that some non-investment civil matters and misdemeanors are excluded, and that information may be expunged, most often by court order. FINRA also warns of limited data for people whose last registration ended before August 1999. The Texas State Securities Board says BrokerCheck "does not contain all of the disclosure information from the WEBCRD system" and offers the rest of the nonconfidential record through a public information request; other state regulators are listed on NASAA's contact page.

Can employers use BrokerCheck data for hiring?

FINRA's permitted uses summary allows use "for investor protection, academic, compliance or regulatory purposes," and gives the example of an insurance firm confirming that a person holds the registration needed to sell its products. It also says "any use of BrokerCheck or BrokerCheck data is governed by the Terms of Use, not this summary," so read the full terms. If you redistribute BrokerCheck data, the summary says to identify BrokerCheck as the source, link to it and its terms, tell recipients the terms apply, offer a way to report errors, and say when the data was compiled. Staffing teams that paste reports into client submittals should follow that, or send a one-line result and the direct link instead.

How do you check a broker on BrokerCheck, step by step?

  1. Ask for the CRD number. BrokerCheck's search help says you can search "by name, CRD/SEC number, employing firm (individual searches only) or zip code." The direct link is brokercheck.finra.org/individual/summary/ followed by the CRD number.
  2. Confirm identity, not just a name. Common names return several people; match the employing firm and location to the resume.
  3. Read registrations. Is the person registered today, with which firm and in which states? A "Series 7" on a resume is an exam, not a current registration.
  4. Check the exam dates against the lapse rule below.
  5. Compare the 10-year employment history with the resume, including non-securities jobs.
  6. Read every disclosure, including pending ones, and ask the candidate to walk you through each. Pending allegations are not findings.
  7. For dual registrants, also check the adviser record on the SEC's IAPD.
  8. At a FINRA member, run the full investigation. Rule 3110(e) requires the firm to "ascertain by investigation the good character, business reputation, qualifications and experience" of the applicant, review the most recent Form U5 within 60 days of filing the Form U4, and verify the Form U4 within 30 calendar days with at least a search of reasonably available public records.
  9. Record the result with the template below.

When have a candidate's exams lapsed?

Under FINRA Rule 1210.08, a person last registered as a representative (or principal) two or more years before FINRA receives a new application must requalify by exam, unless they kept their qualification under Rule 1240(c), FINRA's Maintaining Qualifications Program. The SIE lapses four years after the later of passing it or last registering as a representative. For a candidate who left the industry, the termination date on BrokerCheck tells you which side of the line they are on. State exams (Series 63, 65, 66) follow NASAA's rules; most states use a similar two-year rule, per NASAA's exam FAQ.

What red flags show up on BrokerCheck?

  • "Licensed broker" on the resume, "not currently registered" on BrokerCheck. Ask when and why the registration ended.
  • A resume job that is not in the 10-year history, or dates that differ by more than a few weeks.
  • Disclosures the candidate did not mention, or an account of them that does not match the report.
  • A bar or suspension. FINRA Rule 8312(c) keeps people with final regulatory actions on BrokerCheck beyond 10 years.
  • No record at all for someone who claims registration. FINRA's search help lists misspellings and wrong CRD numbers first, so check those before concluding anything.

Apply the same check to every candidate at the same stage, pause when something does not match, and verify through FINRA or the state regulator rather than through documents the candidate supplies. See candidate fraud in finance hiring for the wider pattern.

When does the FCRA apply?

Rule 3110(e) allows the public records search to be done "by the member or a third-party service provider." When a background screening company does it, or compiles BrokerCheck and court data into a report, that report is a consumer report: standalone disclosure, written authorization and the adverse action steps apply. See the FCRA background check process.

What should staffing agencies and recruiters do?

  • Remember who registers. Registration runs through the FINRA member firm that files the Form U4, so check your contract for who files, who fingerprints and who reviews the Form U5.
  • Check before you submit, and say what you checked: "CRD [number], registered with [firm] as of [date], [n] disclosures reviewed with the candidate, BrokerCheck viewed [date]."
  • Re-check before a start date if weeks have passed; Section 7 U5 events can appear after the three-day hold.

A copy-ready BrokerCheck verification record

BROKERCHECK VERIFICATION RECORD (example; adapt to your policy)
Candidate name / CRD number:
Viewed on BrokerCheck by: [name]   Date: [date]
Currently registered: [yes/no]  Firm: [ ]  States: [ ]
Exams passed and dates: [ ]   Last registration end date: [ ]
Lapse check (Rule 1210.08, two years): [within / outside / MQP]
Employment history matches resume: [yes / differences noted]
Disclosures: [none / number, type, discussed with candidate on date]
Dual registrant, IAPD checked: [n/a / date]
Form U5 reviewed by member firm (Rule 3110(e), 60 days): [date]
Third-party screener used, FCRA steps followed: [no / yes, vendor, date]

For other licenses the same candidate may hold, see how to verify an insurance license and professional license verification for recruiters. Not legal advice; checked as of November 2026.

Questions people ask

How do employers check a broker on FINRA BrokerCheck?

Search brokercheck.finra.org by the candidate's CRD number, or by name with the employing firm or zip code, and open the individual report. Read the current and past registrations, the qualification exams passed, the employment history for the last 10 years and every disclosure, then ask the candidate to explain anything that does not match the resume. FINRA says new information usually appears the next business day, as of November 2026.

Does BrokerCheck show why a broker left their last firm?

No. FINRA Rule 8312 says FINRA does not release the Reason for Termination reported in Section 3 of Form U5, or Internal Review Disclosure information from Section 7. A FINRA member hiring a previously registered person must review the most recent Form U5 itself, within 60 days of filing the new Form U4, under FINRA Rule 3110(e).

Is a Series 7 still valid if the broker has not been registered for a while?

Not after two years, in most cases. FINRA Rule 1210.08 treats a person last registered as a representative two or more years before a new application as needing to requalify by exam, unless they maintained their qualification under Rule 1240(c), FINRA's Maintaining Qualifications Program. The SIE result lapses four years after the later of passing it or last registering as a representative.

Can a recruiter put a BrokerCheck report in a client submittal?

Check FINRA's BrokerCheck terms first. As of November 2026, FINRA's permitted-uses summary allows investor protection, academic, compliance and regulatory uses, and says anyone who redistributes BrokerCheck data must identify BrokerCheck as the source, link to it and its terms, tell recipients the terms apply, give a way to report errors and say when the data was compiled. A one-line result with the source and date, plus the direct BrokerCheck link, is the simpler route.

Does BrokerCheck show everything on a broker's CRD record?

No. The Texas State Securities Board notes that BrokerCheck disclosure information does not contain all of the disclosure information in the CRD system, and that other nonconfidential CRD information may be available through a public information request to a state securities regulator. FINRA also excludes items such as Social Security numbers, residential history, U5 termination reasons and certain matters that were never required to be reported.