For hiring managers

What is a recruitment funnel? The stages, the metric at each stage, and how it differs from a pipeline

On this page
  1. What are the stages of a recruitment funnel?
  2. How do sourcing and agency funnels differ?
  3. How do you measure a recruitment funnel? A worked example
  4. How is a recruitment funnel different from a pipeline, a talent pool and the candidate journey?
  5. Why does the funnel matter for compliance?
  6. Which funnel stages does the hiring manager control?
  7. What are the most common recruitment funnel mistakes?
  8. A copy-ready funnel stage definition sheet
  9. Questions people ask

A recruitment funnel is the sequence of stages candidates pass through on the way to a hire, from people seeing a job, through application, screening, interviews and an offer, to the start date, with fewer people at each stage. It is a measurement model: counting how many candidates reach each stage, and dividing each count by the one before, shows where candidates drop out and whether the cause is the job's reach, the screen, the interviews, speed or the offer. Applicant tracking systems report it under their own names; Greenhouse, for example, calls the share of candidates moved from one stage to the next the "pass rate" in its pipeline report (as of November 2026).

What are the stages of a recruitment funnel?

The stages vary by employer, but most in-house funnels have the seven below. Each stage needs a definition by an event the system records, not by a recruiter's impression, or the numbers cannot be compared between jobs.

StageA candidate reaches it whenMetric at this stageDetailed page
1. AttractThey view the job ad or receive outreachViews or contacts by sourceSource of hire tracking
2. ApplyThey submit an application, or reply with interestApplication completion rate (completed ÷ started)Application completion rate
3. ScreenA recruiter reviews them or holds a phone screenScreen pass rateWhat is a phone screen
4. InterviewThey complete a first interview with the hiring teamScreen-to-interview conversion; interviews per hireInterview-to-hire ratio
5. OfferAn offer is extendedInterview-to-offer ratioInterview-to-offer ratio
6. AcceptThe candidate acceptsOffer acceptance rateOffer acceptance rate
7. StartThey work their first dayHires ÷ applicants (yield); time to hireSelection ratio, time to hire vs time to fill

Some teams add a stage after the start date for early performance, which is where quality of hire takes over from the funnel.

How do sourcing and agency funnels differ?

The shape is the same; the stages before and around the interview change.

  • Sourcing (outbound) funnel: identified, contacted, replied, interested, screened, then the in-house stages. The metrics that matter most are reply rate and replied-to-screened, because the candidate did not choose to apply.
  • Staffing agency funnel: job order, candidates screened, submitted to the client, client interview, offer, placement, and the guarantee or assignment period. Submittal-to-interview is the stage agencies watch most; see how to improve the submittal-to-interview ratio, time to submit and recruiting agency metrics.
  • High-volume hourly funnel: often skips the recruiter screen and goes from application to a scheduled interview or assessment, so application completion and no-show rates carry most of the signal.

ATS products build these stages into their pipelines. Greenhouse's documentation, for example, says every job's interview plan starts with an application review stage and ends with an offer stage, and it groups stages into standard milestones: Application, Assessment ("the first stage that is not application review or hiring manager review"), Face to Face, Offer and Hired (Greenhouse milestones, as of November 2026).

How do you measure a recruitment funnel? A worked example

Two numbers come from every pair of stages. Stage conversion is the count at a stage divided by the count at the stage before it; cumulative conversion is the count at a stage divided by the count that entered the funnel. The figures below are an example for one requisition, invented to show the arithmetic.

Stage (example)CandidatesStage conversionCumulative from applied
Applied400-100%
Screened8080 ÷ 400 = 20.0%20.0%
First interview2424 ÷ 80 = 30.0%6.0%
Final interview66 ÷ 24 = 25.0%1.5%
Offer33 ÷ 6 = 50.0%0.75%
Accepted22 ÷ 3 = 66.7%0.5%
Started22 ÷ 2 = 100%0.5%

Read the example this way: two of three offers accepted points at the offer or the speed before it, and a 25 percent first-to-final conversion is worth a look at whether the screen lets through people the hiring manager would never advance. Run backwards, the cumulative 0.5 percent says this job needs about 200 applicants per hire if nothing changes; the recruiting forecast model turns that into a sourcing plan. Cohort counting, rejected versus withdrew, and comparing quarters are covered in pipeline conversion rates by stage.

One counting rule to settle early: some ATS reports count a candidate in every stage they skipped. Greenhouse's pipeline history report notes that its total column "will also count candidates who never actually moved into that specific stage" (Greenhouse). Know which rule your report uses before comparing it with a spreadsheet.

How is a recruitment funnel different from a pipeline, a talent pool and the candidate journey?

TermWhat it isUsed for
Recruitment funnelA model of the stages candidates pass through and the drop-off between themMeasuring and fixing the hiring process
Requisition pipelineThe candidates currently in process for one open jobDay-to-day work on a req
Talent pipelineA short list of engaged, assessed people kept warm for roles you expect to fillFuture hiring; see what is a talent pipeline
Talent pool or communityA wider group of people who have shown interestNurture and re-engagement; see what is a talent community
Candidate journeyThe same stages seen from the candidate's side: messages, waits, interviewsCandidate experience; see how to improve candidate experience

Why does the funnel matter for compliance?

Every stage after the application is a selection step, and two federal rules apply to it:

  • Records. Employers covered by Title VII, the ADA and GINA must keep "application forms submitted by applicants and other records having to do with hiring" for one year from the date of the record or the personnel action, whichever is later (29 CFR 1602.14). Stage data in the ATS is part of that record.
  • Each step can be challenged. In Connecticut v. Teal, 457 U.S. 440 (1982), the Supreme Court held that a balanced bottom line does not defeat a disparate impact claim about one step. How to check each stage is on the four-fifths rule.

Federal contractors once had an extra definition of who counts as an applicant online; that OFCCP rule was removed on October 26, 2026, as explained on the internet applicant rule.

Which funnel stages does the hiring manager control?

More than most dashboards suggest. The recruiter owns reach and the screen, but the stages with the biggest swings usually sit with the hiring team:

  • Screen to interview: how quickly the manager reviews profiles and offers interview slots. A slow review shows up as withdrawals, not rejections.
  • Interview to offer: whether the interviewers score against the same criteria; see what is a hiring rubric. Low conversion here often means the brief and the screen disagree about what "qualified" means.
  • Offer to accept: the time from the final interview to the offer, and whether pay and start date were tested before the offer went out.

Reviewing the funnel together each quarter, stage by stage with the counts, turns a recruiting metric into a shared one.

What are the most common recruitment funnel mistakes?

  • Stages defined differently by each recruiter, so "screened" means a resume glance on one desk and a 30-minute call on another.
  • Only percentages, no counts. Late stages hold a handful of people; one candidate moves the rate a lot.
  • Mixing rejected and withdrew. A rejection points at the screen or the brief; a withdrawal points at speed, pay or communication.
  • Reading the bottom line only. A healthy overall yield can hide one stage that loses most good candidates, or screens out one group.
  • Optimizing the top. More applicants is rarely the fix when the drop happens after the interview; see how to handle candidate ghosting for the later-stage losses.

A copy-ready funnel stage definition sheet

RECRUITMENT FUNNEL STAGE DEFINITIONS (example; agree once, use for every req)
Team / role family: _______________   Effective from: __/__/____

Stage        Entry event (recorded in ATS)        Owner        Target time in stage
Attract      Job posted / outreach sent           Recruiter    ________
Apply        Application submitted / reply        Candidate    ________
Screen       Screen call held or review logged    Recruiter    ____ business days
Interview    First hiring-team interview held     Hiring mgr   ____ business days
Offer        Offer extended in writing            Recruiter    ____ business days
Accept       Written acceptance received          Candidate    ____ days
Start        First day worked                     HR           ________

Exit types (one per exit): rejected | withdrew | no response | hired elsewhere
Counting rule: [ ] stages skipped are counted  [ ] only stages entered
Report: counts and stage %, cumulative %, median days in stage, by quarter
Signed off by: recruiting lead ________  hiring manager ________

The sheet is an example to adapt. Agreeing it before the quarter starts is what makes next quarter's funnel comparable with this one.

Questions people ask

What are the stages of a recruitment funnel?

A typical recruitment funnel runs from attraction (people see the job), to application, screening, interviews, offer, acceptance and start. Sourcing funnels add stages before the application, such as contacted and replied, and staffing agency funnels add submittal to the client and client interview. The exact stages matter less than defining each one by an event every recruiter records the same way.

How do you calculate conversion in a recruitment funnel?

Divide the number of candidates who reached a stage by the number who reached the stage before it, counting the same group of candidates. For example, if 80 candidates were screened and 24 of them reached an interview, screen-to-interview conversion is 24 divided by 80, or 30 percent. Dividing hires by everyone who entered the funnel gives the overall yield.

What is the difference between a recruitment funnel and a talent pipeline?

A recruitment funnel describes how candidates move through the stages for open jobs and how many drop out at each stage. A talent pipeline is a short list of engaged, already-assessed people kept warm for roles you expect to fill later. The funnel is a measurement model of a process; the pipeline is a set of people.

Why does the recruitment funnel matter for compliance?

Because each stage is a selection step. Federal law requires covered employers to keep hiring records, including applications from people not hired, for at least one year, and an employer can face a disparate impact claim about a single stage even when the overall hiring numbers look balanced, as the Supreme Court held in Connecticut v. Teal. Tracking each stage makes both easier to check.