How to

How to verify a boiler operator license: state and city lookups, license grades and plant-specific licenses

On this page
  1. Who licenses boiler operators?
  2. Where do you check the license?
  3. How do you verify a boiler operator, step by step?
  4. How do you match the license class to your boilers?
  5. Which licenses are tied to one plant?
  6. What else do candidates list, and does it replace a license?
  7. What does the employer have to do?
  8. What does a fake or lapsed boiler license look like?
  9. When does the FCRA apply?
  10. What should staffing agencies do?
  11. A copy-ready boiler operator verification record
  12. Questions people ask

There is no federal boiler operator license. Where boiler operators and stationary engineers are licensed, a state agency or a city issues the license, so you verify it on that jurisdiction's own lookup: for example, Minnesota's Department of Labor and Industry lets anyone check a license in its iMS license lookup as a guest, and New York City's Department of Buildings links a High Pressure Boiler Operating Engineer license status check. Read the license class or grade, the status and the expiration date. The step employers most often miss is matching the class to the plant: licenses are graded by boiler pressure, horsepower or heating surface, and some special licenses are good for one named plant only. As of November 2026.

Not legal advice. Checked against Minnesota Statutes 326B.972 and 326B.978 and the Minnesota DLI licensing and lookup pages, Ohio Revised Code 4104.05, 4104.19 and 4104.99 and the Ohio Division of Industrial Compliance license page, New York City Department of Buildings license pages, and Massachusetts General Laws chapter 146, sections 46, 49 and 56, in November 2026. We could not open the Massachusetts Department of Fire Services' own pages, which block automated access, so the Massachusetts facts below come from the statute only.

This page is the license check. To find and screen candidates for the role, see the maintenance technician screening questions and the boiler and stationary engineer strings in the Boolean search strings for maintenance technicians.

Who licenses boiler operators?

States and cities, each under its own law, and the license names differ: boiler operator, stationary engineer, steam engineer, high pressure boiler operating engineer, fireman. Four examples, each from the statute or the agency:

JurisdictionWho must be licensedLicense typesRenewalSource
Minnesota"To operate a boiler, steam engine, or steam turbine an individual must have received a license for the grade covering" itChief, first class and second class engineer, each Grade A, B or C; special engineer; plant-specific provisional licensesEvery two years, at the end of the month the license was issuedMinn. Stat. 326B.972, 326B.978; DLI boiler engineer licensing
OhioOperators of low pressure steam boilers and power boilers over 360 square feet of heating surface, and stationary steam engines over 30 horsepower, unless working under the direct supervision of a licenseeLow pressure boiler operator, high pressure boiler operator, steam engineerLicenses expire one year after issueORC 4104.05, 4104.19
New York CityOperators of high pressure boilers in the cityStationary and portable High Pressure Boiler Operating EngineerThree-year termNYC DOB
MassachusettsAnyone in charge of or operating a steam boiler or engine, with exemptions (for example private residences, boilers under nine horsepower, and boilers with an approved device limiting pressure to 15 psi)First, second and third class engineer; first and second class fireman; plant-specific special licensesEvery five years, with 30 hours of continuing education (6 for special licenses)M.G.L. c. 146, s. 46, s. 49

If neither your state nor your city licenses boiler operators, there is no license to verify; qualify the operator on experience and your own evaluation, and check with the boiler's insurer and the state boiler inspection office what they expect of the person in charge.

Where do you check the license?

  • Minnesota: the DLI license and registration lookup says no account is needed: choose "Continue as guest" in iMS and enter the full license number, or search license holders. DLI also publishes a boiler license spreadsheet that it updates nightly, and says current, active licenses "will have a status of 'Issued.'"
  • New York City: the DOB Check License & Registration Status page and the boiler engineer page both link the Buildings Information System licensee search.
  • Ohio: licenses are issued through the Division of Industrial Compliance's customer portal (license page). We did not find a public search for boiler licenses on the Division's pages, so contact the Division to confirm a license.
  • Massachusetts: the statute assigns examinations to the Department of Fire Services' inspectors (c. 146, s. 56); contact the department to confirm a license.

How do you verify a boiler operator, step by step?

  1. Ask for every license with its jurisdiction, class or grade, number and expiration. A neutral line: "I confirm boiler licenses with the issuing agency before I submit anyone. Which licenses do you hold, and in which state or city?"
  2. Write down what your plant needs: high or low pressure, steam or hot water, total horsepower or heating surface, any engines or turbines, and the attendance the law requires.
  3. Search the issuing agency's lookup yourself and confirm name, number, class, status and expiration. A photo of a license card is a lead, not a verification.
  4. Match the class to the plant using the statute's own limits (next section).
  5. Check plant-specific licenses. A special or provisional license may be tied to another employer's plant.
  6. If the license is from another state, ask whether the candidate has applied in yours and on what basis, and do not schedule unsupervised shifts until your jurisdiction's record shows the license.
  7. Record the result with the template at the end and calendar the expiration.

How do you match the license class to your boilers?

Read the class against the statute, not the job title. Examples from the text, as of November 2026:

  • Minnesota (326B.978): high pressure means steam over 15 psig, or water over 160 psig or 250 degrees Fahrenheit. A chief engineer Grade A may take charge of all classes of boilers, engines and turbines; a first class engineer of plants of not more than 500 horsepower, or shift engineer in a plant of unlimited horsepower; a second class engineer of not more than 100 horsepower; a special engineer of not more than 50 horsepower. Grade C licenses are limited to low pressure boilers, and Grade B licenses do not cover engines and turbines.
  • Massachusetts (c. 146, s. 49): a first class engineer may "have charge of and operate any steam plant"; a second class engineer may "have charge of and operate a boiler or boilers, and to have charge of and operate engines, no one of which shall exceed 150 horsepower"; a third class engineer, boilers of not more than 150 horsepower in the aggregate when solid fuel is burned, or 500 horsepower when the heat comes from liquid or gaseous fuel, electricity or another source, plus engines of not more than 50 horsepower each. A first class fireman may have charge of boilers whose safety valves are set to blow at not more than 25 psi.
  • Ohio (4104.05): a low pressure boiler operator license does not cover a power boiler over 360 square feet of heating surface; that takes a high pressure boiler operator or steam engineer license, and a stationary steam engine over 30 horsepower takes a steam engineer license.

Which licenses are tied to one plant?

Two examples where a valid license may still not let the candidate run your boilers:

  • Massachusetts special licenses are granted to a person who "desires to have charge of or to operate a particular steam plant," on a written request signed by its owner or user, "for such service, and no other." They cannot cover an engine over 50 horsepower or boilers over 250 horsepower in the aggregate.
  • Minnesota provisional licenses let a second class Grade A or B engineer operate boilers over 500 horsepower "at only that boiler plant," on an application signed by the plant's chief engineer and an authorized representative of the owner; they last 36 months and cannot be renewed (326B.972(d) to (g)).

What else do candidates list, and does it replace a license?

New York City's license requirements show how other credentials fit: holding ASME's Qualifications of High Capacity Fossil Fuel Operator (QFO) certification, a National Board of Boiler and Pressure Vessel Inspectors commission, a marine engineer certificate from the U.S. Coast Guard or a high pressure license from another jurisdiction, each with the stated years of experience, is a route to sitting the city's written and practical exams. None of them is the city license itself. Treat these credentials as experience to verify with their issuer, and the local license as the pass/fail item.

What does the employer have to do?

  • Massachusetts puts it on the owner or user: it "shall not operate or cause to be operated a steam boiler or engine" for more than one week "unless the person in charge of and operating it is duly licensed," and sets periodic, noncontinuous or continuous attendance by horsepower (s. 46). One unlicensed person may work under the personal direction of each licensed person to operate a boiler's appurtenances.
  • Ohio allows operation under the direct supervision of a licensee, and makes a violation of 4104.05 a minor misdemeanor (ORC 4104.99).
  • New York City asks a licensee who is responsible for boilers to file, at renewal, updated boiler inspection certificates and "a notarized affidavit detailing the responsibility of boilers from your employer on company letterhead" (DOB renewal page). Expect that request if you hire one.

What does a fake or lapsed boiler license look like?

  • A number the lookup cannot find, or one that returns another name or a status other than active (in Minnesota, anything but "Issued").
  • A class below your plant, such as a low pressure or Grade C license for a high pressure steam plant.
  • A special or provisional license from another employer's plant presented as a general license.
  • An out-of-state license only, for a job in a state or city that licenses operators.
  • An expired date on an annual (Ohio) or two-year (Minnesota) license.
  • A training-course certificate offered as a license. Ohio, for example, credits approved boiler courses toward experience, but the license comes only after the state exam.

Pause, ask the candidate, confirm with the agency, and apply the same steps to everyone at that stage. If you conclude a license was misrepresented, follow how to report candidate fraud and tell the issuing agency.

When does the FCRA apply?

A lookup you run yourself on an agency site is a public-record check. If a background screening company verifies the license for you, its report is a consumer report, so the disclosure, authorization and adverse action steps in the FCRA background check process apply.

What should staffing agencies do?

  • Get the plant details from the client before you search: pressure, horsepower, engines or turbines, and the attendance rule.
  • Verify per jurisdiction before you submit: "[State or city] [class] license #[number], status [ ], expires [date], checked on [lookup] on [date]."
  • Do not place an unlicensed worker on a supervised basis unless the client's state allows it and a licensee is actually on duty; put the supervision arrangement in writing with the client.
  • Check your contract for who verifies licenses and how often, rather than assuming a standard.

A copy-ready boiler operator verification record

BOILER OPERATOR VERIFICATION RECORD (example; adapt to your policy)
Candidate name:
Plant: [address]  Pressure: [high / low]  Steam or hot water: [ ]
Total horsepower or heating surface: [ ]   Engines or turbines: [ ]
Jurisdiction that licenses operators here: [state / city / none]
License claimed: [jurisdiction, class or grade, number, expiration]
Lookup used: [name, URL]  Searched by: [name]  Date: [date]
Result: [status, class, expiration]
Class covers this plant: [yes / no, why]
Plant-specific (special or provisional) license: [no / yes, which plant]
Other credentials claimed (QFO, commission, other state): [verified with issuer on ]
Supervision arrangement, if allowed by law: [ ]
Third-party screener used, FCRA steps followed: [no / yes]
Next check: [expiration date]

Refrigeration and air-conditioning credentials for the same crew are covered in how to verify an HVAC license and how to verify an EPA 608 certification; the general method is in professional license verification for recruiters. Not legal advice; checked as of November 2026.

Questions people ask

How do I verify a boiler operator license?

Search the license on the lookup run by the state or city that issued it. There is no federal boiler operator license. Minnesota's Department of Labor and Industry, for example, lets anyone check license status in its iMS system as a guest, and New York City's Department of Buildings links a High Pressure Boiler Operating Engineer license status check. Read the class or grade, the status and the expiration date, and confirm the class covers your plant, as of November 2026.

Is a boiler operator license from one state valid in another?

Generally no; each state or city licenses operators for its own jurisdiction. Some offer a route for people licensed elsewhere: Ohio's statute, ORC 4104.19(H), says the superintendent of industrial compliance shall issue a license under Ohio's Chapter 4796 to an applicant who holds a license in another state, and New York City accepts five years under an acceptable high pressure license from another jurisdiction as one qualifying route to its own exam. The operator still needs the license where your boilers are.

What does a special boiler license cover?

It depends on the state, and in some states it covers only one plant. In Massachusetts, a special license is granted on the plant owner's written request for that particular steam plant 'and no other,' and cannot cover an engine over 50 horsepower or boilers over 250 horsepower in the aggregate. In Minnesota, a special engineer license covers boilers of not more than 50 horsepower or shift work in a plant of not more than 100 horsepower.

How often do boiler operator licenses renew?

Each jurisdiction sets its own cycle. As of November 2026, Minnesota boiler licenses expire every two years, Ohio licenses expire one year after issue, New York City High Pressure Boiler Operating Engineer licenses have a three-year term, and Massachusetts law requires renewal every five years with 30 hours of continuing education, or 6 hours for special licenses.

Can an unlicensed worker operate a boiler under supervision?

Only where the law allows it. Ohio lets a person operate covered boilers while working under the direct supervision of a licensed steam engineer or boiler operator, and Massachusetts allows one unlicensed person under the personal direction of each licensed person to operate a boiler's appurtenances. Check your own state's and city's rule before you staff a shift that way.