For hiring managers

What is a position number? Position number vs requisition number, with examples

On this page
  1. Position number vs. requisition number: what is the difference?
  2. Where do position numbers come from?
  3. What does a position number look like?
  4. How does a position number move through a hire?
  5. What about job codes and employee IDs?
  6. Why does the position number matter in hiring?
  7. What should recruiters and agencies do with position numbers?
  8. Common position number mistakes
  9. Questions people ask

A position number is the unique ID for one seat in an organization's structure, such as "Payroll Analyst, Finance, Chicago", and it exists whether the seat is filled or vacant. A requisition number is the ID for one approved request to recruit someone into an opening, and it closes when the hire is made. So a position number is permanent and belongs to the org chart and budget, while a requisition number is temporary and belongs to one hiring effort: the same position can have a new requisition every time it is refilled. Position numbers come from position management in HR systems such as Workday and PeopleSoft, and some governments use them too: California's State Administrative Manual gives each established state position a 13-digit number (as of November 2026).

This page explains how the two numbers relate, what position numbers look like, and how they move through a hire. For the requisition side in full, see what is a requisition number.

Position number vs. requisition number: what is the difference?

Position numberRequisition number
IdentifiesA seat in the organization (job, department, location, reporting line)One approved request to fill an opening
ExistsUntil the seat is abolished, filled or vacantFrom approval until the hire, cancellation or hold
Created byHR or finance, as part of the org structure and budgetThe hiring manager or recruiter, in the ATS or HR system
How many peopleUsually one at a timeOne or several identical openings
Changes when someone leavesNo: the same number becomes vacantA new requisition is opened for the backfill
Used forBudget control, payroll, org charts, headcount reportsRecruiting workflow, applicants, time to fill
Who sees itHR, finance, managers; often public-sector candidatesRecruiting, managers; often candidates

The link between them is simple: in a position-managed organization, every requisition is opened against a position number, and the person hired takes that position. When they later leave, the position becomes vacant again and a new requisition, with a new number, is opened to backfill it; see what is a backfill position.

Where do position numbers come from?

From position management, one of the ways HR systems control staffing. Two examples from vendors' public documentation, as of November 2026:

  • Workday. Its Concept: Staffing Models page describes two models. Position management "provides the greatest control over hiring": it requires you to specify the number of positions to fill and requires an open, approved position before you can hire, promote, transfer or demote workers. Job management has an unlimited number of openings and does not require a separate open position for each job. Workday's job requisition documentation adds that it generates a unique ID for each job requisition when the Create Job Requisition business process starts, and that job requisitions can be created for unfilled positions.
  • PeopleSoft (Oracle). The Creating Positions page defines the Position Number as "the unique number assigned to the position": you can type one, or accept the default 00000000 so the system assigns the next number when you save, and Oracle recommends doing one or the other, never both. The same page says the maximum head count defaults to 1 because positions normally have a one-to-one relationship with employees, and can be raised for job sharing. Understanding Positions says the system keeps an effective-dated history of all positions, whether or not they are filled.

Applicant tracking systems usually receive positions rather than create them. Greenhouse's article on evergreen jobs and HRIS integrations, for example, says each position or requisition that comes over from the HR system maps to a distinct Greenhouse job.

What does a position number look like?

There is no national standard. Some systems use a plain sequence; some build meaning into the number. A documented public example: California's State Administrative Manual section 8533 (revised September 2020) describes a 13-digit state position number made of a 3-digit agency code, a 3-digit reporting unit code, a 4-digit class code (the civil service class or exempt title) and a 3-digit serial number for the individual position, with the 900 series used for blanket positions.

Pattern (invented examples)What it encodes
00041287A plain system sequence, PeopleSoft style
POS-FIN-0193Prefix, department and sequence
123-456-1234-001Agency, unit, class code and serial, in the shape California's manual describes
P-200117A system ID with a letter prefix

How does a position number move through a hire?

Invented example. The numbers, names and dates are fictional.

  1. The position exists. Position 00041287, Payroll Analyst, Finance, Chicago, budgeted and held by an employee.
  2. The employee resigns. The position becomes vacant on May 31; its number does not change.
  3. A requisition is opened against it. REQ-2026-0518, approved June 3, linked to position 00041287, with the leaver named as the person replaced.
  4. Recruiting runs the search under the requisition number: posting, applicants, interviews and the offer.
  5. The hire takes the position. The new employee's job record carries position 00041287 and the requisition closes.
  6. Years later, the cycle repeats with a new requisition number and the same position number.

What about job codes and employee IDs?

IdentifierIdentifiesShared by
Job codeA type of job, with its grade and classificationEveryone in that job, across positions
Position numberOne seat using a job code in one department and locationUsually one person at a time
Requisition numberOne approved hiring request for an openingThe applicants to that search
Employee IDOne person, wherever they work in the companyNobody; it follows the person

Oracle's PeopleSoft job classification page puts the first distinction this way: job codes are different from positions, and within a single job code you can have a number of positions. Job codes are explained in what is a job code.

Why does the position number matter in hiring?

  • It proves the seat is funded. In position-managed organizations, a requisition without a vacant, approved position behind it should not be opened.
  • It sets defaults. Position records often carry the department, location, job code and reporting line, so the requisition and the new hire's record inherit them instead of being retyped.
  • It keeps headcount honest. Finance counts positions, filled and vacant; recruiting counts requisitions. Mapping one to the other is how the two reports agree. See the headcount planning template.
  • It shows what a backfill replaces. A requisition linked to a position number shows at a glance whether a hire is a replacement or a new seat.

What should recruiters and agencies do with position numbers?

Record both numbers on the job: the requisition number for the search and the position number for the seat. Put both on the offer approval, because HR uses the position number to set up the new hire. Agencies working with public-sector or university clients should copy the client's position number onto every submittal as well as the requisition or posting number, since the client's HR team may file applications by position. If a client gives you only a position number, ask for the requisition or posting number too, so your submittals land in the right search.

A requisition header that carries both (an example to adapt):

Requisition:     REQ-2026-0518
Position:        00041287  Payroll Analyst, Finance, Chicago
Position status: Vacant since 2026-05-31 (backfill)
Job code:        FIN-PA2   Payroll Analyst II, grade 7
Openings:        1
Hiring manager:  [name]   Approved by: [names, dates]

Common position number mistakes

MistakeWhat it causesFix
Using the position number as the requisition numberTwo searches for one seat share one recordNew requisition each time; link it to the position
Opening a requisition with no position behind itA hire with no funded seatMake the position a required requisition field
Hiring two people into one single-headcount positionPayroll and budget errorsCreate a second position or raise head count with approval
Mixing manual and automatic numberingDuplicate or skipped numbersPick one method, as PeopleSoft's documentation advises
Leaving abolished positions openVacancies that inflate headcount reportsClose positions when the seat is cut

Questions people ask

What is the difference between a position number and a requisition number?

A position number identifies a seat in the organization, such as one analyst role in one team, and it exists whether the seat is filled or vacant. A requisition number identifies one approved request to recruit for an opening and closes when the hire is made. The same position can have many requisitions over the years, one each time it is refilled.

Does every company use position numbers?

No. Position numbers come from position management, where every seat is created and approved in advance. Workday, for example, documents two staffing models: position management, which requires an open, approved position before you can hire, and job management, where an organization can hire without creating a separate position for each job.

Can one position number have more than one employee?

Usually a position holds one person, but systems allow exceptions. Oracle's PeopleSoft documentation says a position's maximum head count defaults to one because positions normally have a one-to-one relationship with employees, and can be raised for job sharing or for positions assigned to more than one person.

Is a position number the same as a job code?

No. A job code identifies a type of job, such as Accountant II, with its pay grade and classification, and many people can share it. A position number identifies one specific seat that uses a job code, in a given department and location. PeopleSoft's documentation puts it as: within a single job code, you can have a number of positions.

Where does a candidate see a position number?

Some employers print it on job postings or offer letters, particularly those that budget seat by seat, such as many public employers; others show only a requisition or job ID. Either number helps the recruiter know exactly which opening you mean, so quote it when you follow up.